American Dynamics ADCC1100 manual Partition Menu

Page 42

ADCC1100

Dis’bl

All

Enable

All

Enable

One

Cameras

Monitors

PTZ Control

Dis’bl Enter

One

Operator

Program Mode

Macros

Figure 4.6: Partition Menu

To Partition Cameras:

Cameras can be enabled or disabled individually, or all at once.

1.To disable a single camera, press the CAMERAS soft key to highlight the icon.

2.Enter the number of the camera from the alphanumeric keys, then press the DIS'BL ONE soft key.

3.To disable all cameras, press the CAMERAS soft key to highlight the icon.

4.Press the DIS'BL ALL soft key.

5.To enable a single camera, press the CAMERAS soft key to highlight the icon.

6.Enter the number of the camera from the alphanumeric keys, then press the ENABLE ONE soft key.

7.To enable all cameras, press the CAMERAS soft key to highlight the icon.

8.Press the ENABLE ALL soft key.

To Partition Monitors:

Monitors can be enabled or disabled individually, or all at once.

1.To disable a single monitor, press the MONITORS soft key to highlight the icon.

2.Enter the number of the monitor from the alphanumeric keys, then press the DIS'BL ONE soft key.

3.To disable all monitors, press the MONITORS soft key to highlight the icon.

4.Press the DIS'BL ALL soft key.

36

Image 42

Contents

ControlCenterTM Copyright Keyboard Installation and Operation Avertissement Elektromagnetische Kompatibilität Funkfrequenzemissionen Advertencia About the ADCC1100 Keyboard Programming with the ADCC1100 Keyboard Key Features About the ADCC1100 KeyboardADCC1100 Keyboard Overview Page Connection and Setup of the ADCC1100 Setting the Jumpers for the MP-KMISupplied Equipment Installation Connections for Cable Distance of Seven Feet or LessConnections for Cable Distance of Greater than Seven Feet Configuring for MP48, AD1024 or Quicksite Mode Keyboard Access Control Basic OperationsLogging on to the Keyboard Mode Welcome screenPlease Enter PIN Keyboard Menu Navigation Entering DataSelecting Monitors Calling a Camera to View on a MonitorControlling a Camera’s Pan, Tilt and Zoom Controlling Camera FocusControlling the Camera Iris Controlling Camera FlipAuto Iris Calling Presets Shots Running System ToursCalling a Scratch Pad Tour Acknowledging Alarms Calling SalvosAuxiliaries Setting the Keyboard Display BrightnessSetting the Keyboard Display Contrast Enabling or Disabling the Keyboard Audible WarningViewing Satellite Sites-Quicksite Mode Viewing Satellite SitesRunning Patterns Selecting and Running a MacroSelecting the Macro Running a MacroOperating a VCR or Digital Recorder VCR Control MenuSetting Presets Programming with the ADCC1100 KeyboardProgramming Dome Patterns Setting Scratch Pad Tours Dome Menu FunctionsNavigating Dome Camera Menus Dome Menu NavigationLocking and Unlocking a Camera Programming MacrosStage 1 Programming the Macro Page and Macro Icon Configure Macro Menu Programming a Macro Page NameStoring the Macro Page Configuration to the Smart Card Programming a Macro IconStage 2 Programming a Macro Example 1 Quick Switch function Advanced MacrosProgramming Smart Cards Reading a Smart CardProgramming a Smart Card Programming a New Smart CardConfiguring Partitions Copying Macro Information from One Smart Card to AnotherPartition Menu Page Matrix Menu Matrix MenuInstaller Functions Setting the Baud RateEnabling Lens Macro Keys Configuring for MP48, AD1024 or Quicksite Mode Quicksite ConfigurationConfiguring Satellite Sites Start EndReading Quicksite Settings on a Smart Card Copying Quicksite Settings from One Smart Card to AnotherAppendix a Monitor Arming Commands Monitor Arming Code Monitor Acronym Command SequenceAppendix B Macro Reference Sheet Keyboard Installation and Operation Appendix C Macro Icon Reference Numbers Keyboard Installation and Operation 100 Appendix D Troubleshooting Problem Check ListAppendix E Specifications Model NumbersIndex Keyboard Installation and Operation Running Multiple Macros Keyboard Installation and Operation Please visit our website for more information