Pioneer VSX-1016TXV-K operating instructions Direct function, Multi Operation and System Off

Page 53

Controlling the rest of your system

3Press the button of the component for which you want to check the preset code, then press ENTER.

The brand name and preset code appears in the display for three seconds.

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

11

Multi Operation and System Off

The Multi Operation feature allows you to program a series of up to 5 commands for the components in your system. For example, you could turn on your TV, turn on your DVD player and start playing the loaded DVD using only two buttons on the remote control.

Similar to multi operations, System Off allows you to use one button to stop and switch off a series of components

in your system at the same time.2

Programming a multi-operation or a shutdown sequence

 

 

DVR 2

TOPMENU

MENU

DVD

TV

DVR1

TVCTRL

TUNE

When direct function is on, any component you select (using the input source buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without

affecting the receiver.1

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

 

 

XM RADIO

 

DTVMENU ST

ST

T.EDIT

CD

CD-R

TUNER

RECEIVER

 

ENTER

 

RETURN

SETUP

 

 

SLEEP

SBch

ANALOG

GUIDE

CATEGORY TUNE

BAND

 

 

 

ATT

 

 

 

TV CONTROL

1While pressing the RECEIVER button, press SETUP. The remote LCD display shows SETUP.

2 Use to select MULTI OP or SYS OFF from the menu and press ENTER.

2 Use to select DIRECT F then press ENTER.

The LCD on the remote prompts you for the button of the input source you want to control.

3Press the input source button for the component you want to control then press ENTER.

4 Use to switch direct function ON or OFF then press ENTER.

The LCD shows OK to confirm the setting.

If you selected Multi Operation (MULTI OP), the LCD on the remote prompts you for an input source button.

If you selected System Off (SYSOFF), go to step 4.

3Press the input source button for the component that will start the multi-operation then press ENTER. For example, if you want to start the sequence by switching on your DVD player, press DVD.

4 Use to select CODE EDT then press ENTER.

To erase any previously stored multi-operations (or shutdown sequences) select CODE ERS above.

5 Use

to select a command in the sequence then

press ENTER.

 

If this is the first command in the sequence, select 1ST CODE. Otherwise, simply choose the next command in the sequence. PRES KEY flashes after you press ENTER.

6If necessary, press the input source button for the component whose command you want to input.

This is only necessary if the command is for a new component (input source).

Note

1You can’t use direct function with the TV CTRL function.

2• Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see Setting the remote to control other components on page 51 for more on this).

•Some units may take some time to power up, in which case multiple operations may not be possible.

•Power on and off commands only work with components that have a standby mode.

53

En

Page 52 Page 54
Image 53
Page 52 Page 54
Contents VSX-1016TXV-K Model Number VSX-1016TXV-K Responsible Party Name Federal Communications Declaration of ConformityKeep in a Secure AREA. this is for Your Security Information to UserImportant Safety Instructions Contents Using other functions Other SettingsOther connections Additional informationBefore you start FeaturesBefore you start Chapter Checking what’s in the boxLoading the batteries Installing the receiverBefore you start Ventilation Minute guide Automatically setting up for surround sound Mcacc02 5 minute guide Chapter Introduction to home theaterMake sure ‘OK’ is selected, then press Enter Minute guideProblems when using the Auto Mcacc Setup Better sound using Basic Phase Control02 5 minute guide Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections DVD player Connecting your equipment Connecting your TV and DVD playerConnecting a satellite/cable receiver or other set-top box Using the component video jacks Connecting a DVD/HDD recorder, VCR and other video sourcesUse an optical cable for the connection DVR, VCR, etcCD-R, MD, DAT, etc Connecting digital audio sourcesUse a three-way component video cable Connecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting the speakers Connecting your equipment Installing your speaker systemBanana plug connections Bare wire connectionsPlacing the speakers THX speaker system setup Connecting antennasPlug the power cord into a power outlet Connecting external antennasPlugging in the receiver AC outletControls and displays Chapter Controls and displaysFront panel STANDBY/ONControls and displays Operating range of remote control unitSleep Controls and displays DisplayOver / ATT Video ConvReceiver Controls and displays Remote controlInput Select SelectShift Multi OPESource MuteListening to your system Chapter Listening to your systemAuto playback Listening in surround sound Standard surround soundUsing the Advanced surround effects Using the Home THX modesSetting the effect options Listening to your systemListening with Acoustic Calibration EQ Press EFFECT/CH SEL again to adjust other settingsListening in stereo Use the +/- buttons to set it as necessaryUsing the Virtual Surround Back mode Listening to your system Choosing the input signalUsing the Sound Retriever Using Midnight and LoudnessUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Chapter Using the tunerSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Surround back speaker settingSelect ‘Manual MCACC’ from the System Setup menu System Setup menu Manual Mcacc setupSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSetting the Acoustic Calibration EQ automatically System Setup menuFine Speaker Distance Acoustic Calibration EQSetting the Acoustic Calibration EQ manually Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Front AlignSpeaker Setting Manual speaker setupChannel Level Crossover NetworkSpeaker Distance THX Speaker SetupTHX Audio Setting Connecting your XM Radio receiver Using XM RadioOther connections Other connections ChapterUsing XM HD Surround Connecting using HdmiSaving channel presets Other connectionsAbout Hdmi Second Zone speaker B setupSelecting the multichannel analog inputs Use standard RCA/phono jack cables for the connections2nd Zone setting only.1 Switching the speaker systemBi-amping your front speakers Connect your speakers as shown belowLarge Other connections Bi-wiring your speakersUsing this receiver with a Pioneer plasma display DVD player Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayOther Settings Chapter Other SettingsInput Assign menu Assigning the digital inputsOther Setup menu Other SettingsDynamic Range Control Setup Assigning the Hdmi inputsLFE Attenuator Setup Dual Mono SetupSR+ Setup for Pioneer plasma displays Video Converter SetupUsing other functions Chapter Using other functionsReducing the level of an analog signal Making an audio or a video recordingResetting the system Using other functions Using the sleep timerSwitching the speaker impedance Display shows RESET?Selecting preset codes directly Setting the remote to control other componentsProgramming signals from other remote controls Controlling the rest of your systemResetting the remote control presets Erasing one of the remote control button settingsConfirming preset codes Controlling the rest of your systemDirect function Use to switch direct function on or OFF then press EnterMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing System off Using multi operationsControls for other components Controlling the rest of your system Controls for TVsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorPower TroubleshootingAdditional information Additional information ChapterAdditional information Other audio problemsVideo SettingsDisplay Remote controlXM radio messages HdmiWindows Media Audio 9 Professional Additional information Surround sound formatsDolby About THX Stereo 2 channel signal formats Listening modes with different input signal formatsTHX Games Mode THX MusicModeAuto Multichannel signal formatsCleaning the unit Additional information SpecificationsDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX-1016TXV-K specifications

The Pioneer VSX-1016TXV-K is a versatile and powerful A/V receiver that brings a wealth of features and technologies to enhance your home entertainment experience. Built with the audiophile in mind, it combines high-performance sound quality with modern connectivity and smart functionality.

One of the main features of the VSX-1016TXV-K is its robust amplification system, which delivers an impressive 7.1-channel surround sound experience. With a total output of 110 watts per channel, this receiver is capable of driving a variety of speakers, ensuring that every audio detail is crisp and immersive. This makes it an ideal choice for both movie watchers and music enthusiasts.

The receiver supports numerous audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing lossless audio quality for high-definition content. This commitment to audio excellence is complemented by its use of advanced technologies such as the Pioneer MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the receiver's settings based on the acoustics of your room, ensuring optimal sound performance.

In terms of connectivity, the VSX-1016TXV-K is equipped with multiple HDMI inputs, which support 1080p video pass-through and are compatible with the latest HDMI standards. This makes it easy to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, allowing seamless switching between sources. The unit also includes component and composite video inputs, as well as optical and coaxial digital audio inputs for greater flexibility.

Additionally, the receiver features an integrated AM/FM tuner, allowing listeners to enjoy their favorite radio stations. The user-friendly on-screen display and menu system enable easy navigation through different settings and offers access to a wide range of features, including preset equalizer settings and listening modes.

The VSX-1016TXV-K is designed with aesthetics in mind, featuring a sleek black finish that fits well in any home theater environment. Its robust build quality ensures durability while providing an attractive addition to your audio setup.

In conclusion, the Pioneer VSX-1016TXV-K A/V receiver stands out in the crowded market of home audio equipment with its exceptional sound performance, extensive connectivity options, and thoughtful user features. Whether you're hosting movie nights or enjoying your favorite music, this receiver delivers an impressive and engaging listening experience.
Top Page Image Contents