Pioneer VSX-90TXV Connecting digital audio sources, About Hdmi, CD-R, MD, DAT, etc

Page 16

03Connecting your equipment

3To hear audio from your HDMI component through this system, make analog and/or digital connections as necessary.

On the rear panel, you must connect to the audio jacks from a set of audio/video inputs (for example, DVR/VCR1 or DVR/VCR2 as shown in the illustration).

•Without this connection, HDMI audio will still be output from your TV or plasma display (though no sound will be heard from this receiver).

4Assign the HDMI input(s) you connected to the corresponding input source.

If the connected HDMI component is different from the default settings for the HDMI input terminals of this receiver, you need to change the settings specified in Assigning the HDMI inputs on page 56.

5Use the input source buttons to select the input source you assigned in the previous step, then press SIGNAL SEL to select the audio input signal.

You can also use the front panel controls to do this (see Choosing the input signal on page 30).

•If the video signal does not appear on your TV or plasma display, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use an (analog) S-video or composite connection.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio. HDMI features include uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV signals), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Connecting digital audio sources

This receiver has both digital inputs and outputs, allowing you to connect digital audio components for playback and for making digital recordings.

Most digital components also have analog connections. See Connecting analog audio sources on the following page if you want to connect these too.

VSX-90TXV

 

OPTICAL

MULTI-ZONE & SOURCE ZONE 2

ANTENNA

 

DIGITAL

OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

 

 

 

 

 

 

IN

 

 

 

 

 

 

AM L

1

 

COMPONENT

 

 

 

 

 

 

 

L

(DVD/LD)

IN 1

Y

PB

PR

Y

PB

 

(DVR/

PR

 

IN

 

 

 

 

OUT

 

VCR1)

1

 

 

 

 

 

IN

 

IN 2

 

 

 

 

 

 

 

 

 

(TV/SAT)

 

 

 

 

 

 

 

 

 

2

IN

 

 

 

 

 

 

IN

 

 

 

 

 

 

 

 

 

 

(TV/SAT)

 

 

2

 

 

 

 

 

 

3

 

 

 

IN 3

Y

PB

PR

Y

 

PB

PR

R

 

 

 

(CD)

 

 

ASSIGNABLE

1

3

 

 

 

 

ASSIGNABLE

 

 

 

 

 

 

 

 

 

 

1

3

 

S-VIDEO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL

iPod

 

IN

IN

 

OUT

IN

OUT

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUT

VIDEO

XM

IN

ININ

AUDIO IN

OUT

IN

IN

IN

OUT

IN

OUT

L

IN 1

(DVD/LD)

R

IN 2

(DVR/VCR2)

CD-R/TAPE/MD DVD/LD TV/SAT

DVR/VCR1

DVR/V

CD

COAXIAL

ASSIGNABLE

1 2

1

 

 

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

OPTICAL

COAXIAL

 

OPTICAL

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL OUT

 

 

DIGITAL IN

 

CD-R, MD, DAT, etc.

1Connect an optical-type1digital audio output on your digital component to the DIGITAL 3 (CD) input. Use an optical cable for the connection.

2For recording equipment, connect the optical-type DIGITAL output to a digital input on the recorder. Use an optical cable to connect to the DIGITAL OUT.2

Note

1• If your digital component only has a coaxial digital output, you can connect it to one of the coaxial inputs on this receiver using a coaxial cable. When you set up the receiver you’ll need to tell the receiver which input you connected the component to (see also The Input Assign menu on page 55).

•The digital outputs from other components can be connected to any spare digital audio inputs on this receiver. You can assign them when setting up the receiver (see also The Input Assign menu on page 55).

2In order to record some digital sources, you must make analog connections as explained in Connecting analog audio sources below.

16

En

Page 15 Page 17
Image 16
Page 15 Page 17
Contents VSX-90TXV Federal Communications Commission Declaration of Conformity Model NumberPhone Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Using other functions Other SettingsOther connections Controlling the rest of your systemBefore you start FeaturesBefore you start Chapter Installing the receiver When installing this unit, make sure to leave spaceBefore you start Checking what’s in the box VentilationAutomatically setting up for surround sound Auto Mcacc Minute guide02 5 minute guide Chapter Introduction to home theaterMinute guide Follow the instructions on-screenBetter sound using Phase Control Problems when using the Auto Mcacc Setup02 5 minute guide Playing a sourceConnecting your equipment Chapter Connecting your equipmentRear panel When making cable connections Connecting your equipmentAbout the video converter Connect using a stereo RCA/phono jack cable Use a coaxial cable designed for digital audio342 DVD playerUsing the component video jacks Connecting a DVD/HDD recorder, VCR and other video sourcesDVR, VCR, etc Use a three-way component video cable Connecting using HdmiOn an HDMI-compatible monitor.1 About Hdmi Connecting digital audio sourcesCD-R, MD, DAT, etc Connecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting your equipment Installing your speaker system Connecting the speakersBare wire connections Placing the speakersBanana plug connections 10 mm 3/8Connecting antennas THX speaker system setupConnecting external antennas Plugging in the receiverAC outlet Out before unpluggingControls and displays Chapter Controls and displaysFront panel Operating range of remote control unit Controls and displaysControls and displays Display Controls and displays Remote control RECEIVERInput Select SelectMulti OPE ShiftSOURCE ReceiverListening to your system Listening to your system ChapterListening in surround sound Auto playbackUsing the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your systemUsing Front Stage Surround Advance Setting the effect optionsPress EFFECT/CH SEL again to adjust other settings Setting What it does OptionsListening to your system Using Stream Direct Choosing the input signalUsing surround back channel processing Listening with Acoustic Calibration EQUsing the Virtual Surround Back mode Listening to your system Using Midnight and Loudness Using the Sound RetrieverUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Using the tuner ChapterSaving station presets Listening to the radioUsing the tuner Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Surround back speaker settingSystem Setup menu Manual Mcacc setupSelect ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Volume increases to the reference levelFine Speaker Distance Professional Acoustic Calibration EQSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manuallyFront Align Speaker Setting System Setup menu Manual speaker setupSelect ‘Manual SP Setup’ then press Enter Crossover Network Channel LevelTHX Speaker Setup THX Audio SettingSpeaker Distance Connecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterUsing XM Radio Connecting your XM Radio receiverWatching photos and video content Other connectionsUsing XM HD Surround Saving channel presetsListening to XM Radio Selecting channels and browsing by genreUsing Sirius Radio Connecting your Sirius Connect TunerUsing the XM Menu Listening to channel presetsUsing the Sirius Menu Press Sirius SHIFT+TV to switch to the Sirius inputSirius Menu provides additional Sirius Radio features Listening to Sirius RadioConnecting the multichannel analog inputs Speaker B setupSwitching the speaker system Selecting the multichannel analog inputsBi-amping your front speakers Bi-wiring your speakersConnect your speakers as shown below Other connections Connecting additional amplifiers Basic MULTI-ZONE setupMULTI-ZONE listening Making MULTI-ZONE connectionsSurround Back System MULTI-ZONE setup Using the MULTI-ZONE controlsMULTI-ZONE remote controls Switching components on and off using the 12 volt trigger Other connections Connecting an IR receiverRemote sensor on the front panel of this receiver.1 TV/SAT DVD playerAudio SR+ Dimmer Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Other Setup menuDynamic Range Control Setup Assigning the Hdmi inputsDual Mono Setup LFE Attenuator SetupSR+ Setup for Pioneer plasma displays Video Converter SetupMulti Zone Setup Volt Trigger setupUsing other functions Using other functions ChapterReducing the level of an analog signal Using the sleep timerUsing other functions Dimming the display Switching the speaker impedanceResetting the system Press System Setup to confirmControlling the rest of your system Select the button for the command you want to input Controlling the rest of your systemMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing multi operations Using System offControls for TVs Buttons Function ComponentsFunction Components MD/CD-R/ DVRDecide which component you want to use the remote sensor Troubleshooting PowerAdditional information Additional information ChapterSymptomRemedy Other audio problemsAdditional information Settings VideoDisplay Assign menu onSymptom Cause Action Remote controlIPod messages XM radio messages Sirius radio messagesAdditional information Surround sound formats DolbyAbout THX Windows MediaTM Audio 9 ProfessionalListening modes with different input signal formats Stereo 2 channel signal formatsStandard Auto SurroundMultichannel signal formats Input signal format StandardAdditional information Specifications Cleaning the unitOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-90TXV specifications

The Pioneer VSX-90TXV is a powerhouse of a receiver that caters to the most discerning audiophiles and home theater enthusiasts. With its robust build and an impressive array of features, this model stands out as a staple in the Pioneer lineup, making it a noteworthy option for anyone looking to enhance their audio experience.

One of the most significant features of the VSX-90TXV is its impressive multi-channel amplification. It offers a powerful output of 135 watts per channel at 8 ohms, ensuring that even the most demanding audio signals are handled with ease. This receiver supports a variety of configurations, including 7.1 channel surround sound, delivering an immersive audio environment that brings movies, music, and gaming to life.

The VSX-90TXV is equipped with advanced surround sound technologies. It supports Dolby TrueHD and DTS-HD Master Audio formats, providing lossless audio that retains the original quality of recordings. The inclusion of Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) allows users to optimize their speaker setup for any room, by analyzing and adjusting the acoustics to provide the best possible sound.

Connectivity is another strong suit of the VSX-90TXV. It features multiple HDMI inputs, allowing for a hassle-free connection to various devices. With support for 4K Ultra HD pass-through and HDR (High Dynamic Range), it ensures that users can enjoy high-quality video along with high-fidelity audio. Additionally, there are plenty of analog and digital inputs for versatility with other audio sources.

Another remarkable aspect of the VSX-90TXV is its compatibility with wireless technologies, including Bluetooth and Wi-Fi. This allows for effortless streaming from a variety of devices, making it simple to enjoy music from smartphones, tablets, and computers. Pioneer's proprietary FireConnect technology also facilitates multi-room audio, allowing music to be played throughout the home in different zones.

Design-wise, the receiver features a sleek, modern aesthetic that blends seamlessly into any home entertainment setup. The intuitive interface and remote control make navigation simple, ensuring that users can easily access all the receiver’s features.

In summary, the Pioneer VSX-90TXV combines powerful amplification, advanced surround sound technology, and versatile connectivity options, making it an ideal choice for anyone looking to elevate their home audio experience. Whether it’s for cinematic thrills or soulful music sessions, this receiver delivers on all fronts.
Top Page Image Contents