Pioneer VSX-90TXV Using other functions Chapter, Making an audio or a video recording

Page 59

Using other functions

10

Chapter 10:

Using other functions

Making an audio or a video recording

You can make an audio or a video recording from the built-in tuner, or from an audio or video source

connected to the receiver (such as a CD player or TV).1

Keep in mind you can’t make a digital recording from an analog source or vice-versa, so make sure the components you are recording to/from are hooked up in the same way (see Connecting your equipment on page 11 for more on connections).

Since the video converter is not available when making recordings (from the video OUT jacks) make sure to use the same type of video cable for connecting your recorder as you used to connect your video source (the one you want to record) to this receiver. For example, you must connect your recorder using S-video if your source has also been connected using S-video.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component's instruction manual if you’re unsure.

4Start recording, then start playback of the source component.

Reducing the level of an analog signal

The input attenuator lowers the input level of an analog signal when it’s too strong. You can use this if you find the that the OVER indicator is lights often, or you can

hear distortion in the sound.2

XM RADIO

SIRIUS

DVR 2

 

DVD

TV

DVR 1

TVCTRL

CD-R/TAPE

 

 

ZONE 2

CD

iPod

TUNER

RECEIVER

 

SLEEP

SBch

ANALOG

 

 

 

ATT

For more information about video connections, see Connecting a DVD/HDD recorder, VCR and other video sources on page 14.

RECEIVER

INPUT

SYSTEM OFF

SOURCE

 

SELECT

 

SR+

DIMMER

MIDNIGHT/

 

 

LOUDNESS

•Press RECEIVER then press ANALOG ATT to switch the input attenuator on or off.

Using the sleep timer

XM RADIO

SIRIUS

DVR 2

 

DVD

TV

DVR 1

TVCTRL

CD-R/TAPE

 

 

ZONE 2

CD

iPod

TUNER

RECEIVER

1 Select the source you want to record.

Use the input source buttons (or INPUT SELECT).

•If necessary, press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component (see Choosing the input signal on page 30 for more on this).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video, DVD etc.

3 Prepare the recorder.

Insert a blank tape, MD, video etc. into the recording device and set the recording levels.

The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.

XM RADIO

SIRIUS

DVR 2

 

DVD

TV

DVR 1

TVCTRL

CD-R/TAPE

 

 

ZONE 2

CD

iPod

TUNER

RECEIVER

 

SLEEP

SBch

ANALOG

 

 

 

ATT

 

SR+

DIMMER

MIDNIGHT/

 

 

 

LOUDNESS

•Press RECEIVER then press SLEEP repeatedly to set the sleep time.

 

30 min

 

60 min

 

 

 

 

Off

 

 

90 min

 

 

 

 

•You can check the remaining sleep time at any time by pressing SLEEP once. Pressing repeatedly will cycle through the sleep options again.3

Note

1• The receiver’s volume, DSP (the tone controls, for example), and surround effects have no effect on the recorded signal.

•Some digital sources are copy-protected, and can only be recorded in analog.

•Some video sources are copy-protected. These cannot be recorded.

2The attenuator isn’t available with digital sources.

3You can also switch off the sleep timer simply by switching off the receiver.

59

En

Page 58 Page 60
Image 59
Page 58 Page 60
Contents VSX-90TXV Keep in a Secure AREA. this is for Your Security Federal Communications Commission Declaration of ConformityModel Number PhoneImportant Safety Instructions Contents Controlling the rest of your system Using other functionsOther Settings Other connectionsBefore you start Chapter FeaturesBefore you start Ventilation Installing the receiverWhen installing this unit, make sure to leave space Before you start Checking what’s in the boxIntroduction to home theater Automatically setting up for surround sound Auto McaccMinute guide 02 5 minute guide ChapterFollow the instructions on-screen Minute guidePlaying a source Better sound using Phase ControlProblems when using the Auto Mcacc Setup 02 5 minute guideRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections DVD player Connect using a stereo RCA/phono jack cableUse a coaxial cable designed for digital audio 342DVR, VCR, etc Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks On an HDMI-compatible monitor.1 Connecting using HdmiUse a three-way component video cable CD-R, MD, DAT, etc Connecting digital audio sourcesAbout Hdmi Tape deck, etc Connecting analog audio sourcesConnecting a component to the front panel inputs About the WMA9 Pro decoderConnecting the speakers Connecting your equipment Installing your speaker system10 mm 3/8 Bare wire connectionsPlacing the speakers Banana plug connectionsTHX speaker system setup Connecting antennasOut before unplugging Connecting external antennasPlugging in the receiver AC outletFront panel Controls and displaysControls and displays Chapter Controls and displays Operating range of remote control unitControls and displays Display Select Controls and displays Remote controlRECEIVER Input SelectReceiver Multi OPEShift SOURCEAuto playback Listening to your systemListening to your system Chapter Listening in surround soundListening to your system Using the Home THX modesUsing the Advanced surround effects THX Games ModeSetting What it does Options Using Front Stage Surround AdvanceSetting the effect options Press EFFECT/CH SEL again to adjust other settingsListening with Acoustic Calibration EQ Listening to your system Using Stream DirectChoosing the input signal Using surround back channel processingUsing the Virtual Surround Back mode Press Tone to select the frequency you want to adjust Listening to your system Using Midnight and LoudnessUsing the Sound Retriever Using the tone controlsListening to the radio Using the tunerUsing the tuner Chapter Saving station presetsAbcdefghijklmnopqrstuvwxyz Using the tunerNaming station presets Listening to station presetsSurround back speaker setting System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu System Setup menuManual Mcacc setup Select ‘Manual MCACC’ from the System Setup menuProfessional Acoustic Calibration EQ Select ‘Fine SP Distance’ from the Manual Mcacc setup menuVolume increases to the reference level Fine Speaker DistanceCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallyFront Align Setting the Acoustic Calibration EQ manuallyChecking your Acoustic Calibration EQ settings Select ‘Manual SP Setup’ then press Enter System Setup menu Manual speaker setupSpeaker Setting Channel Level Crossover NetworkSpeaker Distance THX Audio SettingTHX Speaker Setup Other connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsOther connections Using XM RadioConnecting your XM Radio receiver Watching photos and video contentSelecting channels and browsing by genre Using XM HD SurroundSaving channel presets Listening to XM RadioListening to channel presets Using Sirius RadioConnecting your Sirius Connect Tuner Using the XM MenuListening to Sirius Radio Using the Sirius MenuPress Sirius SHIFT+TV to switch to the Sirius input Sirius Menu provides additional Sirius Radio featuresSelecting the multichannel analog inputs Connecting the multichannel analog inputsSpeaker B setup Switching the speaker systemConnect your speakers as shown below Bi-wiring your speakersBi-amping your front speakers Making MULTI-ZONE connections Other connections Connecting additional amplifiersBasic MULTI-ZONE setup MULTI-ZONE listeningMULTI-ZONE remote controls Using the MULTI-ZONE controlsSurround Back System MULTI-ZONE setup Remote sensor on the front panel of this receiver.1 Other connections Connecting an IR receiverSwitching components on and off using the 12 volt trigger Audio DVD playerTV/SAT SR+ Dimmer Assigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuAssigning the Hdmi inputs Other SettingsOther Setup menu Dynamic Range Control SetupVideo Converter Setup Dual Mono SetupLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysVolt Trigger setup Multi Zone SetupUsing the sleep timer Using other functionsUsing other functions Chapter Reducing the level of an analog signalPress System Setup to confirm Using other functions Dimming the displaySwitching the speaker impedance Resetting the systemControlling the rest of your system Programming a multi-operation or a shutdown sequence Select the button for the command you want to inputControlling the rest of your system Multi Operation and System OffButtons Function Components Using multi operationsUsing System off Controls for TVsMD/CD-R/ DVR Function ComponentsDecide which component you want to use the remote sensor Additional information Chapter TroubleshootingPower Additional informationAdditional information Other audio problemsSymptomRemedy Video SettingsAssign menu on DisplayIPod messages Remote controlSymptom Cause Action Sirius radio messages XM radio messagesDolby Additional information Surround sound formatsWindows MediaTM Audio 9 Professional About THXAuto Surround Listening modes with different input signal formatsStereo 2 channel signal formats StandardInput signal format Standard Multichannel signal formatsCleaning the unit Additional information SpecificationsDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX-90TXV specifications

The Pioneer VSX-90TXV is a powerhouse of a receiver that caters to the most discerning audiophiles and home theater enthusiasts. With its robust build and an impressive array of features, this model stands out as a staple in the Pioneer lineup, making it a noteworthy option for anyone looking to enhance their audio experience.

One of the most significant features of the VSX-90TXV is its impressive multi-channel amplification. It offers a powerful output of 135 watts per channel at 8 ohms, ensuring that even the most demanding audio signals are handled with ease. This receiver supports a variety of configurations, including 7.1 channel surround sound, delivering an immersive audio environment that brings movies, music, and gaming to life.

The VSX-90TXV is equipped with advanced surround sound technologies. It supports Dolby TrueHD and DTS-HD Master Audio formats, providing lossless audio that retains the original quality of recordings. The inclusion of Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) allows users to optimize their speaker setup for any room, by analyzing and adjusting the acoustics to provide the best possible sound.

Connectivity is another strong suit of the VSX-90TXV. It features multiple HDMI inputs, allowing for a hassle-free connection to various devices. With support for 4K Ultra HD pass-through and HDR (High Dynamic Range), it ensures that users can enjoy high-quality video along with high-fidelity audio. Additionally, there are plenty of analog and digital inputs for versatility with other audio sources.

Another remarkable aspect of the VSX-90TXV is its compatibility with wireless technologies, including Bluetooth and Wi-Fi. This allows for effortless streaming from a variety of devices, making it simple to enjoy music from smartphones, tablets, and computers. Pioneer's proprietary FireConnect technology also facilitates multi-room audio, allowing music to be played throughout the home in different zones.

Design-wise, the receiver features a sleek, modern aesthetic that blends seamlessly into any home entertainment setup. The intuitive interface and remote control make navigation simple, ensuring that users can easily access all the receiver’s features.

In summary, the Pioneer VSX-90TXV combines powerful amplification, advanced surround sound technology, and versatile connectivity options, making it an ideal choice for anyone looking to elevate their home audio experience. Whether it’s for cinematic thrills or soulful music sessions, this receiver delivers on all fronts.
Top Page Image Contents