Pioneer Complete Guide to Surround Sound Setup for Your Stereo System

Setting Up for Surround Sound

Check the Auto Settings

If you want to check what settings have been input for your surround sound parameters you can do it following the steps below.

SETUP

S0URCE	TV	SYSTEM RECEIVER
		OFF
DVD/LD	TV	SAT	TV CONT
MULTI CONTROL
VCR1/	VCR2	VIDEO	MULTI
DVR			OPERATION
CD	CD-R/	TUNER	RECEIVER
	TAPE1
DIMMER	INPUT ATT	LOUDNESS	SPEAKER A/B
1	2	3	4
VIDEO SEL	SIGNAL SEL	TAPE 2	EFFECT/CH SELL

1Use the 5∞ buttons to select CHECK and press ENTER.

2The first menu in which you can check your settings will appear. This is the speaker settings.

You can navigate this menu with the 2 3 buttons but we recommend you follow the steps below.

5	6	7	8		The order of the settings menus is: Speakers; Channel
TONE	BASS/TREBLE	– +10	+ DISC
9	0		ENTER		Delay; Channel Level; Acoustic Calibration.
SYSTEM SETUP		REMOTE SETUP
	DIRECT ACCESS DISP MODE
MENU				1~6
TUNER EDIT
	ENTER
STATUS	DTV ON/OFF		EXIT		3 To check the next settings select NEXT
MPX			RETURN
GUIDE					with the 5∞ buttons and press ENTER.
TUNING –	BAND	TUNING +
¶	8	EXTRA MENU

1 3 ¡

STATION –	DTV MENU CLASS	STATION +	If you want to leave the settings check select RETURN
4	7	¢	with the 5∞ buttons and press ENTER and go to step 6.
CHANNEL–		CHANNEL+

1 3.Surround Setup			4	Continue to move through the menus
				using the 5∞ buttons to select NEXT
				and pressing ENTER until you are done
[	Check	]
[ 1.Speaker Systems ]				checking the settings.
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal ]			5	To exit the check select RETURN with
[Return]

the 5∞ buttons and press ENTER .

You will return to the SURROUND SETUP menu.

6 To exit the SURROUND SETUP menu select RETURN with the 5∞ buttons and press ENTER. Then select EXIT with the 5∞ buttons and press ENTER.

42