Pioneer VSX-90TXV operating instructions Setting the Acoustic Calibration EQ automatically

Page 38

07The System Setup menu

Setting the Acoustic Calibration EQ automatically

When you perform the Auto MCACC setup as specified in Automatically setting up for surround sound (Auto MCACC) on page 8, the correction is automatically done with the time period already selected (when TYPE1 is selected for EQ TYPE, the calibration is set only for ALL CH ADJUST). In this setup, you can select any of the time periods for EQ correction.

For an optimal system calibration based on the direct sound coming from the speakers, we recommend using the 30~50ms setting.

3c.Advanced EQ Setup

TIME POSITION

30~50ms

1Select ‘Advanced EQ Setup’ from the Manual MCACC setup menu.

3.Manual MCACC

a.Fine Ch Level b.Fine SP Distance c.Advanced EQ Setup d.EQ Data Copy

e.EQ CUSTOM1 Adjust f .EQ CUSTOM2 Adjust g.EQ Data Check

:Return

•The Advanced EQ setup overwrites the settings already set for ALL CH ADJUST and/or FRONT ALIGN. To keep these settings intact, save the data in CUSTOM1/CUSTOM2 as specified in Copying your Acoustic Calibration EQ settings below.

•Make sure the supplied microphone is connected.

•See Problems when using the Auto MCACC Setup on page 10 for notes regarding high background noise levels and other possible interference.

2 Select ‘TYPE1’ or ‘TYPE2’.

ENTER : Start :Cancel

4Press ENTER, then the calibration starts automatically.

3c.Advanced EQ Setup

 

3c.Advanced EQ Setup

Set

microphone.

 

Please Wait... 20

Turn

on Subwoofer.

 

Caution!

 

 

 

 

 

 

Loud test tones

 

 

 

will be output.

 

:Cancel

 

:Cancel

5 Wait for the Advanced EQ Setup to finish.

3c.Advanced EQ Setup

 

 

 

3c.Advanced EQ Setup

 

Now Analyzing

 

 

 

Now

Analyzing

 

 

 

 

 

 

 

 

 

 

 

 

 

Environment Check

 

 

 

Surround

Analyzing

 

Ambient Noise

[

]

 

Delay Check

[

]

Microphone

[

]

 

Level Check

[

]

Speaker Level

[

]

 

Aco Cal

EQ Pro.

[

]

 

 

 

:Cancel

 

 

 

 

 

:Cancel

As the receiver outputs test tones, the frequency balance is adjusted automatically for the following settings:

3c.Advanced EQ Setup

 

3c.Advanced EQ Setup

EQ TYPE

 

 

 

EQ TYPE

 

 

TYPE1

 

 

TYPE2

ALL CH ADJUST

 

 

 

ALL CH ADJUST

 

 

 

 

 

 

FRONT ALIGN

 

 

ENTER : Start

:Cancel

 

ENTER : Start

:Cancel

Use / to select the setting.

When TYPE1 is selected, the calibration is set for ALL CH ADJUST; when TYPE2 is selected, the calibration is set for both ALL CH ADJUST and FRONT ALIGN.

3 Select the time setting you want to use for calibration.1

You can choose the time period that will be used for the calibration. Use / to select the time setting.

Select the setting from the following time periods (in milliseconds): 0~20ms, 10~30ms, 20~40ms, 30~50ms, 40~60ms, 50~70ms and 60~80ms. This setting will be applied to all channels during calibration.

•ALL CH ADJUST – A ‘flat’ setting where all the speakers are set individually so no special weighting is given to any one channel.

•FRONT ALIGN – All speakers are set in accordance with the front speaker settings (no equalization is applied to the front left and right channels).

It will take about 1 to 3 minutes for the calibration to finish.

The display returns to the Manual MCACC setup menu automatically after the Acoustic Calibration Equalization is set.

Copying your Acoustic Calibration EQ settings

If you want to manually adjust the Acoustic Calibration EQ (see Setting the Acoustic Calibration EQ manually below), we recommend copying the ALL CH ADJUST or the FRONT ALIGN settings from the Advanced EQ Setup above (or from Automatically setting up for surround sound (Auto MCACC) on page 8) to one of the custom settings. Instead of just a flat EQ curve, this will give you a reference point from which to start.

Note

1For multi-channel audio sources, the localization of the reproduced sound image and the sound linkage of the speakers depend on the direct sound including the early-reflected sound. In this setup, the earlier time settings (0~20ms, 10~30ms, etc.) implement calibration closer to the direct sound with less consideration of the reverb characteristics; the later time settings (60~80ms, 50~70ms, etc.) incorporate the reverberant sound. Select your favorite setting for the optimum results.

38

En

Page 37 Page 39
Image 38
Page 37 Page 39
Contents VSX-90TXV Phone Federal Communications Commission Declaration of ConformityModel Number Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Other connections Using other functionsOther Settings Controlling the rest of your systemBefore you start Chapter FeaturesBefore you start Before you start Checking what’s in the box Installing the receiverWhen installing this unit, make sure to leave space Ventilation02 5 minute guide Chapter Automatically setting up for surround sound Auto McaccMinute guide Introduction to home theaterMinute guide Follow the instructions on-screen02 5 minute guide Better sound using Phase ControlProblems when using the Auto Mcacc Setup Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections 342 Connect using a stereo RCA/phono jack cableUse a coaxial cable designed for digital audio DVD playerDVR, VCR, etc Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks On an HDMI-compatible monitor.1 Connecting using HdmiUse a three-way component video cable CD-R, MD, DAT, etc Connecting digital audio sourcesAbout Hdmi About the WMA9 Pro decoder Connecting analog audio sourcesConnecting a component to the front panel inputs Tape deck, etcConnecting your equipment Installing your speaker system Connecting the speakersBanana plug connections Bare wire connectionsPlacing the speakers 10 mm 3/8Connecting antennas THX speaker system setupAC outlet Connecting external antennasPlugging in the receiver Out before unpluggingFront panel Controls and displaysControls and displays Chapter Operating range of remote control unit Controls and displaysControls and displays Display Input Select Controls and displays Remote controlRECEIVER SelectSOURCE Multi OPEShift ReceiverListening in surround sound Listening to your systemListening to your system Chapter Auto playbackTHX Games Mode Using the Home THX modesUsing the Advanced surround effects Listening to your systemPress EFFECT/CH SEL again to adjust other settings Using Front Stage Surround AdvanceSetting the effect options Setting What it does OptionsUsing surround back channel processing Listening to your system Using Stream DirectChoosing the input signal Listening with Acoustic Calibration EQUsing the Virtual Surround Back mode Using the tone controls Listening to your system Using Midnight and LoudnessUsing the Sound Retriever Press Tone to select the frequency you want to adjustSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Surround back speaker settingSelect ‘Manual MCACC’ from the System Setup menu System Setup menuManual Mcacc setup Select ‘Fine Ch Level’ from the Manual Mcacc setup menuFine Speaker Distance Select ‘Fine SP Distance’ from the Manual Mcacc setup menuVolume increases to the reference level Professional Acoustic Calibration EQSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsFront Align Setting the Acoustic Calibration EQ manuallyChecking your Acoustic Calibration EQ settings Select ‘Manual SP Setup’ then press Enter System Setup menu Manual speaker setupSpeaker Setting Crossover Network Channel LevelSpeaker Distance THX Audio SettingTHX Speaker Setup Other connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterWatching photos and video content Using XM RadioConnecting your XM Radio receiver Other connectionsListening to XM Radio Using XM HD SurroundSaving channel presets Selecting channels and browsing by genreUsing the XM Menu Using Sirius RadioConnecting your Sirius Connect Tuner Listening to channel presetsSirius Menu provides additional Sirius Radio features Using the Sirius MenuPress Sirius SHIFT+TV to switch to the Sirius input Listening to Sirius RadioSwitching the speaker system Connecting the multichannel analog inputsSpeaker B setup Selecting the multichannel analog inputsConnect your speakers as shown below Bi-wiring your speakersBi-amping your front speakers MULTI-ZONE listening Other connections Connecting additional amplifiersBasic MULTI-ZONE setup Making MULTI-ZONE connectionsMULTI-ZONE remote controls Using the MULTI-ZONE controlsSurround Back System MULTI-ZONE setup Remote sensor on the front panel of this receiver.1 Other connections Connecting an IR receiverSwitching components on and off using the 12 volt trigger Audio DVD playerTV/SAT SR+ Dimmer Input Assign menu Other SettingsOther Settings Chapter Assigning the digital inputsDynamic Range Control Setup Other SettingsOther Setup menu Assigning the Hdmi inputsSR+ Setup for Pioneer plasma displays Dual Mono SetupLFE Attenuator Setup Video Converter SetupMulti Zone Setup Volt Trigger setupReducing the level of an analog signal Using other functionsUsing other functions Chapter Using the sleep timerResetting the system Using other functions Dimming the displaySwitching the speaker impedance Press System Setup to confirmControlling the rest of your system Multi Operation and System Off Select the button for the command you want to inputControlling the rest of your system Programming a multi-operation or a shutdown sequenceControls for TVs Using multi operationsUsing System off Buttons Function ComponentsFunction Components MD/CD-R/ DVRDecide which component you want to use the remote sensor Additional information TroubleshootingPower Additional information ChapterAdditional information Other audio problemsSymptomRemedy Settings VideoDisplay Assign menu onIPod messages Remote controlSymptom Cause Action XM radio messages Sirius radio messagesAdditional information Surround sound formats DolbyAbout THX Windows MediaTM Audio 9 ProfessionalStandard Listening modes with different input signal formatsStereo 2 channel signal formats Auto SurroundMultichannel signal formats Input signal format StandardAdditional information Specifications Cleaning the unitDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX-90TXV specifications

The Pioneer VSX-90TXV is a powerhouse of a receiver that caters to the most discerning audiophiles and home theater enthusiasts. With its robust build and an impressive array of features, this model stands out as a staple in the Pioneer lineup, making it a noteworthy option for anyone looking to enhance their audio experience.

One of the most significant features of the VSX-90TXV is its impressive multi-channel amplification. It offers a powerful output of 135 watts per channel at 8 ohms, ensuring that even the most demanding audio signals are handled with ease. This receiver supports a variety of configurations, including 7.1 channel surround sound, delivering an immersive audio environment that brings movies, music, and gaming to life.

The VSX-90TXV is equipped with advanced surround sound technologies. It supports Dolby TrueHD and DTS-HD Master Audio formats, providing lossless audio that retains the original quality of recordings. The inclusion of Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) allows users to optimize their speaker setup for any room, by analyzing and adjusting the acoustics to provide the best possible sound.

Connectivity is another strong suit of the VSX-90TXV. It features multiple HDMI inputs, allowing for a hassle-free connection to various devices. With support for 4K Ultra HD pass-through and HDR (High Dynamic Range), it ensures that users can enjoy high-quality video along with high-fidelity audio. Additionally, there are plenty of analog and digital inputs for versatility with other audio sources.

Another remarkable aspect of the VSX-90TXV is its compatibility with wireless technologies, including Bluetooth and Wi-Fi. This allows for effortless streaming from a variety of devices, making it simple to enjoy music from smartphones, tablets, and computers. Pioneer's proprietary FireConnect technology also facilitates multi-room audio, allowing music to be played throughout the home in different zones.

Design-wise, the receiver features a sleek, modern aesthetic that blends seamlessly into any home entertainment setup. The intuitive interface and remote control make navigation simple, ensuring that users can easily access all the receiver’s features.

In summary, the Pioneer VSX-90TXV combines powerful amplification, advanced surround sound technology, and versatile connectivity options, making it an ideal choice for anyone looking to elevate their home audio experience. Whether it’s for cinematic thrills or soulful music sessions, this receiver delivers on all fronts.
Top Page Image Contents