Additional information Troubleshooting, General

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

•If the system does not operate normally due to external effects such as static electricity disconnect the plug from the outlet and insert again to return to normal operating conditions.

•For audio-related problems, please also check the settings of the audio playback device. See the operating instructions for the device for detailed information.

General

Problem	Remedy
The power does not	• Leave the unit plugged in, wait for one minute, then switch back on.
turn on, or switches off	• Make sure there are no loose strands of wire touching the unit. This could cause the system to
suddenly (an error	shut off automatically.
message may be	• Check that the speakers are connected correctly.
displayed at startup).	• Make sure there is enough space for ventilation around the receiver subwoofer.
	• Make sure the voltage of the mains power source is correct for the model.
	• Try reducing the volume level.
	• If the problem persists, take it to your nearest Pioneer authorized service center or your dealer for
	servicing.

No sound is output	• If you’re using the line input, make sure the component is connected correctly (see Connecting
when an input function	auxiliary components on page 27).
is selected.	• Turn up the volume.
	• Press MUTE on the remote control to turn muting off.

No sound from	• Refer to Channel level setting on page 25 to check the speaker levels.
surround or center	• Check that you haven’t selected the AUTO, STEREO, or VIRTUAL mode (see Listening in surround
speakers.	sound on page 20).
	• Connect the speakers properly (refer to Connecting up).

Can’t operate using the	• Replace the batteries (Putting the batteries in the remote control on page 17).
remote control.	• Operate within 23 ft., 30° of the remote sensor (Using the remote control on page 17).
	• Remove any obstacles or operate from another position.
	• Avoid exposing the remote sensor on the front panel to direct light.
	• For operating the other Pioneer component connected to the CONTROL OUT jack of this receiver
	subwoofer, make sure that the control cable and coaxial cable or at least one set of analog audio
	cables are connected. (page 29)
	• If the receiver subwoofer is connected to a Pioneer plasma display with an SR+ cable, check that
	the plasma display is switched on. Point the remote control at the plasma display in order to operate
	the receiver subwoofer.
	• Check that nothing is mistakenly plugged into the CONTROL IN jack.

English

SX-SW570, HTS-570 specifications

The Pioneer SX-SW570 and HTS-570 are two notable components within the audio equipment market, catering to those who seek enhanced sound performance in a compact form factor. The SX-SW570, a subwoofer, is specifically designed to provide deep, resonant bass, making it an ideal addition to an existing sound system. With its 10-inch bass driver, the subwoofer delivers powerful low-frequency effects that enhance the overall audio experience, whether for music, movies, or gaming.

One of the standout features of the SX-SW570 is its adjustable crossover frequency. This allows users to set the cutoff point for bass frequencies, ensuring seamless integration with other speakers in the setup. Additionally, the subwoofer’s phase switch helps in matching the timing of the woofer's sound with that of the main speakers, further enhancing audio coherence. The sleek design of the SX-SW570 also makes it easy to place within various living environments without compromising aesthetics.

On the other hand, the HTS-570 is a home theater system that combines several audio components into a cohesive package. Featuring a 5.1 channel configuration, it encompasses multiple satellite speakers and a center channel speaker that work harmoniously to deliver immersive surround sound. The system is equipped with advanced audio technologies, including Dolby Digital and DTS decoding, which enrich the audio output for movies and games, giving users an enveloping sound field.

The HTS-570 includes a powerful AV receiver with multiple HDMI inputs, allowing for easy connectivity to high-definition devices. This versatility enables users to enjoy their favorite media without hassle. The system also supports Bluetooth connectivity, empowering users to stream music directly from their smartphones or tablets.

Both the SX-SW570 and HTS-570 are designed with user-friendly operation in mind. Intuitive interfaces and remote controls allow for ease of use, ensuring that even those new to audio technology can achieve optimal sound settings.

In summary, with their impressive features, advanced technologies, and user-friendly designs, the Pioneer SX-SW570 and HTS-570 stand out as excellent choices for anyone looking to enhance their home audio experience. Whether it’s the exceptionally rich bass of the SX-SW570 or the full-range surround sound provided by the HTS-570, both products bring high-quality audio within reach of everyday consumers.