Pioneer VSX-47TX manual Setting up the Direct Function, Component whose direct

Remote Control of Other Components

Setting up the DIRECT FUNCTION

The direct function will not be necessary for most users. It is designed in case you have an external video source connected to your TV (a video source that is not going through the VSX-47TX). For this explanation we'll call this the "external video deck." You'd like to control external video deck with this unit's remote control so you've assigned it a function button (for example purposes, the VCR 2 button). Yet, if you put the receiver in VCR 2 mode you'll get no picture on your TV because the external video deck signal is not going through the VSX-47TX. To get around this problem you set the DIRECT FUNCTION for VCR 2 to OFF. Now when you press VCR 2 function button you can control the external video deck with the remote but the receiver does not go into VCR 2 mode.

SETUP

	S0URCE	TV	SYSTEM RECEIVER
			OFF
3	DVD/LD	TV	SAT	TV CONT
	MULTI CONTROL
	VCR1/	VCR2	VIDEO	MULTI
	DVR			OPERATION
	CD	CD-R/	TUNER	RECEIVER
		TAPE1
	DIMMER	INPUT ATT	LOUDNESS	SPEAKER A/B
	1	2	3	4
	VIDEO SEL	SIGNAL SEL	TAPE 2	EFFECT/CH SELL

1Press the REMOTE SETUP button for

three seconds.

The REMOTE SETUP menu appears on the remote display.

2Use the 5∞ buttons to select

DIRCTFNC and press ENTER.

SELECT FUNCTION will flash in the remote control display.

5 6 7 8

TONE BASS/TREBLE – +10 + DISC

90 ENTER

		DIRECT ACCESS DISP MODE		1,6	3 Press the MULTI CONTROL button of
	SYSTEM SETUP		REMOTE SETUP
2,4	TUNER EDIT	ENTER
	MENU				the component whose direct
	GUIDE		RETURN
	STATUS		EXIT
	MPX	DTV ON/OFF			function you want to turn on or off.
	¶	8	EXTRA MENU
	TUNING –	BAND	TUNING +

1 3 ¡

STATION –	DTV MENU CLASS			STATION +
4		7		¢
CHANNEL–				CHANNEL+
	TV INPUT		INPUT
	TV CONTROL
TV VOL			MIDNIGHT	VOLUME
	TV CH
			DIGITAL
			NR
THX	STANDARD		STEREO	MUTE
			/DIRECT
SURROUND		LISTENING
ADVANCED	ADVANCED		MODE
CINEMA	CONCERT
	(DVD-A/SACD)
ACOUSTIC	MULTI CH		LISTENING	LIGHT
CAL	INPUT		CH SELECT

Î

AV PRE-PROGRAMMED AND LEARNING

REMOTE CONTROL UNIT

AXD7290

DIRECTFUNC appears on the remote control display.

4Use the 5∞ buttons to select ON,

OFF, or EXIT and press ENTER.

ON: The direct function is on.

OFF: The direct function is off.

EXIT: Leaves the DIRECT FUNCTION settings and returns you to the REMOTE SETUP menu.

After you press ENTER, if you chose one of the first two settings, COMPLETE will appear in the display.

memo • To exit from the remote control setup mode at any time, press

REMOTE SETUP.

•The default setting for all DIRECT FUNCTIONs is ON.

5Repeat steps 2-4 to set the direct function for as many components as you want.

6Press the REMOTE SETUP button to return to the previous mode.

68