Roland JV-1010 owner manual Initializing GM Mode GM Initialize

Editing Using Only the JV-1010

■Initializing GM Mode (GM Initialize)

Using a computer or sequencer connected to the JV-1010 to play music data bearing the GM logo requires the system be initialized for GM. Carrying out this initialization restores the basic GM settings.

fig.1-32

2 1,4,5 3

1	Press the VALUE knob to switch to the GM mode (GM).
	Pressing the VALUE knob makes the mode change sequentially. Press the
	knob several times, until the GM indicator lights up.
2	While holding down the VOLUME knob, press the VALUE
	knob.
	Switch to the Edit mode.
3	Turn the CATEGORY/BANK knob to choose KEY&ORGAN
	(GM Initialize).
	Gin flashes on the display.
4	Press the VALUE knob.
	Sur flashes in the display; this is a prompt for you to confirm whether or not
	you want to execute GM Initialize.

fig.Sur(GM)

5 Press the VALUE knob.

GM Initialize is executed, and the JV-1010 exits Edit mode.

The GM Initialize operation affects only GM mode data; no data stored in the user memory is initialized. If you want to restore all settings to their factory values, carry out Factory Reset (p. 21).

When in the Patch mode, you can’t enter the Edit mode.

To exit Edit mode without executing GM Initialize, carry out the operation described in Step 2.

46