Kawai CE200 manual To ADD Reverb, To ADD Other Effects

Page 18

Advanced Playing

REVERB

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert hall. There are five types of reverb available. They are Room 1&2, Stage, and Hall 1&2. (listed in order of reverberation amount).

CHORUS

Chorus is an effect that simulates the rich character of a vocal choir or string ensemble, by layering a slightly detuned version of the sound over the original to enrich it.

DELAY

Delay is an effect that adds echoes to the sound.

TREMOLO

This is a vibrato type effect.

ROTARY

This effect simulates the sound of the Rotary Speaker cabinet commonly used with electronic organs. Rotary 1 is normal rotary and Rotary 2 is with distortion effect.

The soft pedal is used to change the speed of the rotor between SLOW and FAST.

TO ADD REVERB

Press the REVERB button. The LED indicator will be turned on to indicate that reverb is in use. Press and hold the REVERB button and the currently selected reverb type will be shown in the display.

Room 1

Room 2

Stage

Hall 1

Hall 2

To change the reverb type, use the VALUE buttons while holding down the REVERB button.

TO ADD OTHER EFFECTS

Press the EFFECTS button. The LED indicator will be turned on to indicate that the effect is in use. Press and hold the EFFECTS button and the currently selected effect will be shown in the display.

Chorus

Delay

Tremolo

Rotary 1

Rotary 2

18	KAWAI DIGITAL PIANO CE200

Image 18

Contents CE200 Page Important Safety Instructions Indicates a potential hazard that could result in injury Instruction for AC power cord U.K Declaration of Conformity Parts Provided Thank YOU for Purchasing a Kawai Digital PianoRead ME First Side Panel a Pcs Back Board B Pedal Board CBottom View Pedal Unit Fasten the main unit and the stand with four screws DAttaching the Headphone Hook Piano Music Jacks Supplying AC Power Assembling the StandPlaying the Piano Turning on the powerAdjust the volume level PedalsSelecting Another Preset Sound Playing with More SoundsPress the Sound Select button under the name About Polyphony Value ButtonsSelecting Split Sounds Entering Four Hands ModeFour Hands Mode Changing the Split PointChanging Split Point Exiting Four Hands ModeSelecting Sounds in Four Hands Mode Octave Shift for the Lower SectionTo ADD Reverb To ADD Other EffectsMellow VoicingNormal DynamicRhythm Metronome Starting the MetronomeChanging the Time Signature MetronomeAdjusting the Metronome Volume Recorded Information Basics of the RecorderTWO-TRACK THREE-SONG Recorder Sound selection Pedal movementsRecording Capacity Recording Another SongRecording REC Button Recorder and MetronomePress the PLAY/STOP button when you are finished recording Recording a Second PartPlaying Back a Song PLAY/STOP Button Status of Song and PartPlaying Back the Parts Separately Press the PLAY/STOP button again to stop play backErasing a Song Usingthe PLAY/STOP Buttonto Start RecordingErasing ALL the Songs Start flashingPiano Music Selecting the Touch Sensitivity Touch Button User Touch Transposing the Piano Transpose ButtonUser Memory / Factory Reset TuningMulti Timbral Mode BrillianceDamper Resonance TuningBrilliance Use the Value buttons to raise or lower the pitchString Resonance Press the Piano button while holding down the TouchAbout String Resonance Temperament Brief Explanation of TemperamentsEqual Temperament Piano only Werckmeister III Temperament Kirnberger III Temperament Pythagorean TemperamentMeantone Temperament Equal Temperament FlatKEY Signature of Temperament Lower Octave ShiftLocal Control ON/OFF Midi ChannelSending Program Change Numbers Use the Value buttons to change the channel numberMulti-Timbral On On1 and On2 MULTI-TIMBRAL Mode ON/OFFTransmit Program Change ON/OFF Multi-Timbral OffThen use the Value buttons to turn them on and off Channel MuteLower Pedal ON/OFF Can not be selectedLayer Octave Shift Layer DynamicsLayer Octave Shift can be set between -2 to Factory Reset User Memory / Factory ResetFollowing settings can be saved Damper HoldFunction Buttons Midi Jacks What is MIDI?Understanding Midi Midi ChannelBass Changing Transmitting Channel Using the CE200 Piano AS ControllerMidi Connection Electric Piano button while holding down the TouchAudio Connection Now You’re ready to playProgram Change Local Control ButtonsUsing the CE200 Piano AS a MULTI-TIMBRAL Sound Module MULTI-TIMBRAL Mode Using Midi About a USB Driver Windows XP / Me usersWindows 2000 / 98SE users Macintosh OS X users Users of Macintosh OS9 or earlierLine OUT Jacks Bottom ViewJacks Program Change Number Mapping Rhythm Style ListPiano Music List Front Panel Sound Demo Song ListSpecifications Midi Exclusive Data Format Midi Implementation Chart Kawai Digital Piano Model CE200Eng