Pioneer VSX1017TXV manual Controlling the rest of your system, Multi Operation and System Off

11Controlling the rest of your system

When direct function is on, any component you select (using the input source buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without

affecting the receiver.1

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

2 Use to select DIRECT F then press ENTER.

The LCD on the remote prompts you for the button of the input source you want to control.

3Press the input source button for the component you want to control then press ENTER.

4 Use	to switch direct function ON or OFF then
press ENTER.
The LCD shows OK to confirm the setting.

Multi Operation and System Off

The Multi Operation feature allows you to program a series of up to five commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.

Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components

in your system at the same time.2

Programming a multi-operation or a shutdown sequence

4	Use	to select CODE EDT then press ENTER.
To erase any previously stored multi-operations (or
shutdown sequences) select CODE ERS above.
5	Use	to select a command in the sequence then

press ENTER.

If this is the first command in the sequence, select 1ST CODE. Otherwise, simply choose the next command in the sequence. PRES KEY flashes after you press ENTER.

6If necessary, press the input source button for the component whose command you want to input.

This is only necessary if the command is for a new component (input source).

7Select the button for the command you want to input.

The following remote control commands can be selected:

RECEIVER	INPUT		SYSTEM OFF
			SOURCE
	SELECT
					TV CONTROL
				TVVOL	INPUT	TVCH		VOL
XM RADIO	SIRIUS	DVR 2			SELECT
DVD	TV	DVR 1	TVCTRL
CD-R/TAPE				ANT	REC	INFO
CD	iPod	TUNER	RECEIVER					MUTE
				MPX		REC STOP		JUKEBOX
	SLEEP	SBch	ANALOG
			ATT
	SR+	DIMMER	MIDNIGHT/	AUDIO	SUBTITLE	HDD		DVD
				DISP		CH		CH
			LOUDNESS
					PHOTO			STEREO/
				THX	STANDARD	ADV.SURR
	DIALOG E	PHASE	S.RETRIEVER					F.S.SURR
D.ACCESS +10			CLASS DISC	MULTI OPE	AUTOSURR	ACOUSTIC EQ		SIGNAL SEL
			ENTER
				SHIFT	EFFECT/CHSEL		LEVEL
TOPMENU			MENU
	TUNE
	ST	ST	T.EDIT
SETUP	ENTER		RETURN

TUNE

RECEIVER

GUIDE

BAND

XM RADIO	SIRIUS	DVR 2		TOPMENU		MENU
DVD	TV	DVR 1	TVCTRL		TUNE
CD-R/TAPE				ST	ST	T.EDIT
CD	iPod	TUNER	RECEIVER	SETUP	ENTER	RETURN
	SLEEP	SBch	ANALOG		TUNE
				GUIDE	BAND
			ATT

TV CONTROL

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

2 Use to select MULTI OP or SYS OFF from the menu and press ENTER.

If you selected Multi Operation (MULTI OP), the LCD on the remote prompts you for an input source button.

If you selected System Off (SYSOFF), go to step 4.

3Press the input source button for the component that will start the multi-operation then press ENTER. For example, if you want to start the sequence by switching on your DVD player, press DVD.

•You don’t need to program the receiver to switch on or off. This is done automatically.

With Pioneer components, you don’t need to:

•program the power to switch off in a shutdown sequence (except DVD recorders);

•program the power to switch on if it’s the source component selected in step 3;

•program a Pioneer TV or monitor to switch on if the input function (selected in step 2) has video input terminals;

These take priority in multi operations (not shutdown).

Note

1You can’t use direct function with the TV CTRL function.

2• Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the remote to control other components on page 57 for more on this).

•Some units may take some time to power up, in which case multiple operations may not be possible.

•Power on and off commands only work with components that have a standby mode.

58

En