Pioneer VSX-1016TXV-K Speaker Distance, THX Speaker Setup, THX Audio Setting

Page 39

The System Setup menu

07

Speaker Distance

For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.

1Select ‘Speaker Distance’ from the Manual SP Setup menu.

4.Manual SP

Setup

 

4d.Speaker

Distance

 

a.Speaker

Setting

 

L

 

10.0ft (Reference)

 

b.Crossover Network

 

R

[

9.0ft ]

 

 

 

 

 

c.Channel

Level

 

C

 

 

 

 

 

 

 

 

 

9.5ft

 

d.Speaker

Distance

 

 

SL

[

6.0ft

]

 

 

 

 

 

e.THX Audio Setting

 

 

SR

[

6.5ft ]

 

 

 

 

 

f.THX Speaker Setup

 

SBL

[

6.0ft ]

 

 

 

 

 

 

 

 

 

SBR

[

6.5ft ]

 

 

 

 

 

 

 

 

 

SW

[ 12.5ft ]

 

 

 

 

 

 

:Return

 

:Finish

 

 

 

 

 

 

 

2 Adjust the distance of each speaker using

.

You can adjust the distance of each speaker in 0.5 foot increments.

•0–1 ft – Surround speakers within 1 foot apart (best for THX surround sound).

•1– 4 ft – Surround speakers between 1 and 4 feet apart.

•4 ft < – Surround speakers more than 4 feet apart.

3When you're finished, press RETURN.

You will return to the Manual SP Setup menu.

THX Speaker Setup

If you have a complete THX speaker system, you should make this setting for the most effective results when using surround sound. See THX speaker system setup on page 19 for more on using a THX speaker system.

1Select ‘THX Speaker Setup’ from the Manual SP Setup menu.

4.Manual SP Setup

3When you’re finished, press RETURN. You return to the Manual SP Setup menu.

Tip

•For best surround sound, make sure the surround back speakers are the same distance from the listening position.

THX Audio Setting

For the most effective results when using the THX Select2 Cinema and THX MusicMode listening modes (see Using the Home THX modes on page 27) with the Advanced Speaker Array (ASA) system (see About THX on page 63), it is required that you make the setting. See THX speaker system setup on page 19 for more on THX speaker

placement.1

1Select ‘THX Audio Setting’ from the Manual SP Setup menu.

4.Manual SP Setup

a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance e.THX Audio Setting f.THX Speaker Setup

:Return

2Specify the distance of your surround back speakers from each other.

4e.THX Audio Setting

SB SP Position

0-1 ft

SBL-SBR

:Finish

a.Speaker Setting b.Crossover Network c.Channel Level d.Speaker Distance e.THX Audio Setting f.THX Speaker Setup

:Return

2Specify whether or not you are using a THX speaker system.

4f.THX Speaker Setup

THX Speaker NO

If you are using THX speakers, select YES.

:Finish

•YES – All speaker settings are fixed to SMALL (see Speaker Setting on page 37) during the Auto MCACC setup.

•NO – Individual speaker sizes are determined according to the Auto MCACC setup.

3When you're finished, press RETURN.

You will return to the Manual SP Setup menu.

Note

1 If you don't have surround back speakers, or just have one, you won't be able to select this setting (Cannot select shows in the display).

39

En

Page 38 Page 40
Image 39
Page 38 Page 40
Contents VSX-1016TXV-K Information to User Federal Communications Declaration of ConformityModel Number VSX-1016TXV-K Responsible Party Name Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Additional information Other SettingsUsing other functions Other connectionsChecking what’s in the box FeaturesBefore you start Before you start ChapterInstalling the receiver Before you start VentilationLoading the batteries Introduction to home theater Automatically setting up for surround sound McaccMinute guide 02 5 minute guide ChapterMake sure ‘OK’ is selected, then press Enter Minute guidePlaying a source Better sound using Basic Phase ControlProblems when using the Auto Mcacc Setup 02 5 minute guideConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Connecting your equipment Connecting your TV and DVD player Connecting a satellite/cable receiver or other set-top boxDVD player DVR, VCR, etc Connecting a DVD/HDD recorder, VCR and other video sourcesUsing the component video jacks Use an optical cable for the connectionConnecting digital audio sources Use a three-way component video cableCD-R, MD, DAT, etc Tape deck, etc Connecting a component to the front panel inputsConnecting analog audio sources About the WMA9 Pro decoderConnecting the speakers Connecting your equipment Installing your speaker systemBare wire connections Placing the speakersBanana plug connections THX speaker system setup Connecting antennasAC outlet Connecting external antennasPlug the power cord into a power outlet Plugging in the receiverSTANDBY/ON Controls and displaysControls and displays Chapter Front panelControls and displays Operating range of remote control unitVideo Conv Controls and displays DisplaySleep Over / ATTSelect Controls and displays Remote controlReceiver Input SelectMute Multi OPEShift SourceStandard surround sound Listening to your systemListening to your system Chapter Auto playback Listening in surround soundListening to your system Using the Home THX modesUsing the Advanced surround effects Setting the effect optionsUse the +/- buttons to set it as necessary Press EFFECT/CH SEL again to adjust other settingsListening with Acoustic Calibration EQ Listening in stereoUsing the Virtual Surround Back mode Listening to your system Choosing the input signalPress Tone to select the frequency you want to adjust Using Midnight and LoudnessUsing the Sound Retriever Using the tone controlsListening to the radio Using the tunerUsing the tuner Chapter Saving station presetsAbcdefghijklmnopqrstuvwxyz Using the tunerNaming station presets Listening to station presetsSurround back speaker setting System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuFine Channel Level System Setup menu Manual Mcacc setupSelect ‘Manual MCACC’ from the System Setup menu Select ‘Fine Ch Level’ from the Manual Mcacc setup menuAcoustic Calibration EQ System Setup menuSetting the Acoustic Calibration EQ automatically Fine Speaker DistanceFront Align Copying your Acoustic Calibration EQ settingsSetting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsSpeaker Setting Manual speaker setupChannel Level Crossover NetworkTHX Speaker Setup THX Audio SettingSpeaker Distance Other connections Chapter Using XM RadioConnecting your XM Radio receiver Other connectionsOther connections Connecting using HdmiUsing XM HD Surround Saving channel presetsUse standard RCA/phono jack cables for the connections Second Zone speaker B setupAbout Hdmi Selecting the multichannel analog inputsConnect your speakers as shown below Switching the speaker system2nd Zone setting only.1 Bi-amping your front speakersOther connections Bi-wiring your speakers Using this receiver with a Pioneer plasma displayLarge Display Using the SR+ mode with a Pioneer plasma displayDVD player Pioneer plasmaAssigning the digital inputs Other SettingsOther Settings Chapter Input Assign menuAssigning the Hdmi inputs Other SettingsOther Setup menu Dynamic Range Control SetupVideo Converter Setup Dual Mono SetupLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysMaking an audio or a video recording Using other functionsUsing other functions Chapter Reducing the level of an analog signalDisplay shows RESET? Using other functions Using the sleep timerResetting the system Switching the speaker impedanceControlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Programming signals from other remote controlsControlling the rest of your system Erasing one of the remote control button settingsResetting the remote control presets Confirming preset codesProgramming a multi-operation or a shutdown sequence Use to switch direct function on or OFF then press EnterDirect function Multi Operation and System OffUsing System off Using multi operationsControls for other components Controlling the rest of your system Controls for TVsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorAdditional information Chapter TroubleshootingPower Additional informationAdditional information Other audio problemsVideo SettingsDisplay Remote controlXM radio messages HdmiAdditional information Surround sound formats DolbyWindows Media Audio 9 Professional About THX THX MusicMode Listening modes with different input signal formatsStereo 2 channel signal formats THX Games ModeAuto Multichannel signal formatsCleaning the unit Additional information SpecificationsTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-1016TXV-K specifications

The Pioneer VSX-1016TXV-K is a versatile and powerful A/V receiver that brings a wealth of features and technologies to enhance your home entertainment experience. Built with the audiophile in mind, it combines high-performance sound quality with modern connectivity and smart functionality.

One of the main features of the VSX-1016TXV-K is its robust amplification system, which delivers an impressive 7.1-channel surround sound experience. With a total output of 110 watts per channel, this receiver is capable of driving a variety of speakers, ensuring that every audio detail is crisp and immersive. This makes it an ideal choice for both movie watchers and music enthusiasts.

The receiver supports numerous audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing lossless audio quality for high-definition content. This commitment to audio excellence is complemented by its use of advanced technologies such as the Pioneer MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the receiver's settings based on the acoustics of your room, ensuring optimal sound performance.

In terms of connectivity, the VSX-1016TXV-K is equipped with multiple HDMI inputs, which support 1080p video pass-through and are compatible with the latest HDMI standards. This makes it easy to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, allowing seamless switching between sources. The unit also includes component and composite video inputs, as well as optical and coaxial digital audio inputs for greater flexibility.

Additionally, the receiver features an integrated AM/FM tuner, allowing listeners to enjoy their favorite radio stations. The user-friendly on-screen display and menu system enable easy navigation through different settings and offers access to a wide range of features, including preset equalizer settings and listening modes.

The VSX-1016TXV-K is designed with aesthetics in mind, featuring a sleek black finish that fits well in any home theater environment. Its robust build quality ensures durability while providing an attractive addition to your audio setup.

In conclusion, the Pioneer VSX-1016TXV-K A/V receiver stands out in the crowded market of home audio equipment with its exceptional sound performance, extensive connectivity options, and thoughtful user features. Whether you're hosting movie nights or enjoying your favorite music, this receiver delivers an impressive and engaging listening experience.
Top Page Image Contents