Surround sound settings, Using the Setup menu

Surround sound settings

Chapter 7 Surround sound settings

English

Using the Setup menu

From the Setup menu you can access all the surround

sound settings of the system1, including channel levels, speaker distances, dynamic range adjustment and dual mono audio playback.

Use the following buttons to use the Setup menu.

SLEEP

ENTER CLEAR

SETUP

TUNE

5Press ENTER when you’re finished.

•If you use the Auto MCACC feature again, it will overwrite the settings you have made here.

Speaker distance setting

The Auto MCACC feature (see page 18) should give you the best surround sound setup. However you may find that by further adjustment of the speaker distance settings you can improve the surround sound in your listening room.

Set the distance of each speaker from your normal listening position.

ST	ST
	ENTER
SOUND	TEST
SOUND	TONE
	TUNE
SOUND
RETRIEVER

SURROUND ADVANCED F.S.SURR MCACC

Channel level setting

The Auto MCACC feature (see page 18) should give you the best surround sound setup. However you may find that by further adjustment of the channel levels you can improve the surround sound in your listening room.

This method of setting the channel levels allows you to listen to a source and adjust the levels of each playback channel. Note that the channel level settings for stereo playback are independent of the settings for surround sound playback.

A further method of setting the channel levels is to use the test tone method. See Adjusting the channel levels using the test tone on page 26 for more on this.

1Select stereo or multichannel playback for a source.

2Press SETUP.

3	Use the	(cursor left/right) buttons to select
CH LEVEL, then press ENTER.
4	Use	(cursor left/right) to select a channel;

(cursor up/down) to adjust the level of that channel.

• You can adjust the level of each channel by ±10 dB.

1	Press SETUP.
2	Use the	(cursor left/right) buttons to select
DISTANCE, then press ENTER.
3	Use	(cursor left/right) to select a speaker;
	(cursor up/down) to adjust the distance.

Adjust the following speakers:

•L – Front left speaker

•C – Center speaker

•R – Front right speaker

•SR – Surround right speaker

•SL – Surround left speaker

•SW – Subwoofer

Each speaker can be adjusted from 1 FT to 30 FT.

4Press ENTER when you’re finished.

•If you use the Auto MCACC feature again, it will overwrite the settings you have made here.

Dynamic Range Control

When watching Dolby Digital or DTS material at low volume, low level sounds—including some of the dialog—can be difficult to hear properly. Using one of the Dynamic Range Control (DRC) settings can help by bringing up the low level sounds, while controlling high level peaks.

Dynamic Range Control works only with Dolby Digital soundtracks and some DTS soundtracks.

• If the system is in Stereo or Virtual mode, or a stereo	1	Press SETUP.
source is playing in Auto mode, you will not be able	2	Use the	(cursor left/right) buttons to select

to adjust the center or surround channels.	DRC, then press ENTER.

Note

1 There are other settings you can adjust from the Setup menu; these are explained in Listening to the radio on page 23 and Additional information on page 30.

SX-SW570, HTS-570 specifications

The Pioneer SX-SW570 and HTS-570 are two notable components within the audio equipment market, catering to those who seek enhanced sound performance in a compact form factor. The SX-SW570, a subwoofer, is specifically designed to provide deep, resonant bass, making it an ideal addition to an existing sound system. With its 10-inch bass driver, the subwoofer delivers powerful low-frequency effects that enhance the overall audio experience, whether for music, movies, or gaming.

One of the standout features of the SX-SW570 is its adjustable crossover frequency. This allows users to set the cutoff point for bass frequencies, ensuring seamless integration with other speakers in the setup. Additionally, the subwoofer’s phase switch helps in matching the timing of the woofer's sound with that of the main speakers, further enhancing audio coherence. The sleek design of the SX-SW570 also makes it easy to place within various living environments without compromising aesthetics.

On the other hand, the HTS-570 is a home theater system that combines several audio components into a cohesive package. Featuring a 5.1 channel configuration, it encompasses multiple satellite speakers and a center channel speaker that work harmoniously to deliver immersive surround sound. The system is equipped with advanced audio technologies, including Dolby Digital and DTS decoding, which enrich the audio output for movies and games, giving users an enveloping sound field.

The HTS-570 includes a powerful AV receiver with multiple HDMI inputs, allowing for easy connectivity to high-definition devices. This versatility enables users to enjoy their favorite media without hassle. The system also supports Bluetooth connectivity, empowering users to stream music directly from their smartphones or tablets.

Both the SX-SW570 and HTS-570 are designed with user-friendly operation in mind. Intuitive interfaces and remote controls allow for ease of use, ensuring that even those new to audio technology can achieve optimal sound settings.

In summary, with their impressive features, advanced technologies, and user-friendly designs, the Pioneer SX-SW570 and HTS-570 stand out as excellent choices for anyone looking to enhance their home audio experience. Whether it’s the exceptionally rich bass of the SX-SW570 or the full-range surround sound provided by the HTS-570, both products bring high-quality audio within reach of everyday consumers.