Sherwood SRB5700, SRB5100 manual Specifications, First Stage Regulator, B. Second Stage Regulator

Page 6
2.0SPECIFICATIONS

2.0SPECIFICATIONS

2.1SPECIFICATIONS FOR THE SRB5900 BLIZZARD, SRB5700 OASIS, AND SRB5300 MAGNUM

 

REGULATOR MODEL:

Sherwood SRB5900 Blizzard, SRB5700 Oasis,

 

 

SRB5300 Magnum

 

AIR FLOW:

33 cu. ft. (935 liters)/min. @ 1 atmosphere

 

INHALATION RESISTANCE:

.9" (2.3 cm) w.c @ 1 atmosphere

 

EXHALATION RESISTANCE:

0.7" (1.8 cm) w.c. max. @ 1 atm.

 

RECOMMENDED LUBRICANT:

LTI Christo-Lube®

A.

First Stage Regulator:

 

 

TYPE:

Flow-by piston with Moving Orifice Balancing and Dry Air

 

 

Bleed – U.S. Pat. # 4,226,257

 

WEIGHT:

1 lb. 11 oz. (.77kg)

 

INTERSTAGE PRESSURE:

135 -150 psi (9-10 bar)

 

MAXIMUM INLET PRESSURE:

232 Bar for SRB5900CE, SRB5700CE,

 

 

and SRB5300CE Models

 

POSITIVE AIR PURGE

 

 

FLOW RATE:

13-27 cc/minute

 

# LOW PRESSURE PORTS:

4 (3/8"-24 UNF)

 

# HIGH PRESSURE PORTS:

2 (7/16"-20 UNF)

 

MATERIALS:

Body – CDA-360 Brass

 

 

O-ringsBuna-N

 

 

Bleed Valve – Ethylene Propylene

 

 

Piston Seat – Teflon®

B.Second Stage Regulator:

TYPE:

Downstream valve, diaphragm, Variable Fulcrum –

 

U.S. Pat.#3,991,785

WEIGHT:

5.1 oz. (.15 kg) ( w/o hose)

HOSE LENGTH:

31 in. (.79 m)

MATERIALS :

Cover –Thermoplastic vinyl

 

Case –Thermoplastic Triax®

 

Poppet Seat – Buna-N

 

Poppet Seat – Buna-N

 

O-RingsBuna-N

 

Diaphragm – Tufel® (clear blue)

 

Exhaust Valve – Thermoplastic elastomer (blue)

 

Mouthpiece – C-Flex®

Maximum certified depth is 50m

3

Image 6
Contents SRB5300 Assembly & Maintenance GuideREGULATORS SRB5900ITEM # CATALOG #DESCRIPTION 3.0 O-rings Reference Chart TABLE OF CONTENTSPage 1.0 Introduction 2.0 Specifications 6.0 Helpful Hints1.0 INTRODUCTION Page 2.0 SPECIFICATIONS First Stage RegulatorB. Second Stage Regulator 2.2 SPECIFICATIONS FOR THE SRB5100 BRUT REGULATOR U.S. Pat. # 4,226,257U.S. Pat. #3,991,785 3.0 O-RINGS REFERENCE CHART 4.0 FIRST STAGE PROCEDURES 4.2 DISASSEMBLY OF FIRST STAGE4.1 TOOLS REQUIRED FOR FIRST STAGE SERVICING Photo #1 Photo #2 Photo #3 4.3 ASSEMBLY OF FIRST STAGE 4.4 TESTING OF FIRST STAGE A. Before You Begin TestingB. Dry Air Bleed Flow Test C. Intermediate Pressure Test 5.0 SECOND STAGE PROCEDURES 5.2 DISASSEMBLY OF SECOND STAGE5.1 TOOLS REQUIRED FOR SECOND STAGE SERVICING 10. Remove the O-ring 21 from the adjustable orifice 5.3 ASSEMBLY OF SECOND STAGE 70 in. lbs. 8 joules5.4 SET- UP OF SECOND STAGE For the following adjustments, remove the cover and diaphragmPhoto #4 Photo #55.5 TESTING OF SECOND STAGE A. Inhalation Effort B. Exhalation EffortC. Leak Test D. External Air Leaks A. High Inhalation Effort at Depth 6.1 TROUBLESHOOTING REGULATORS6.0 HELPFUL HINTS B. Free FlowingC. Wet Breathing D. Humming or Buzzing During Inhalation6.4 HANDLING TIPS 6.2 PARTS CLEANING RECOMMENDATIONS6.3 COMMONLY USED CLEANING SOLUTIONS A. Pre-Dive ChecksB. Post-Dive Care 7.0 TWO YEAR WARRANTY AND MAINTENANCE INFORMATION 7.1 PROPER PROCEDURE FOR WARRANTY PAPERWORK7.2 SCHEDULED MAINTENANCE ITEM # All other names are trademarks of their respective owners 6204 Goodrich Road Clarence Ctr, New YorkALL PRODUCTS SUBJECT TO CHANGE WITHOUT NOTICE Part Number S-MAN2004