Pioneer MEP-7000 M3U File, Track Selection with a USB Keyboard,  Track/folder jump

START PLAYBACK (Using normal connections)

M3U FILE

The MEP-7000 supports files in the m3u format.

Files with the extension m3u are treated the same as folders; when selected with the cursor, the recorded tracks are shown on the contents display in the form of a playlist.

MEMO

•Up to 100 m3u files can be displayed per device.

•Up to 300 tracks can be displayed for each m3u file. However, if a file exceeds 308 000 bytes, tracks loaded past that size cannot be displayed.

•M3U files are not supported using HFS/HFS+ file systems on USB storage devices.

•In the case of discs, short file name notation is not supported.

NOTE

•When this unit’s library function (P. 62) is used for browsing, m3u files will not be displayed.

•Since a variety of formats can coexist within an m3u playlist, it may not operate properly in all cases.

Keyboard Input Reference Table

TRACK SELECTION WITH A USB

KEYBOARD

By attaching a keyboard, track selection can be performed by inputting the initial character of the track or folder (track/folder jump), and playlist names can also be edited. Connect the keyboard to the USB1 or USB2 port.

Track/folder jump

1Use the TAB key to select the BROWSE screen.

2Use one of the F1 to F4 or F6 keys to select the source. Accessory DJS or other DJ software cannot be used for selection.

Jump is possible if the PLAYLIST is at the first hierarchical level (playlist name) or lower in the folder tree.

3Sequentially input the letters of the track name you wish to select.

The cursor will move to the first track with the matching string of characters. If folders exist at that level, the cursor will likewise jump to matching folder names.

4When the cursor is on the desired track name, press the ENTER key to confirm the selection.

The track menu will appear.

5Press the  key to select [LOAD A], and press the ENTER key. The track will begin playback.

Editing playlist names

1Use the TAB key to select the BROWSE screen.

2Use the F6 key to select the playlist screen.

3Use the  key to select playlist you wish to edit.

4Press shift + ENTER key to confirm the selection. The playlist menu will be displayed.

5Use the  key to select [RENAME], then press ENTER key. The edit mode will be enabled, allowing you to edit the playlist name.

6Edit the playlist name.

A playlist name can include up to 32 characters.

7When editing is completed, press the ENTER key.

The playlist will flash, signaling the completion of editing. For other keyboard operations, see the accompanying table.

English

Input	Jump to track name, folder name	Editing playlist
Alphabet	[Char input mode] Character input	[Char input mode] Character input
Numeral	[Char input mode] Character input	[Char input mode] Character input
Symbol	[Char input mode] Character input	[Char input mode] Character input
SPACE	Blank space input	Blank space input
ENTER	Enter lower level of selection cursor.	Confirm edit
	If cursor is on track name, open menu screen.
Shift+ENTER	If cursor is on track name, record track in PLAYLIST.	If cursor is on PLAYLIST (first level), open menu screen.
	If cursor is on folder, record folder contents in
	PLAYLIST.
Home	Cursor jump to top level of list.	—
End	Cursor jump to bottom level of list.	—
Page Up	Turn page of list (7 items above).	—
Page Down	Turn page of list (7 items below).	—
	Move cursor up.	Move cursor up.
	Move cursor down.	Move cursor down.

29

En