Pioneer VSX1017TXV manual Additional information Chapter, Troubleshooting, Power, No sound

Page 62

12Additional information

Chapter 12:

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.

Power

Symptom

Remedy

The power does not turn on.

• Make sure that the power cable is plugged in to an active power outlet.

 

• Try disconnecting from the power outlet, then plugging back in.

 

 

The receiver suddenly switches

• Check that there are no loose strands of speaker wire touching the rear panel or another set of wires. If

off or the Phase Control indicator

so, re-attach the speaker wires, making sure there are no stray strands.

blinks.

• The receiver may have a serious problem. Disconnect from the power and call a Pioneer authorized

 

independent service company.

 

 

During loud playback the power

• Turn down the volume.

suddenly switches off.

• Lower the 40 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 36.

 

• Try switching on the digital safety feature (put the receiver into standby, hold down the SYSTEM SETUP

 

button on the front panel and press STANDBY/ON to switch between SAFETY ON and SAFETY OFF). If

 

the power switches off even with SAFETY ON selected, turn down the volume.

 

 

The unit does not respond when

• Try switching the receiver off then back on again.

the buttons are pressed.

• Try disconnecting the power cable, then connect again.

 

 

AMP ERR blinks in the display,

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

then the power automatically

authorized independent service company for help.

switches off. The MCACC blinks

 

and the power does not turn on.

 

OVERHEAT blinks in the display then the power automatically switches off.

•Allow the unit to cool down in a well-ventilated place before switching back on. Check the safety precautions on pages 2 and 3 for information on improving heat dispersal.

No sound

Symptom

Remedy

No sound is output when an input

• Check the volume, mute setting (press MUTE) and speaker setting (press SPEAKERS).

source is selected.

• Make sure the correct input source is selected.

No sound output from the front

• Check that the MCACC setup microphone is disconnected.

speakers.

• Make sure the correct input signal is selected (press SIGNAL SELECT).

 

• Check that the source component is connected properly (see Connecting your equipment on page 11).

 

• Check that the speakers are connected properly (see Connecting the speakers on page 18).

 

 

No sound from the surround or

• Check that the stereo mode or the Front Stage Surround Advance mode isn’t selected; select one of the

center speakers.

surround listening modes (see Listening in surround sound on page 27).

 

• Check that the surround/center speakers are not set to NO (see Speaker Setting on page 40).

 

• Check the channel level settings (see Channel Level on page 41).

 

• Check the speaker connections (see Connecting the speakers on page 18).

 

 

62

En

Page 61 Page 63
Image 62
Page 61 Page 63
Contents VSX-1017TXV-K Information to User Federal Communications Commission Declaration of ConformityKeep in a Secure AREA. this is for Your Security Important Safety Instructions Contents Other connections Using other functionsOther Settings Controlling the rest of your systemBefore you start Chapter FeaturesBefore you start Before you start Checking what’s in the box Installing the receiverWhen installing this unit, make sure to leave space Ventilation02 5 minute guide Chapter Automatically setting up for surround sound Auto McaccMinute guide Introduction to home theaterMinute guide Follow the instructions on-screen02 5 minute guide Better sound using Phase ControlProblems when using the Auto Mcacc Setup Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections 342 Connect using a stereo RCA/phono jack cableUse a coaxial cable designed for digital audio DVD playerUse an optical cable for the connection Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks If the device can output digital audio, connect anOn an HDMI-compatible monitor.1 Connecting using HdmiUse a three-way component video cable CD-R, MD, DAT, etc Connecting digital audio sourcesAbout Hdmi About the WMA9 Pro decoder Connecting a component to the front panel inputsConnecting analog audio sources Connecting your equipment Installing your speaker system Connecting the speakersBanana plug connections Bare wire connectionsPlacing the speakers 10 mm 3/8Connecting antennas THX speaker system setupAC outlet Connecting external antennasPlugging in the receiver Out before unpluggingFront panel Controls and displaysControls and displays Chapter Operating range of remote control unit Controls and displaysOver / ATT RtrvSound Dialog EInput Select Controls and displays Remote controlReceiver 6TUNE/ST /ENTERSource Multi OPEShift MuteListening in surround sound Listening to your systemListening to your system Chapter Auto playbackTHX Games Mode Using the Home THX modesUsing the Advanced surround effects Listening to your systemPress EFFECT/CH SEL again to adjust other settings Using Front Stage Surround AdvanceSetting the effect options Setting What it does OptionsUsing surround back channel processing Listening to your system Using Stream DirectChoosing the input signal Listening with Acoustic Calibration EQUsing the Virtual Surround Back mode Using the tone controls Listening to your system Using Midnight and LoudnessUsing the Sound Retriever Press Tone to select the frequency you want to adjustSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioListening to station presets Using the tunerNaming station presets AbcdefghijklmnopqrstuvwxyzMaking receiver settings from the System Setup menu System Setup menuSystem Setup menu Chapter Surround back speaker settingSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu System Setup menu Manual Mcacc setupSelect ‘Manual MCACC’ from the System Setup menu Fine Channel LevelFine Speaker Distance System Setup menuSelect ‘Fine SP Distance’ from the Manual Mcacc setup menu Professional Acoustic Calibration EQSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsFront Align Setting the Acoustic Calibration EQ manuallyChecking your Acoustic Calibration EQ settings Select ‘Manual SP Setup’ then press Enter System Setup menu Manual speaker setupSpeaker Setting Crossover Network Channel LevelSpeaker Distance THX Audio SettingTHX Speaker Setup Other connections Connecting an iPodConnecting your iPod to the receiver Other connections ChapterWatching photos and video content Using XM RadioConnecting your XM Radio receiver Other connectionsListening to XM Radio Using XM HD SurroundSaving channel presets Selecting channels and browsing by genreUsing the XM Menu Using Sirius RadioConnecting your Sirius Connect Tuner Listening to channel presetsListening to Sirius Radio Using the Sirius MenuPress Sirius SHIFT+TV to switch to the Sirius input Press Class to select one of the three classes thenSwitching the speaker system Connecting the multichannel analog inputsSpeaker B setup Selecting the multichannel analog inputsConnect your speakers as shown below Bi-wiring your speakersBi-amping your front speakers Pioneer plasma Other connections Connecting additional amplifiersUsing this receiver with a Pioneer plasma display DisplaySatellite receiver, etc Using the SR+ mode with a Pioneer plasma displayDVD player DVD/LDInput Assign menu Other SettingsOther Settings Chapter Assigning the digital inputsDynamic Range Control Setup Other SettingsOther Setup menu Dual Mono SetupVideo Converter Setup LFE Attenuator SetupSR+ Setup for Pioneer plasma displays Reducing the level of an analog signal Using other functionsUsing other functions Chapter Using the sleep timerResetting the system Using other functions Dimming the displaySwitching the speaker impedance Display shows RESET?Controlling the rest of your system Controlling the rest of your system LCD shows OK to confirm the settingSelect the button for the command you want to input Multi Operation and System OffControls for TVs Using multi operationsUsing System off Buttons Function Components+ CH Function ComponentsCH + + CH+Decide which component you want to use the remote sensor OUTAdditional information TroubleshootingPower Additional information ChapterAdditional information Other audio problemsSymptomRemedy Video SettingsPhase Control feature Display 96 kHzError Remote controlSymptom Cause Action IPod messagesXM radio messages Sirius radio messagesAdditional information Surround sound formats DolbyAbout THX Windows MediaTM Audio 9 ProfessionalInput signal format Standard Listening modes with different input signal formatsStereo 2 channel signal formats Auto SurroundMultichannel signal formats Additional information Specifications Cleaning the unitDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX1017TXV specifications

The Pioneer VSX-1017TXV is a versatile and powerful home theater receiver that caters to audiophiles and casual listeners alike. This 7.1-channel receiver is known for its ability to deliver immersive audio experiences, making it an excellent choice for anyone looking to enhance their home entertainment setup.

One of the main features of the VSX-1017TXV is its robust power output. With 100 watts per channel, it is equipped to drive a wide range of speakers while providing clear and dynamic sound. The receiver supports various surround sound formats, including Dolby Digital EX, DTS-ES, and Dolby Pro Logic IIx, allowing users to fully immerse themselves in the action of their favorite movies and games.

Another key characteristic of the Pioneer VSX-1017TXV is its advanced HDMI connectivity. With multiple HDMI inputs, the receiver can easily integrate with modern devices such as Blu-ray players, gaming consoles, and streaming devices. The unit supports high-definition audio formats like Dolby TrueHD and DTS-HD Master Audio, ensuring that users experience their media in the best possible quality.

The receiver also features Pioneer's MCACC (Multi-Channel Acoustic Calibration System) technology. This innovative system automatically analyzes the acoustics of the room and calibrates the audio output accordingly. As a result, users can enjoy optimal sound quality tailored to their specific listening environment without the need for extensive manual adjustments.

In addition to its audio capabilities, the VSX-1017TXV includes a variety of practical features for everyday use. The on-screen display simplifies navigation through menus and settings, while its remote control allows for easy operation from across the room. The receiver supports multi-zone functionality, enabling users to send audio to different areas of the house simultaneously.

With a sleek design that fits seamlessly into any home entertainment setup, the Pioneer VSX-1017TXV combines style with performance. Its solid build quality and user-friendly interface make it an ideal choice for those looking to elevate their home theater experience. Overall, the VSX-1017TXV stands out as a strong contender in the home audio market, delivering impressive sound and advanced features.
Top Page Image Contents