Vox E 1 owner manual Restoring the Factory Preset Programs

Restoring the Factory Preset Programs

ere’s how you can restore ToneLab’s programs and all its other settings to Hthe state in which it was shipped from the factory.

NOTE: This operation will permanently erase all the programs you’ve written or tweaked yourself. MIDI settings and settings you made in Manual Mode will also be erased. If there are any settings you want to keep, use Data Dump to back them up, or use a copy of the “Program Sheet” foldout at the end of this manual to make a note of your settings.

1.While holding down the three buttons ▲, ▼ (3.2), and TUNER/CANCEL (3.7), press the STANDBY button to turn on the power.

The bank display (3.1) “P” and the CHANNEL SELECT 1–4 buttons (3.3) will blink, and the name display (3.8) will ask “RELOAD?” Release the three but- tons you were holding down.

2.If at this point you decide that you really don’t want to execute this operation, you can press the TUNER/CANCEL button.

3.Press the WRITE/ENTER button (3.6). The name display (3.8) will show “LOADING,” and the factory-set data will begin being reloaded.

When reloading has been completed, the name display will indicate “COM- PLETE,” and ToneLab will automatically switch to Program Select Mode.

NOTE: Never turn off the power while this reload operation is occurring.

Tuner
Foot	Controller
MIDI/DIGITAL
Factory	settings
Trouble-	shooting
Spec.
Program	List

51