Roland ME-70, G6037008-01 Using the Effects, COMP/FX Compressor/Effects, Type knob, Comp Pedal

Using the Effects

All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

Those companies are not affiliated with BOSS and have not licensed or authorized BOSS's ME-70. Their marks are used solely to identify the equipment whose sound is simulated by BOSS's ME-70.

COMP/FX (Compressor/Effects)

You can select from among a wide variety of original effects, such as those that equalize the volume levels, or extend the sound without distorting it (sustain).

TYPE knob

Use this to choose the type of compressor or effect.

1: COMP	This produces an effect that sustains the sound without
	distortion. It also works as a limiter to suppress loud peaks in
	the input signal.
2: T.WAH UP	This produces a wah effect matched to the intensity of picking.
3: T.WAH DOWN
4: SLOW GEAR	This removes the attack portion of the signal to create
	violin-like sounds.
5: DEFRETTER	This simulates a fretless guitar.
6: Single Hum	This changes a single-coil sound to a humbucker sound.
7: Hum Single	This changes a humbucker sound to a single-coil sound.
8: SOLO	This produces the optimal sound for solo playing in
	combination with OD/DS or PREAMP.

COMP Pedal

This switches the effect on and off.

TYPE	What the controls do
COMP	SUSTAIN	ATTACK	LEVEL
	This sets the sustain for the sound.	This sets the attack (onset) of the sound.	This sets the volume level of the effect.
T.WAH UP/	SENS	TONE	PEAK
	This sets the sensitivity of response to the	This sets the tone (brightness) of the wah.	This sets the intensity of the wah sound.
T.WAH DOWN
	input sound.
	SENS	ATTACK	LEVEL
SLOW GEAR	This sets the sensitivity of response to the	Adjusts the time needed for the volume	This sets the volume level of the effect.
	input sound.	to reach its maximum.
	SENS	TONE	LEVEL
DEFRETTER	This sets the sensitivity of response to the	This sets the tone.	This sets the volume level of the effect.
	input sound.
	LOW	HIGH	LEVEL
Single>Hum	This adjusts the tone of the low fre-	This adjusts the tone of the high fre-	This sets the volume level of the effect.
	quency range.	quency range.
	LOW	HIGH	LEVEL
Hum>Single	This adjusts the tone of the low fre-	This adjusts the tone of the high fre-	This sets the volume level of the effect.
	quency range.	quency range.
	LOW	HIGH	LEVEL
SOLO	This adjusts the tone of the low fre-	This adjusts the tone of the high fre-	This sets the volume level of the effect.
	quency range.	quency range.

E-4