Pioneer DEH-50UB Operating this unit Tuner, Basic Operations, Receiving PTY alarm broadcasts

Operating this unit

Tuner	# You can also store the frequency in memory
	by pushing and holding MULTI-CONTROL right.

Basic Operations

Section

02

English

%Select a band

Press BAND/ESC.

# Band can be selected from among FM1, FM2, FM3 or MW/LW.

%Manual tuning (step by step)

Push MULTI-CONTROL left or right.

%Seek tuning

Push and hold MULTI-CONTROL left or right for about one second and release.

#You can cancel seek tuning by pushing MULTI-CONTROL left or right.

#If you push and hold MULTI-CONTROL left or right, you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

Notes

!This unit’s AF (alternative frequencies search) function can be turned on and off. AF should be off for normal tuning operation (refer to the next page).

!RDS service may not be provided by all sta- tions.

!RDS functions such as AF and TA are only ac- tive when your radio is tuned to an RDS sta- tion.

Storing and recalling broadcast frequencies

You can easily store up to six broadcast fre- quencies for later recall.

!Six stations for each band can be stored in memory.

1 Press LIST.

Preset screen is displayed.

2Use MULTI-CONTROL to store the se- lected frequency in memory.

Turn to change the preset number. Press and hold to store.

3Use MULTI-CONTROL to select the de- sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press

BAND/ESC or LIST.

# If you do not operate the list within about 30 seconds, the display automatically returns to the ordinary display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts, the unit receives it automatically (ALARM ap- pears). When the broadcasting ends, the sys- tem returns to the previous source.

!An emergency announcement can be can- celed by pressing TA.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

3Turn MULTI-CONTROL to select the function.

BSM (best stations memory)—REGIONAL (re- gional)—LOCAL (local seek tuning)—

PTY SEARCH (program type selection)— TRAFFIC (traffic announcement standby)—AF (alternative frequencies search)—NEWS (news program interruption)

Notes

!To return to the previous display, press BACK.

!To return to the main menu, press and hold BACK.

En 11