Roland JV-1010 Changing a Performance, Press the Value knob and choose the Performance mode

Page 34

Changing Sounds from an External MIDI Device

Changing a Performance

When changing a performance, set the transmit channel of the external MIDI device and the Performance Control Channel (Perform Ctrl CH) of the JV-1010 to the same channel, then transmit the Bank Select and Program Change messages.

Now let’s set the transmit channel on the external MIDI device and the Performance Control Channel (Perform Ctrl CH) on the JV-1010 to the same channel and try changing the performance.

For more information about

the performance, please refer

to “Performing Multiple

Parts (Performance

Mode)” (p. 42).

fig.1-22

1

2

3

4

5

2,5 1,4 3

Press the VALUE knob and choose the Performance mode

(PERFORM).

Pressing the VALUE knob makes the mode change sequentially. Press the

knob several times until the PERFORM indicator lights up.

While holding down the VOLUME knob, press the VALUE knob.

Switch to the Edit mode.

Turn the CATEGORY/BANK knob to choose SYNTH/PAD (Perform Ctrl CH).

Turn the VALUE knob and choose the channel.

A value of from 001 to 016, or OFF flashes in the display.

While holding down the VOLUME knob, press the VALUE

knob.

When you first take the unit out of the box, the setting for the Performance Control Channel is at OFF.

The JV-1010 exits Edit mode.

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Page For the U.K Page Using the Unit Safely Power Supply Important NotesAdditional Precautions Important NotesQuick Start Contents Patch List SpecificationsAppendices Rhythm Set ListMain Features Incorporates the JV-1080 Sound ModuleFront and Rear Panel Computer Connector Midi Connectors IN, OUT, ThruComputer Switch Mac, PC-1, PC-2, Midi Front and Rear PanelQuick Start Getting Ready to Play Installing on the Rack-Mount AdaptorAttaching the Rubber Feet How to Install a Wave Expansion Board Installing a Wave Expansion BoardGetting Ready to Play Position the board holders so they are oriented 03a.eExpansion Board in place Use the tool supplied with the Wave Expansion Board toRotate the board holders to LOCK, securing the Wave Use the specified screws you removed in to reattachMaking the Connections Midi OUTUsing headphones the Phones jack Connecting audio equipment the Output jacks L MONO, RConnecting a Midi keyboard or sequencer the Midi connectors Using a computer the Computer connectorSwitching On the Power Switching the Power On and OffSwitching Off the Power Turn the CATEGORY/BANK knob to choose Piano Factory Reset Press the Value knobTurn the CATEGORY/BANK knob to choose Demo Press the Value knob or the Volume knobListening to Demo Songs Demo Play Turn the Value knob to choose the song you want to hearScott Wilkie Gundy Keller Composer ProfilesListening to Demo Songs Demo Play Hans-Joerg SchefflerChoosing and Playing Patches PRESET-D GM General MidiWAVE-EXP Wave Expansion Board installed in the slot SessionChoosing and Playing Patches Holding down the Volume knob, the sound for the currentlyAuditioning Patches Phrase Preview Selected patch is playedTurn the Part knob and choose Playing Notes from a Midi KeyboardFinger some keys on the Midi keyboard to play a few notes Choosing Patches Choosing Patches by BankTurn the CATEGORY/BANK knob to choose Piano Bright Piano by holding down the Volume knobChoosing Patches by Category Turn the Value knob to choosePlaying Percussion Sounds Your selection from the text displayed in white Set the transmit channel for the Midi keyboardTurn the CATEGORY/BANK knob and choose a bank. Make Turn the Value knob and choose a rhythm setSettings to an External Midi Device Data Transfer p Entering GM ModePress the Value knob to switch to the GM mode GM To Performing Multiple Parts PerformanceChanging Patches Set the transmit channel on the external Midi device toChanging Sounds from an External Midi Device Patch Bank Select Program Group NumberPress the Value knob and choose the Performance mode Changing a PerformanceUser PRESET-A PRESET-B Performance Bank Select Program Group NumberChanging a Rhythm Set Device to the JV-1010 refer to the following table Transmit a Program Change message from the external MidiRhythm Set Bank Select Program Group Number Trying Out Desktop Music Connecting to a ComputerConnecting to the Computer Connector Two Ways to ConnectFor Apple Macintosh Computers Trying Out Desktop MusicFor PCs Computer cable sold separately RSC-15ATComputer connector Connect the other end of the computer cable to the JV-1010’sConnecting with Midi Connectors Performing Multiple Parts Performance Mode PerformanceTurn the Value knob to choose patch Press the Value knob to choose the Performance modeFor Part Editing Using Only the JV-1010 Making Part Settings PartEditing Using Only the JV-1010 Restoring the Factory Settings Factory ResetMemory-Related Operations Utility Turn the CATEGORY/BANK knob to choose KEY&ORGAN Initializing GM Mode GM InitializeGM Initialize Initializing the Settings Initialize InitializeDtr flashes on the display Making System Settings System Selecting the Receive Channel Perform Ctrl CHTuning Master Tune Master TuneAppendices Troubleshooting Error Messages Patch List User User Group PR-A Preset a GroupNo. Name Voice Key Assign PR-B Preset B Group PR-C Preset C Group Patch ListPatch List PR-D GM Group PR-E Preset E Group Patch List XP-A Session Name VoicePiano Piano Group Patch Category ListKeyboard & Organ Group Patch Category List GUITAR/BASS Guitar/Bass Group Electric GuitarPatch Category List ORCH/BRASS Orchestra/Brass Group Soft Synth Lead Patch Category List SYNTH/PAD Synth/Pad GroupHard Synth Lead Techno Synth Pulsating Synth Synth FX Noise etcSYN Other Synth BPD Bright PAD SPD Soft PAD VOX VOX Poly Synth Bright Pad Synth Soft Pad Synth Vox, ChoirPatch Category List Ethnic Group Rhythm & Sound Effects GroupUser User PR-A Preset a Group PR-B Preset B Group Rhythm Set ListPR-C Preset C Group PR-D GM Group PR-E Preset E Group Rhythm Set ListXP-A Session 001 002 003 004 005 006 007 008 SessionSet Demo DrumName Key Mode User User Group PR-A Preset a Group PR-B Preset B GroupPerformance List Channel Voice Messages Midi ImplementationData Reception Polyphonic AftertouchMidi Implementation Channel Mode Messages System Realtime Messages System Exclusive MessagesData Request 1 RQ1 Data TransmissionData Transmission Data Set 1 DT1Identity Reply Message RPN MSB/LSB Controller number 100Data Set1 System Midi Implementation Parameter Address MapJV-1010 Model ID=6AH System CommonScale Tune Performance Performance CommonPatch Performance PartPatch Common Patch Tone INT, PCM, EXP Rhythm Common Rhythm SetupRhythm Note Address Block Map NO-SUS, Sustain OFF, CONTINUOUS, KEY-ONGS Model ID = 42H Supplementary Material Type19 TRIPLE-TAP-DELAY Type17 STEREO-DELAYType18 MODULATION-DELAY Type20 QUADRUPLE-TAP-DELAYType36 FLANGER→ Delay serial Type34 ENHANCER→ Delay serialType35 CHORUS→ Delay serial Type38 CHORUS/DELAY parallelExamples of Actual Midi Messages Examples of Exclusive Messages Calculating the ChecksumEqual Temperament Scale Tune Function Model ID 42H GS, address 40 1x 40HAscii Code Table Just Intonation tonic of CMidi Implementation Chart Specifications Computer Cable Wiring Diagrams Index PartIndex User UtilityAvis Information Page 01891601 ’02-2-AE2-61N

JV-1010 specifications

The Roland JV-1010 is a compact and versatile synthesizer and sound module that has made a significant impact on the music production landscape since its introduction in the mid-1990s. Renowned for its extensive sound library and superior sound quality, the JV-1010 stands as a go-to device for musicians looking for a powerful yet portable instrument.

One of the standout features of the JV-1010 is its expansive sound engine, which houses 1,024 patches and 36 voices of polyphony. This allows for complex musical layers without the risk of cutting off notes. The built-in digital effects processor comes with 40 types of effects, including reverb, chorus, and flanger, enabling users to further enhance their sounds and create unique tonal textures.

The sound generation technology behind the JV-1010 is based on the JV-1080 platform, leveraging Roland's acclaimed 'SR-JV80' expansion board technology. This modular approach allows users to expand their sonic capabilities by adding additional sound banks, providing access to a wide range of genres and instruments. Notably, the synthesizer includes sounds from various musical traditions, from orchestral to electronic, making it suitable for diverse musical styles.

Another key characteristic of the JV-1010 is its user-friendly interface. It features a clear LCD screen and organized button layout, making it easy for musicians to navigate through its extensive library. Additionally, the unit supports MIDI connectivity, allowing it to seamlessly integrate with other MIDI-compatible gear, such as keyboards, drum machines, and computers. This makes the JV-1010 an excellent choice for studios and live performance settings alike.

The compact size of the JV-1010, which allows it to easily fit into a standard rack mount or travel setup, adds to its appeal, especially for mobile musicians. The lightweight design does not compromise its durability, ensuring it can withstand the rigors of frequent transport.

Overall, the Roland JV-1010 synthesizer is a powerhouse of sound engineering, providing musicians with a rich palette of tones and textures. Its robust feature set, expansion capabilities, and portability make it a timeless instrument that continues to be appreciated by both seasoned professionals and emerging artists in the music industry. Whether used for studio production, live performance, or sound design, the JV-1010 remains a reliable choice for those seeking high-quality musical tools.
Top Page Image Contents