Vox E 1 owner manual Delay, Tape Echo T Echo, Multi Head Multi HD

1. OFF

Select this if you don’t want to use the delay effect.

2. DELAY

When this high quality digital delay effect is employed, the tone of each repeat is so good it is indistinguishable from the original note(s).

3. TAPE ECHO (T ECHO)

This is an incredibly accurate model of one of the most respected analogue tape echo machines ever made. In the original the “echo” is produced by a playback head and the exact “delay time” is set by varying the motor speed. Many profes- sionals prefer these “lo-fi” units because of the warm, dark echoes they produce.

4. MULTI HEAD (MULTI HD)

This is a model of a tape echo unit boasting three playback heads. Here we use two out of the three for a classic sound. Furthermore, each of the two resulting “echoes” (one from each head) has its own feedback loop. The result? A complex and warm “multi-tap” echo effect.

[1]	“TIME”	0...	2000	Makes a fine adjustment in a range of –64...+63[ms]
				relative to the current delay time.
[2]	“MIX”	0.0	...10.0	Adjusts the mix amount of the delayed sound.
[3]	“FEEDBACK”0.0...		10.0	Adjusts the amount of feedback.

WARNING! WARNING! If you crank up the FEEDBACK knob too much, an uncon- trollable, cascading “runaway” of echoes will occur. So, use your ears and your common sense when setting this!

TAP		0...2000	Sets the delay time. Press the TAP button twice at the
			desired interval.
(*)	TONE	1.0...10.0	(TAPE ECHO/MULTI HEAD) Adjusts the tone of the
			delay.
(*)	MODE	1, 2, 3, 4, 5 (MULTI HEAD) Specifies the combination of heads
			that will be used.

1:Conventional echo.

2: The delayed sound produces a rhythm of “ta-ta-ta (rest).”

3: The delayed sound produces a rhythm of “ta (rest) ta-ta.”

4: The delayed sound produces a rhythm of “ta-ta (rest) ta.”

5: The delayed sound produces a rhythm of “ta-ta-ta-ta.”

INPUT LEVEL: (EX)	This is the input level of the delay controlled by the
	optional foot controller.

REVERB DELAY MODULATION PEDAL CABINET AMP TYPE Amp/Effect TYPE

39