EDITING TIME DIVISION
The Time Division feature works in conjunction with Note Repeat and the Arpeggiator. When Note Repeat or the Arpeggiator is enabled, the MPK61/MPK88 will output notes at a rate equivalent to the Time Division setting. To change to a new Time Division setting, press [TIME DIVISION] and select a new rate.
Please refer to the following illustrations to better understand how the Time Division feature works with Note Repeat and the Arpeggiator:
With an 1/8 note Time Division setting, the sequence will look like this.
With an 1/8T note Time Division setting, the sequence will look like this.
With a 1/16 note Time Division setting, the sequence will look like this.
With a 1/16T note Time Division setting, the sequence will look like this.
With a 1/32 note Time Division setting, the sequence will look like this.
With a 1/32T note Time Division setting, the sequence will look like this.
The following Time Division settings may be edited:
DEFAULT DIVISION – Describes the default time division which will be set when the current Preset is loaded. BUTTON MODE (TOGGL/MOTRY) – Describes whether the [TIME DIVISION] button functions in a momentary or toggle fashion.
1.To edit the Time Division setting, press the [EDIT] button to enter Edit Mode.
2.Now select Time Division for editing by pressing [TIME DIVISION].
3.You will see Page 1 displayed on the screen (shown on the left).
4.Press [ENTER] to edit the Time Division settings.
PRESS ENTER TO EDIT
DEFAULT TIME DIVISION
Each Preset can have a default Time Division setting which is set every time the Preset is loaded.
1.While in Default Time Division field, use [VALUE] dial to select Gate duration.
2.Use the [>] button to select the next field.
DEFAULT DIVISION FIELD
BUTTON MODE
In this field, you can select whether the [TIME DIVISION] button will behave in a momentary (MTY) fashion, where pressing the button will turn on the Time Division function and releasing it will turn it off, or in a toggle (TGL) manner, where pressing the button turns on the Time Division function and pressing again turns it off
1.Use the [>] button to select Button Mode field.
2.Turn [VALUE] dial to select the Button Type.
BUTTON MODE FIELD
26