Roland JV-1010 owner manual Performance Bank Select Program Group Number, User PRESET-A PRESET-B

Changing Sounds from an External MIDI Device

6

7

8

9

Set the transmit channel on the external MIDI device to the same value that you selected for the Performance Control Channel (Perform Ctrl CH) in step 4.

For information on how to make the settings, refer to the owner’s manual

for the MIDI keyboard (the transmitting instrument).

Transmit a Bank Select MSB (Controller Number 0) value (refer to the following table) from the external MIDI device to the JV-1010.

Transmit a Bank Select LSB (Controller Number 32) value (refer to the following table) from the external MIDI device to the JV-1010.

Transmit a Program Change message from the external MIDI device to the JV-1010 (refer to the following table).

The correspondences between MIDI messages transmitted from external

MIDI devices and Performance Numbers are as shown below.

Performance	Performance	Bank Select		Program
Group	Number	MSB	LSB	Number
USER	1–32	80	0	1–32
PRESET-A	1–32	81	0	1–32
PRESET-B	1–32	81	1	1–32

When changing patches or rhythm sets in various parts of a performance, set the transmit channel of the external device and the receive channel of the part to the same channel. Note that when the Performance Control Channel and the receive channel for the part are the same, the setting for the Performance Control Channel takes priority, and the performance is switched.

Quick Start

35