Pioneer VSX-90TXV Plugging in the receiver, AC outlet, Connecting external antennas

Page 21

Connecting your equipment

03

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75 Ω terminal.

75 Ω coaxial cable

ANTENNA

FM UNBAL 75 Ω

AM LOOP

To improve AM reception, connect a 5 m to 6 m (15 ft. to 18 ft.) length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

Caution

• Handle the power cord by the plug part. Do not pull

out the plug by tugging the cord, and never touch the

power cord when your hands are wet, as this could

cause a short circuit or electric shock. Do not place

the unit, a piece of furniture, or other object on the

power cord or pinch the cord in any other way. Never

make a knot in the cord or tie it with other cables. The

power cords should be routed so that they are not

likely to be stepped on. A damaged power cord can

cause a fire or give you an electric shock. Check the

power cord once in a while. If you find it damaged,

ask your nearest Pioneer authorized independent

service company for a replacement.

• The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular

use, e.g., when on vacation.

• Make sure the blue  STANDBY/ON light has gone

ANTENNA

FM UNBAL 75 Ω

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

5 m to 6 m

(15 ft. to 18 ft.)

AM LOOP

out before unplugging.

• Plug the power cord into a power outlet.

AC outlet

Power supplied through this outlet is turned on and off by the receiver’s power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit’s AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100 W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

21

En

Page 20 Page 22
Image 21
Page 20 Page 22
Contents VSX-90TXV Model Number Federal Communications Commission Declaration of ConformityPhone Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Other Settings Using other functionsOther connections Controlling the rest of your systemFeatures Before you startBefore you start Chapter When installing this unit, make sure to leave space Installing the receiverBefore you start Checking what’s in the box VentilationMinute guide Automatically setting up for surround sound Auto Mcacc02 5 minute guide Chapter Introduction to home theaterFollow the instructions on-screen Minute guideProblems when using the Auto Mcacc Setup Better sound using Phase Control02 5 minute guide Playing a sourceConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Use a coaxial cable designed for digital audio Connect using a stereo RCA/phono jack cable342 DVD playerConnecting a DVD/HDD recorder, VCR and other video sources Using the component video jacksDVR, VCR, etc Connecting using Hdmi Use a three-way component video cableOn an HDMI-compatible monitor.1 Connecting digital audio sources About HdmiCD-R, MD, DAT, etc Connecting a component to the front panel inputs Connecting analog audio sourcesAbout the WMA9 Pro decoder Tape deck, etcConnecting the speakers Connecting your equipment Installing your speaker systemPlacing the speakers Bare wire connectionsBanana plug connections 10 mm 3/8THX speaker system setup Connecting antennasPlugging in the receiver Connecting external antennasAC outlet Out before unpluggingControls and displays Controls and displays ChapterFront panel Controls and displays Operating range of remote control unitControls and displays Display RECEIVER Controls and displays Remote controlInput Select SelectShift Multi OPESOURCE ReceiverListening to your system Chapter Listening to your systemListening in surround sound Auto playbackUsing the Advanced surround effects Using the Home THX modesTHX Games Mode Listening to your systemSetting the effect options Using Front Stage Surround AdvancePress EFFECT/CH SEL again to adjust other settings Setting What it does OptionsChoosing the input signal Listening to your system Using Stream DirectUsing surround back channel processing Listening with Acoustic Calibration EQUsing the Virtual Surround Back mode Using the Sound Retriever Listening to your system Using Midnight and LoudnessUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Chapter Using the tunerSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Surround back speaker settingManual Mcacc setup System Setup menuSelect ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuVolume increases to the reference level Select ‘Fine SP Distance’ from the Manual Mcacc setup menuFine Speaker Distance Professional Acoustic Calibration EQCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallySetting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsFront Align System Setup menu Manual speaker setup Speaker SettingSelect ‘Manual SP Setup’ then press Enter Channel Level Crossover NetworkTHX Audio Setting THX Speaker SetupSpeaker Distance Connecting your iPod to the receiver Connecting an iPodOther connections Other connections ChapterConnecting your XM Radio receiver Using XM RadioWatching photos and video content Other connectionsSaving channel presets Using XM HD SurroundListening to XM Radio Selecting channels and browsing by genreConnecting your Sirius Connect Tuner Using Sirius RadioUsing the XM Menu Listening to channel presetsPress Sirius SHIFT+TV to switch to the Sirius input Using the Sirius MenuSirius Menu provides additional Sirius Radio features Listening to Sirius RadioSpeaker B setup Connecting the multichannel analog inputsSwitching the speaker system Selecting the multichannel analog inputsBi-wiring your speakers Bi-amping your front speakersConnect your speakers as shown below Basic MULTI-ZONE setup Other connections Connecting additional amplifiersMULTI-ZONE listening Making MULTI-ZONE connectionsUsing the MULTI-ZONE controls Surround Back System MULTI-ZONE setupMULTI-ZONE remote controls Other connections Connecting an IR receiver Switching components on and off using the 12 volt triggerRemote sensor on the front panel of this receiver.1 DVD player TV/SATAudio SR+ Dimmer Other Settings Chapter Other SettingsInput Assign menu Assigning the digital inputsOther Setup menu Other SettingsDynamic Range Control Setup Assigning the Hdmi inputsLFE Attenuator Setup Dual Mono SetupSR+ Setup for Pioneer plasma displays Video Converter SetupVolt Trigger setup Multi Zone SetupUsing other functions Chapter Using other functionsReducing the level of an analog signal Using the sleep timerSwitching the speaker impedance Using other functions Dimming the displayResetting the system Press System Setup to confirmControlling the rest of your system Controlling the rest of your system Select the button for the command you want to inputMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing System off Using multi operationsControls for TVs Buttons Function ComponentsMD/CD-R/ DVR Function ComponentsDecide which component you want to use the remote sensor Power TroubleshootingAdditional information Additional information ChapterOther audio problems SymptomRemedyAdditional information Video SettingsAssign menu on DisplayRemote control Symptom Cause ActionIPod messages Sirius radio messages XM radio messagesDolby Additional information Surround sound formatsWindows MediaTM Audio 9 Professional About THXStereo 2 channel signal formats Listening modes with different input signal formatsStandard Auto SurroundInput signal format Standard Multichannel signal formatsCleaning the unit Additional information SpecificationsTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-90TXV specifications

The Pioneer VSX-90TXV is a powerhouse of a receiver that caters to the most discerning audiophiles and home theater enthusiasts. With its robust build and an impressive array of features, this model stands out as a staple in the Pioneer lineup, making it a noteworthy option for anyone looking to enhance their audio experience.

One of the most significant features of the VSX-90TXV is its impressive multi-channel amplification. It offers a powerful output of 135 watts per channel at 8 ohms, ensuring that even the most demanding audio signals are handled with ease. This receiver supports a variety of configurations, including 7.1 channel surround sound, delivering an immersive audio environment that brings movies, music, and gaming to life.

The VSX-90TXV is equipped with advanced surround sound technologies. It supports Dolby TrueHD and DTS-HD Master Audio formats, providing lossless audio that retains the original quality of recordings. The inclusion of Pioneer's proprietary MCACC (Multi-Channel Acoustic Calibration System) allows users to optimize their speaker setup for any room, by analyzing and adjusting the acoustics to provide the best possible sound.

Connectivity is another strong suit of the VSX-90TXV. It features multiple HDMI inputs, allowing for a hassle-free connection to various devices. With support for 4K Ultra HD pass-through and HDR (High Dynamic Range), it ensures that users can enjoy high-quality video along with high-fidelity audio. Additionally, there are plenty of analog and digital inputs for versatility with other audio sources.

Another remarkable aspect of the VSX-90TXV is its compatibility with wireless technologies, including Bluetooth and Wi-Fi. This allows for effortless streaming from a variety of devices, making it simple to enjoy music from smartphones, tablets, and computers. Pioneer's proprietary FireConnect technology also facilitates multi-room audio, allowing music to be played throughout the home in different zones.

Design-wise, the receiver features a sleek, modern aesthetic that blends seamlessly into any home entertainment setup. The intuitive interface and remote control make navigation simple, ensuring that users can easily access all the receiver’s features.

In summary, the Pioneer VSX-90TXV combines powerful amplification, advanced surround sound technology, and versatile connectivity options, making it an ideal choice for anyone looking to elevate their home audio experience. Whether it’s for cinematic thrills or soulful music sessions, this receiver delivers on all fronts.
Top Page Image Contents