Roland VC-1 D-50 owner manual Copying a Reverb Type

Page 35

Transferring Patches To and From the D-50/550

10.Touch <OK>. The bulk dump starts. If you want to cancel without executing, touch <Cancel>.

11.When the data transfer is completed, the D-50’s display shows “Complete.”

12.Press the [EXIT] button on the D-50 to return to the play mode.

Copying a Reverb Type

In addition to the patches (64 patches), 16 reverb types (17–32are also saved to the VC-1’s patch banks (Pre 1–6, Int 1–8). Different reverb types 17–32are saved to each patch bank. The reverb types you can use vary with the selected patch as described below.

•All shared common reverb types (1–16) can be used.

•The reverb types 17–32in individual banks can be used only with the patches (64 patches) contained in that bank.

•Reverb types from a bank other than the internal banks (any from 1 through 32) can be copied to a reverb type in the internal banks (any from 17 through 32).

•This is convenient when, for example, you want to use Reverb Type 25 (Gate Reverb) from the Patch Bank Pre 1 as Reverb Type 30 in the Patch Bank Int 1.

Common

Reverb Type

(NOT rewritable)

1 2 3 4

5 6 7 8

910 11 12

13 14 15 16

Preset Bank

Internal Bank

*Reverb Types (17–32) are transferred simultaneously with patch data when patch data is transferred from the D-50 to the VC-1 (bulk loaded) or from the VC-1 to the D-50 (bulk dumped).

1.Press [MODE] on the VC-1. The MODE MENU window appears.

2.Touch <DATA TRANSFER>. The DATA TRANSFER screen appears.

Pre1

Reverb Type

(NOT rewritable)

17 18 19 20

21 22 23 24

25 26 27 28

29 30 31 32

Int1

Reverb Type

(rewritable)

17 18 19 20

21 22 23 24

25 26 27 28

29 30 31 32

35

Image 35

Contents 03897845 ’05-3-1N Page Page Table of Contents Table of Contents Editing and Performances That Surpass the Original Main FeaturesIntroduction Perfect Simulation of the D-50’s TonesWhat is the digital synthesizer D-50? Number KEY Panel DescriptionsFront Panel Exit ModeShift Rear Panel Try Out the Sounds Turning On the PowerSelecting Patches and Playing Sounds Selecting Patches with Patch Palette Selecting Patches with the Value dialSelecting Patches from the List Enabling or Disabling the Beep Tone Viewing Various Information01ePatchFactorImage Applying Effects to the SoundKeys Functions Assigning Parameters to the ControllersControllers Parameters List OSC1, OSC2, COSM1, COSM2 and TVA Specify the Tones or the Partials to be appliedYou can control the following parameters Settings Common to All Screens How to Make the Patch FactorsSEP WholeDual SplitValue AfterPB Aftertouch, Pitch Bender Hold Hold ModeMode Portamento Mode Bend Bender RangeValue Display Function Output Output ModeMode Output Mode Revbal Reverb Balance Vol Total VolumeRevType Reverb Type Value Display DescriptionValue Time Chase Time Mode Chase ModeULL ULU Level Chase LevelSepCH Receive Channel in Separate Mode LTune Fine Tuning of the Lower ToneUTune Fine Tuning of the Upper Tone TxBS Transmit Bank Select SwitchNaming a Patch Saving Patches You’ve CreatedSaving Patches VC-1’s File Structure Reset to Default Factory SettingsTouch Factory RESET. The Factory Reset screen appears Transferring Patches from the D-50 to the VC-1 Transferring Patches To and From the D-50/550Transfer the patch from the memory card to the D-50/550 Using the D-50Using the D-550 Transferring Patches from the D-50/550 to the VC-1 Destination Bank Saving Transferred PatchesTouch Data TRANSFER. The Data Transfer screen appears DEC Source BankINC/+ or DEC Source Bank Transferring Patches from the VC-1 to the D-50/550Touch System 3-1 Copying a Reverb Type Value 17 Value1 Destination BankTemporary Area Overview of the VC-1Memory Structure Work AreaSynthesizer sound generator Basic Concept of a TonePartial Tone PCM sound generatorStructure Patch Ring ModulatorWG Wave Generator Structure of Tone ParametersLFO Low Frequency TVF Time Variant FilterTVA Time Variant Amplifier ENV Envelope GeneratorCreating a Patch How to Make the Patch SettingsCursor Buttons Useful Functions for EditingEditing a Value Undoing an editing OperationSilencing the Sound of the Partial Editing with the Panel Controls Partial SelectDisplay Value Copying Tone SettingsCancel TVF Copying Parameter SettingsALL CommonAuditioning the Sound Before Editing When Is set to All or Common Setting is ignoredPatch Factor Initializing Patch SettingsCtrl Setup Check AllEQ/CHORUS Tone ParametersCommon Parameters StructureVelo Velocity Range ENV Pitch EnvelopeENV Edit Envelope ENV Time EditENV Level Edit Pitch Mod Pitch Modulation LFO Low Frequency OscillatorKEY EQ/CHORUS Equalizer/ChorusEQ Edit Equalizer OFFChorus Edit Pitch Partial ParametersWave Waveform WG Form WG WaveformWG Form Waveform WG PW WG Pulse WidthValue -7-+7 LFO LFO Select Display LFO PhaseValue -7-+7 After Aftertouch Range KF Keyfollow pitch WG PitchCoars Pitch Coarse Value C1-C7 Fine Pitch FineWG Mod WG Modulation LFO LFO ModeENV P-ENV Mode Bend Bender ModeFreq Cutoff Frequency Bender Mode ExampleTVF Time Variant Filter Display Example Example Function Reso ResonanceKFKeyfollow Cutoff Point BP Bias PointTVF ENV TVF Envelope Value T5 Time TVF ENV TimeTVF ENV Level Display Example Function Example Value Volume AdjustmentTVA Time Variant Amplifier Value -50-+50 BP Bias PointVelo Velocity Follow Time TVA ENV EnvelopeTVA ENV Time TVA ENV Level Value -7-+7 MOD ModulationTVA MOD DEC Settings for the Entire VC-1How to Make the System Function Settings Digital Freq Digital Frequency Sound SettingMaster Tune Sound CharacterValue 1 SeparateCH Receive Channel in Separate ModeProg.C Program Change Switch Midi CH Midi ChannelTxEDIT Exclusive Exclusive SwitchBank.S Bank Select Switch DumpInitializing the System Settings Mono Mode, Poly Mode Key Mode AlterationSplit Key Mode Poly Mode Mono Mode Mode Message OffDual Dual-SSound List Preset PatchesP1 Preset 1Original D-50 P2 Preset 2 NewP4 Preset 4PN-D50-02 P3 Preset 3PN-D50-01BANK1 P5 Preset 5PN-D50-03P6 Preset 6PN-D50-04 Patch Factors Value Comment Patch FactorsParameter Value Tone ParametersCommon Parameters Parameter Value Comment Partial ParametersTVF ENV Midich System ParametersNumber Display PCM Name WaveformOneshot LoopNumber Display Loop Some of the sounds 1 to 76, are combined and loopedNewly Added Waveforms Data Transmission Midi ImplementationReceive data Mono Controller number Exclusive Communication Partial Parameter Common Parameter Patch Parameter Supplementary Material Midi Implementation Chart VC-1 V-Card D-50 SpecificationsIndex Index 100