Pioneer VSX-1016TXV-K Using other functions Chapter, Making an audio or a video recording

Page 49

Using other functions

10

Chapter 10

Using other functions

Making an audio or a video recording

You can make an audio or a video recording from the built-in tuner, or from an audio or video source

connected to the receiver (such as a CD player or TV). 1

Keep in mind you can't make a digital recording from an analog source or vice-versa, so make sure the components you are recording to/from are hooked up in the same way (see Connecting your equipment on page 11 for more on connections).

Since the video converter is not available when making recordings (from the video OUT jacks) make sure to use the same type of video cable for connecting your recorder as you used to connect your video source (the one you want to record) to this receiver. For example, you must connect your recorder using S-video if your source has also been connected using S-video.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component's instruction manual if you're unsure.

4Start recording, then start playback of the source component.

Reducing the level of an analog signal

The input attenuator lowers the input level of an analog signal when it’s too strong. You can use this if you find the that the OVER indicator is lights often, or you can

hear distortion in the sound.2

 

 

DVR 2

 

DVD

TV

DVR1

TVCTRL

 

 

XM RADIO

 

CD

CD-R

TUNER

RECEIVER

 

SLEEP

SBch

ANALOG

 

 

 

ATT

For more information about video connections, see Connecting a DVD/HDD recorder, VCR and other video sources on page 14.

RECEIVER

INPUT

SYSTEM OFF

SOURCE

 

SELECT

 

SR+

DIMMER

MIDNIGHT/

 

 

LOUDNESS

•Press RECEIVER then press ANALOG ATT to switch the input attenuator on or off.

DVR 2

DVD TV DVR1 TVCTRL

XM RADIO

Watching video and audio sources independently

You can listen to a sound source and select a different video source on your TV.

CD

CD-R TUNER RECEIVER

 

 

 

 

 

 

 

 

1 Select the source you want to record.

Use the input source buttons (or INPUT SELECT).

•If necessary, press SIGNAL SEL (SIGNAL SELECT) to select the input signal corresponding to the source component (see Choosing the input signal on page 29 for more on this).

2 Prepare the source you want to record.

Tune to the radio station, load the CD, video, DVD etc.

3 Prepare the recorder.

Insert a blank tape, MD, video etc. into the recording device and set the recording levels.

•While listening to a source, press VIDEO SELECT (front panel) to select the video source you want to watch.

Press repeatedly to cycle through the possible video sources. You can select DVD, TV, DVR1, DVR2, VIDEO

or OFF (no video signal).3

Note

1• The receiver's volume, DSP (the tone controls, for example), and surround effects have no effect on the recorded signal.

•Some digital sources are copy-protected, and can only be recorded in analog.

•Some video sources are copy-protected. These cannot be recorded.

2The attenuator isn’t available with digital sources.

3• The video select feature is canceled if you change the source input or switch off the receiver.

•Note that this feature will not work with video sources assigned to either of the HDMI video inputs.

49

En

Page 48 Page 50
Image 49
Page 48 Page 50
Contents VSX-1016TXV-K Model Number VSX-1016TXV-K Responsible Party Name Federal Communications Declaration of ConformityKeep in a Secure AREA. this is for Your Security Information to UserImportant Safety Instructions Contents Using other functions Other SettingsOther connections Additional informationBefore you start FeaturesBefore you start Chapter Checking what’s in the boxBefore you start Ventilation Installing the receiverLoading the batteries Minute guide Automatically setting up for surround sound Mcacc02 5 minute guide Chapter Introduction to home theaterMake sure ‘OK’ is selected, then press Enter Minute guideProblems when using the Auto Mcacc Setup Better sound using Basic Phase Control02 5 minute guide Playing a sourceConnecting your equipment Chapter Connecting your equipmentRear panel When making cable connections Connecting your equipmentAbout the video converter Connecting a satellite/cable receiver or other set-top box Connecting your equipment Connecting your TV and DVD playerDVD player Using the component video jacks Connecting a DVD/HDD recorder, VCR and other video sourcesUse an optical cable for the connection DVR, VCR, etcUse a three-way component video cable Connecting digital audio sourcesCD-R, MD, DAT, etc Connecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting the speakers Connecting your equipment Installing your speaker systemPlacing the speakers Bare wire connectionsBanana plug connections THX speaker system setup Connecting antennasPlug the power cord into a power outlet Connecting external antennasPlugging in the receiver AC outletControls and displays Chapter Controls and displaysFront panel STANDBY/ONControls and displays Operating range of remote control unitSleep Controls and displays DisplayOver / ATT Video ConvReceiver Controls and displays Remote controlInput Select SelectShift Multi OPESource MuteListening to your system Chapter Listening to your systemAuto playback Listening in surround sound Standard surround soundUsing the Advanced surround effects Using the Home THX modesSetting the effect options Listening to your systemListening with Acoustic Calibration EQ Press EFFECT/CH SEL again to adjust other settingsListening in stereo Use the +/- buttons to set it as necessaryUsing the Virtual Surround Back mode Listening to your system Choosing the input signalUsing the Sound Retriever Using Midnight and LoudnessUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Chapter Using the tunerSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Surround back speaker settingSelect ‘Manual MCACC’ from the System Setup menu System Setup menu Manual Mcacc setupSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSetting the Acoustic Calibration EQ automatically System Setup menuFine Speaker Distance Acoustic Calibration EQSetting the Acoustic Calibration EQ manually Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Front AlignSpeaker Setting Manual speaker setupChannel Level Crossover NetworkTHX Audio Setting THX Speaker SetupSpeaker Distance Connecting your XM Radio receiver Using XM RadioOther connections Other connections ChapterUsing XM HD Surround Connecting using HdmiSaving channel presets Other connectionsAbout Hdmi Second Zone speaker B setupSelecting the multichannel analog inputs Use standard RCA/phono jack cables for the connections2nd Zone setting only.1 Switching the speaker systemBi-amping your front speakers Connect your speakers as shown belowUsing this receiver with a Pioneer plasma display Other connections Bi-wiring your speakersLarge DVD player Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayOther Settings Chapter Other SettingsInput Assign menu Assigning the digital inputsOther Setup menu Other SettingsDynamic Range Control Setup Assigning the Hdmi inputsLFE Attenuator Setup Dual Mono SetupSR+ Setup for Pioneer plasma displays Video Converter SetupUsing other functions Chapter Using other functionsReducing the level of an analog signal Making an audio or a video recordingResetting the system Using other functions Using the sleep timerSwitching the speaker impedance Display shows RESET?Selecting preset codes directly Setting the remote to control other componentsProgramming signals from other remote controls Controlling the rest of your systemResetting the remote control presets Erasing one of the remote control button settingsConfirming preset codes Controlling the rest of your systemDirect function Use to switch direct function on or OFF then press EnterMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing System off Using multi operationsControls for other components Controlling the rest of your system Controls for TVsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorPower TroubleshootingAdditional information Additional information ChapterAdditional information Other audio problemsVideo SettingsDisplay Remote controlXM radio messages HdmiDolby Additional information Surround sound formatsWindows Media Audio 9 Professional About THX Stereo 2 channel signal formats Listening modes with different input signal formatsTHX Games Mode THX MusicModeAuto Multichannel signal formatsCleaning the unit Additional information SpecificationsOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-1016TXV-K specifications

The Pioneer VSX-1016TXV-K is a versatile and powerful A/V receiver that brings a wealth of features and technologies to enhance your home entertainment experience. Built with the audiophile in mind, it combines high-performance sound quality with modern connectivity and smart functionality.

One of the main features of the VSX-1016TXV-K is its robust amplification system, which delivers an impressive 7.1-channel surround sound experience. With a total output of 110 watts per channel, this receiver is capable of driving a variety of speakers, ensuring that every audio detail is crisp and immersive. This makes it an ideal choice for both movie watchers and music enthusiasts.

The receiver supports numerous audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing lossless audio quality for high-definition content. This commitment to audio excellence is complemented by its use of advanced technologies such as the Pioneer MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the receiver's settings based on the acoustics of your room, ensuring optimal sound performance.

In terms of connectivity, the VSX-1016TXV-K is equipped with multiple HDMI inputs, which support 1080p video pass-through and are compatible with the latest HDMI standards. This makes it easy to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, allowing seamless switching between sources. The unit also includes component and composite video inputs, as well as optical and coaxial digital audio inputs for greater flexibility.

Additionally, the receiver features an integrated AM/FM tuner, allowing listeners to enjoy their favorite radio stations. The user-friendly on-screen display and menu system enable easy navigation through different settings and offers access to a wide range of features, including preset equalizer settings and listening modes.

The VSX-1016TXV-K is designed with aesthetics in mind, featuring a sleek black finish that fits well in any home theater environment. Its robust build quality ensures durability while providing an attractive addition to your audio setup.

In conclusion, the Pioneer VSX-1016TXV-K A/V receiver stands out in the crowded market of home audio equipment with its exceptional sound performance, extensive connectivity options, and thoughtful user features. Whether you're hosting movie nights or enjoying your favorite music, this receiver delivers an impressive and engaging listening experience.
Top Page Image Contents