Selecting Programs or Manual Settings (Program Select Mode / Manual Mode)
hen playing your guitar through ToneLab, you can either select one of the W96 programs, or Manual mode. To learn how to select a program – or
Manual mode – read on!
PROGRAMS (Program Select Mode)
ToneLab has 96 programs (24 banks x 4 channels). Every one of these programs can be totally rewritten or “custom tweaked” to your heart’s content. With the fac- tory settings, the channels in banks
(Banks
In order to select programs, you need to be in Program Select Mode.
SELECTING A PROGRAM
As an example, here’s how to select program
1.Make sure that ToneLab is in Program Select Mode.
If the bank display shows a “
” (Manual Mode) or if any of the UTILITY (3.4), GLOBAL (3.5), WRITE (3.6) or TUNER (3.7) buttons are lit, ToneLab is NOT in Program Select Mode. Switch to Program Select Mode as described in “Getting to Program Select Mode” (p.16).
2.Use the BANK ▲, ▼ buttons (3.2) located below the bank display to select bank 2. The bank number will be blinking in the display.
3.Hit the channel 3 select button, and program
COOL PLAYING HINT: When you’re halfway through switching programs (i.e. you’ve selected the Bank but not the Channel), the program you’re about to change is still selected and will remain this way until you select the channel. So, if you’re playing live and your next program change requires you to switch to a different bank, you can select that bank ahead of time, ensuring a timely change.
STEP ON IT! If you’ve got the optional foot controller, you can recall a program with your foot.
| Introduction |
|
| Panel Tour |
|
| Setup |
|
|
|
|
|
|
|
| Program/ | Manual |
|
|
|
|
|
|
| Creating | and Storing |
|
|
|
15