Pioneer VSX-90TXV Additional information, Other audio problems, SymptomRemedy

Page 67

Additional information

12

SymptomRemedy

No sound from surround back speakers.

•Check that the surround back speakers are set to LARGE or SMALL (see Speaker Setting on page 40).

•Make sure surround back processing is set to SBch ON (see Using surround back channel processing on page 30).

•If the source is Dolby Surround EX or DTS-ES with no flag to indicate 6.1 compatibility, then with surround back processing set to SBch Auto, there will be no sound from the surround back speakers. In this case, set to SBch ON (see Using surround back channel processing on page 30).

•If the source does not have 6.1 playback channels, make sure that surround back processing is set to SBch ON and a surround mode is selected (see Listening in surround sound on page 27).

•Check the speaker connections (see Connecting the speakers on page 18). If only one surround back speaker is connected, make sure it’s connected to the left channel speaker terminal.

No sound from subwoofer.

• Check that the subwoofer is connected properly, switched on and the volume turned up.

 

• If your subwoofer has a sleep function, make sure it is switched off.

 

• Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 40).

 

• The crossover frequency may be set too low; try setting it higher to match the characteristics of your other

 

speakers (see Speaker Setting on page 40)

 

• If there is very little low frequency information in the source material, change your speaker settings to

 

Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS (see Speaker Setting on page 40).

 

• Check the speaker level settings (see Channel Level on page 41).

No sound from one speaker.

•Check the speaker connection (see Connecting the speakers on page 18).

•Check the speaker level settings (see Channel Level on page 41).

•Check that the speaker hasn’t been set to NO (see Speaker Setting on page 40).

•The channel may not be recorded in the source. By using one of the advanced effect listening mode, you may be able to create the missing channel (see Listening in surround sound on page 27).

Sound is produced from analog

• Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 30).

components, but not from digital

• Make sure that the digital input is assigned correctly for the input jack the component is connected to

ones (DVD, LD, CD-ROM etc.).

(see The Input Assign menu on page 55).

 

• Check the digital output settings on the source component.

 

• If the source component has a digital volume control, make sure this is not turned down.

 

• Make sure that the multichannel analog inputs are not selected. Select any other input source.

 

 

No sound is output or a noise is

• Check that your DVD player is compatible with Dolby Digital/DTS discs.

output when Dolby Digital/DTS

• Check the digital output settings of your DVD player. Make sure that the DTS signal output is set to On.

software is played back.

• If the source component has a digital volume control, make sure this is not turned down.

 

 

No sound when using the System

• If sound is muted in the sub zone (ZONE 2), it will be restored after exiting the System Setup menu.

Setup or Status menu.

 

 

 

Other audio problems

Symptom

Remedy

Broadcast stations cannot be

For FM broadcasts

selected automatically, or there is

• Fully extend the FM wire antenna, adjust the position for best reception and secure to a wall, etc.

considerable noise in radio

• Use an outdoor antenna for better reception (see page 21).

broadcasts.

For AM broadcasts

 

• Adjust the position and direction of the AM antenna.

 

• Use an outdoor antenna for better reception (see page 21).

 

• Noise may be caused by interference from other equipment, such as a fluorescent light, motor, etc.

 

Switch off or move the other equipment, or move the AM antenna.

 

 

A multichannel DVD source

• Make sure that the multichannel analog inputs are selected (see Selecting the multichannel analog inputs

appears to be downmixed to 2

on page 48).

channels during playback.

 

Noise is output when scanning a • This is not a malfunction of the receiver. The scan function of your player alters the digital information,

DTS CD.

making it unreadable, resulting in noise being output. Lower the volume when scanning.

 

 

When playing a DTS format LD

• Make sure that the input signal type is set to DIGITAL (see Choosing the input signal on page 30).

there is audible noise on the

 

soundtrack.

 

 

 

67

En

Page 66 Page 68
Image 67
Page 66 Page 68
Contents VSX-90TXV Keep in a Secure AREA. this is for Your Security Federal Communications Commission Declaration of ConformityModel Number PhoneImportant Safety Instructions Contents Controlling the rest of your system Using other functionsOther Settings Other connectionsBefore you start FeaturesBefore you start Chapter Ventilation Installing the receiverWhen installing this unit, make sure to leave space Before you start Checking what’s in the boxIntroduction to home theater Automatically setting up for surround sound Auto McaccMinute guide 02 5 minute guide ChapterFollow the instructions on-screen Minute guidePlaying a source Better sound using Phase ControlProblems when using the Auto Mcacc Setup 02 5 minute guideConnecting your equipment Chapter Connecting your equipmentRear panel When making cable connections Connecting your equipmentAbout the video converter DVD player Connect using a stereo RCA/phono jack cableUse a coaxial cable designed for digital audio 342Using the component video jacks Connecting a DVD/HDD recorder, VCR and other video sourcesDVR, VCR, etc Use a three-way component video cable Connecting using HdmiOn an HDMI-compatible monitor.1 About Hdmi Connecting digital audio sourcesCD-R, MD, DAT, etc Tape deck, etc Connecting analog audio sourcesConnecting a component to the front panel inputs About the WMA9 Pro decoderConnecting the speakers Connecting your equipment Installing your speaker system10 mm 3/8 Bare wire connectionsPlacing the speakers Banana plug connectionsTHX speaker system setup Connecting antennasOut before unplugging Connecting external antennasPlugging in the receiver AC outletControls and displays Chapter Controls and displaysFront panel Controls and displays Operating range of remote control unitControls and displays Display Select Controls and displays Remote controlRECEIVER Input SelectReceiver Multi OPEShift SOURCEAuto playback Listening to your systemListening to your system Chapter Listening in surround soundListening to your system Using the Home THX modesUsing the Advanced surround effects THX Games ModeSetting What it does Options Using Front Stage Surround AdvanceSetting the effect options Press EFFECT/CH SEL again to adjust other settingsListening with Acoustic Calibration EQ Listening to your system Using Stream DirectChoosing the input signal Using surround back channel processingUsing the Virtual Surround Back mode Press Tone to select the frequency you want to adjust Listening to your system Using Midnight and LoudnessUsing the Sound Retriever Using the tone controlsListening to the radio Using the tunerUsing the tuner Chapter Saving station presetsAbcdefghijklmnopqrstuvwxyz Using the tunerNaming station presets Listening to station presetsSurround back speaker setting System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu System Setup menuManual Mcacc setup Select ‘Manual MCACC’ from the System Setup menuProfessional Acoustic Calibration EQ Select ‘Fine SP Distance’ from the Manual Mcacc setup menuVolume increases to the reference level Fine Speaker DistanceCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallyChecking your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manuallyFront Align Speaker Setting System Setup menu Manual speaker setupSelect ‘Manual SP Setup’ then press Enter Channel Level Crossover NetworkTHX Speaker Setup THX Audio SettingSpeaker Distance Other connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsOther connections Using XM RadioConnecting your XM Radio receiver Watching photos and video contentSelecting channels and browsing by genre Using XM HD SurroundSaving channel presets Listening to XM RadioListening to channel presets Using Sirius RadioConnecting your Sirius Connect Tuner Using the XM MenuListening to Sirius Radio Using the Sirius MenuPress Sirius SHIFT+TV to switch to the Sirius input Sirius Menu provides additional Sirius Radio featuresSelecting the multichannel analog inputs Connecting the multichannel analog inputsSpeaker B setup Switching the speaker systemBi-amping your front speakers Bi-wiring your speakersConnect your speakers as shown below Making MULTI-ZONE connections Other connections Connecting additional amplifiersBasic MULTI-ZONE setup MULTI-ZONE listeningSurround Back System MULTI-ZONE setup Using the MULTI-ZONE controlsMULTI-ZONE remote controls Switching components on and off using the 12 volt trigger Other connections Connecting an IR receiverRemote sensor on the front panel of this receiver.1 TV/SAT DVD playerAudio SR+ Dimmer Assigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuAssigning the Hdmi inputs Other SettingsOther Setup menu Dynamic Range Control SetupVideo Converter Setup Dual Mono SetupLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysVolt Trigger setup Multi Zone SetupUsing the sleep timer Using other functionsUsing other functions Chapter Reducing the level of an analog signalPress System Setup to confirm Using other functions Dimming the displaySwitching the speaker impedance Resetting the systemControlling the rest of your system Programming a multi-operation or a shutdown sequence Select the button for the command you want to inputControlling the rest of your system Multi Operation and System OffButtons Function Components Using multi operationsUsing System off Controls for TVsMD/CD-R/ DVR Function ComponentsDecide which component you want to use the remote sensor Additional information Chapter TroubleshootingPower Additional informationSymptomRemedy Other audio problemsAdditional information Video SettingsAssign menu on DisplaySymptom Cause Action Remote controlIPod messages Sirius radio messages XM radio messagesDolby Additional information Surround sound formatsWindows MediaTM Audio 9 Professional About THXAuto Surround Listening modes with different input signal formatsStereo 2 channel signal formats StandardInput signal format Standard Multichannel signal formatsCleaning the unit Additional information SpecificationsOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-90TXV specifications

The Pioneer VSX-90TXV is a powerhouse of a receiver that caters to the most discerning audiophiles and home theater enthusiasts. With its robust build and an impressive array of features, this model stands out as a staple in the Pioneer lineup, making it a noteworthy option for anyone looking to enhance their audio experience.

One of the most significant features of the VSX-90TXV is its impressive multi-channel amplification. It offers a powerful output of 135 watts per channel at 8 ohms, ensuring that even the most demanding audio signals are handled with ease. This receiver supports a variety of configurations, including 7.1 channel surround sound, delivering an immersive audio environment that brings movies, music, and gaming to life.

The VSX-90TXV is equipped with advanced surround sound technologies. It supports Dolby TrueHD and DTS-HD Master Audio formats, providing lossless audio that retains the original quality of recordings. The inclusion of Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) allows users to optimize their speaker setup for any room, by analyzing and adjusting the acoustics to provide the best possible sound.

Connectivity is another strong suit of the VSX-90TXV. It features multiple HDMI inputs, allowing for a hassle-free connection to various devices. With support for 4K Ultra HD pass-through and HDR (High Dynamic Range), it ensures that users can enjoy high-quality video along with high-fidelity audio. Additionally, there are plenty of analog and digital inputs for versatility with other audio sources.

Another remarkable aspect of the VSX-90TXV is its compatibility with wireless technologies, including Bluetooth and Wi-Fi. This allows for effortless streaming from a variety of devices, making it simple to enjoy music from smartphones, tablets, and computers. Pioneer's proprietary FireConnect technology also facilitates multi-room audio, allowing music to be played throughout the home in different zones.

Design-wise, the receiver features a sleek, modern aesthetic that blends seamlessly into any home entertainment setup. The intuitive interface and remote control make navigation simple, ensuring that users can easily access all the receiver’s features.

In summary, the Pioneer VSX-90TXV combines powerful amplification, advanced surround sound technology, and versatile connectivity options, making it an ideal choice for anyone looking to elevate their home audio experience. Whether it’s for cinematic thrills or soulful music sessions, this receiver delivers on all fronts.
Top Page Image Contents