EXITING FOUR HANDS MODE
To exit Four Hands Mode, press the SPLIT button again. The LED indicator will be turned off.
SELECTING SOUNDS IN FOUR HANDS MODE
The method for selecting sounds is the same as in Split Mode. After you are in Four Hands Mode simply use the SOUND buttons to change the sound for the upper section. To change the sound for the lower section, press and hold the SPLIT button and then use the SOUND buttons.
CHANGING SPLIT POINT
The method for changing the split point is the same as in Split Mode. After you are in Four Hands Mode press and hold the SPLIT button and press any key on the keyboard. The key you pressed becomes the lowermost note for the upper section. The default split point is set between E3 and F3.
OCTAVE SHIFT FOR THE LOWER SECTION
When in Four Hands Mode, you can use the Octave Shift function to change the octave of the lower section. Please see page 35 for more information on using Octave Shift.
2.5DUAL/SPLIT BALANCE SLIDER
You can adjust the volume balance between the two sounds in Dual or Split mode. Use the Dual/Split Balance slider to adjust the balance. Move the slider to the right to increase the volume of the rightmost sound (in dual mode) or upper sound (in split mode) and decrease the volume of the leftmost sound (in dual mode) or lower sound (in split mode). The balance changes in the opposite way when the slider is moved to the left.
2.6EFFECTS/REVERB
You might have noticed that when you select some of the preset sounds, the LED indicator for the EFFECTS or the REVERB is turned on. The reason for this is some of the preset sounds are set up with an effect on as their initial setting.
Adding an effect to the sound enhances tonal quality and improves acoustical realism. The CE200 piano is provided with two separate groups of effects. The first is reverb and the second contains chorus, delay, tremolo and rotary speaker.
Advanced Playing
ADVANCED PLAYING | 17 |