![](/images/new-backgrounds/1255807/255807177x1.webp)
LINE IN jacks (1/4” phone jack)
These jacks are used to connect a pair of stereo outputs from other electronic instruments or audio equipment to the instrument’s speakers. The audio signal from these jacks bypasses the MASTER VOLUME control, however the the LINE IN level can be adjusted using the adjustment knob, or by adjusting the output level of the connected device. To connect a device in mono, connect the cable to the L/MONO jack only.
LINE IN STEREO jack (1/8” mini jack)
This jack is used to connect the stereo output from an external audio device, such as a CD or MP3 player, to the instrument’s speakers. The LINE IN adjustment knob cannot be used to adjust the LINE IN level, therefore please use the volume controls on device itself.
LINE OUT jacks (1/4” phone jack)
These jacks provide stereo output of the instrument’s sound to external speakers, amplifiers, mixers, recording devices, and similar equipment. The audio signal from the LINE IN jacks is also routed to these jacks. The MASTER VOLUME slider can be used to control the output level of the instrument’s own sound without affecting the level of the LINE IN signal. Mono signals will be output only if a cable is connected to the L/MONO jack.
PHONES jacks (1/4” phone jack)
These jacks are used to connect stereo headphones to the CA93/ CA63 digital piano. Two pairs of headphones can be connected and used simultaneously. When a pair of headphones is connected, sound will not be produced by the speakers.
USB to Host port (‘B’ type)
This USB port is used to connect the CA93/CA63 digital piano to a computer using an inexpensive USB cable. When connected, the instrument can be used as a standard MIDI device, allowing it to send a receive MIDI data. Connect a ‘B’ type USB connector to the instrument, and an ‘A’ type USB connector to the computer.
USB to Device port (‘A’ type)
This USB port is used to connect a USB memory device to the CA93/CA63 digital piano. This allows MP3/WAV audio files, and SMF song files to be playeddirectly. It is also possible to record performances to MP3/WAV audio files, and save recorder songs stored in internal memory for posterity.
MIDI IN/OUT/THRU jacks
These jacks are used to connect the CA93/CA63 digital piano to external MIDI devices, and also to a computer with a MIDI interface as an alternative to the ‘USB to Host’ port.
USB device information
The ‘USB to Device’ functionality of the CA93/CA63 digital piano conforms to USB2.0
The ‘USB to Device’ port is intended for connecting USB memory devices. USB floppy drive devices can be used to save recorder songs stored in internal memory, or play SMF song files, yet are not suitable for MP3/WAV audio file playback or recording.
It may be necessary to format the USB memory device before it can be used with the CA93/CA63 digital piano. If so, please refer to the ‘Format’ function instructions on page 81. Formatting the device will erase all data.
Avoid removing the USB memory device will data is being loaded or saved, files are being renamed or deleted, or the device is being formatted.
Other USB devices, such as computer mice, keyboards, or battery chargers etc. cannot be used with this instrument.
Appendix
89