Pioneer VSX-1016TXV-K operating instructions Hdmi, XM radio messages

Page 61

Additional information

12

HDMI

Symptom

Remedy

No picture or sound.

• If the problem still persists when connecting your HDMI component directly to your monitor, please

 

consult the component or monitor manual or contact the manufacturer for support.

 

 

No picture.

• Depending in the output settings of the source component, it may be outputting a video format that can’t

 

be displayed. Change the output settings of the source, or connect using the component, S-video or

 

composite jacks.

 

 

OSD does not appear.

• The OSD will not appear if you have connected using the HDMI output to your TV. Use component, S-

 

video, or composite connections when setting up the system.

 

 

No sound, or sound suddenly

• Since the HDMI audio signal is sent through this receiver to your TV, you need to make separate

ceases.

connections for audio if you want to hear your HDMI component through this system. See Connecting using

 

HDMI on page 41 for more on this.

 

• If you’ve made separate connections for audio, make sure you have assigned the analog/digital jack(s) to

 

the corresponding HDMI input for the component. See Assigning the HDMI inputs on page 47 to do this.

 

• Check the audio output settings of the source component.

 

 

XM radio messages

Symptom

Cause

Action

Check Antenna

The XM antenna is not connected.

Check that the XM antenna cable is attached securely.

 

 

 

XM ANT ERR

A short-circuit occurring in the antenna or

Make sure that there is nothing unusual with the antenna or

 

surrounding antenna cable.

antenna cable. Switch the power off then back on again.

 

 

 

Updating

The radio is being updated with the latest

Wait until the encryption code has been updated. Channels

 

encryption code.

00 and 01 should function normally.

 

 

 

No Signal

The XM signal is too weak at the current location.

n/a

 

 

 

Loading

The receiver is acquiring audio or program

Wait until the information has been received.

 

information.

 

 

 

 

Off Air

The channel currently selected has stopped

Select another channel.

 

broadcasting.

 

 

 

 

CH– – –

You have selected a channel that does not exist,

The receiver will automatically switch to channel 001 (or the

 

or that you have not subscribed to.

last selected channel).

 

 

 

– – – – – – – –

There is no artist name/feature, song/program

No action needed.

 

title, or channel category associated with the

 

 

channel at this time.

 

 

 

 

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

61

En

Page 60 Page 62
Image 61
Page 60 Page 62
Contents VSX-1016TXV-K Model Number VSX-1016TXV-K Responsible Party Name Federal Communications Declaration of ConformityKeep in a Secure AREA. this is for Your Security Information to UserImportant Safety Instructions Contents Using other functions Other SettingsOther connections Additional informationBefore you start FeaturesBefore you start Chapter Checking what’s in the boxBefore you start Ventilation Installing the receiverLoading the batteries Minute guide Automatically setting up for surround sound Mcacc02 5 minute guide Chapter Introduction to home theaterMake sure ‘OK’ is selected, then press Enter Minute guideProblems when using the Auto Mcacc Setup Better sound using Basic Phase Control02 5 minute guide Playing a sourceConnecting your equipment Chapter Connecting your equipmentRear panel When making cable connections Connecting your equipmentAbout the video converter Connecting a satellite/cable receiver or other set-top box Connecting your equipment Connecting your TV and DVD playerDVD player Using the component video jacks Connecting a DVD/HDD recorder, VCR and other video sourcesUse an optical cable for the connection DVR, VCR, etcUse a three-way component video cable Connecting digital audio sourcesCD-R, MD, DAT, etc Connecting analog audio sources Connecting a component to the front panel inputsAbout the WMA9 Pro decoder Tape deck, etcConnecting the speakers Connecting your equipment Installing your speaker systemPlacing the speakers Bare wire connectionsBanana plug connections THX speaker system setup Connecting antennasPlug the power cord into a power outlet Connecting external antennasPlugging in the receiver AC outletControls and displays Chapter Controls and displaysFront panel STANDBY/ONControls and displays Operating range of remote control unitSleep Controls and displays DisplayOver / ATT Video ConvReceiver Controls and displays Remote controlInput Select SelectShift Multi OPESource MuteListening to your system Chapter Listening to your systemAuto playback Listening in surround sound Standard surround soundUsing the Advanced surround effects Using the Home THX modesSetting the effect options Listening to your systemListening with Acoustic Calibration EQ Press EFFECT/CH SEL again to adjust other settingsListening in stereo Use the +/- buttons to set it as necessaryUsing the Virtual Surround Back mode Listening to your system Choosing the input signalUsing the Sound Retriever Using Midnight and LoudnessUsing the tone controls Press Tone to select the frequency you want to adjustUsing the tuner Chapter Using the tunerSaving station presets Listening to the radioNaming station presets Using the tunerListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Surround back speaker settingSelect ‘Manual MCACC’ from the System Setup menu System Setup menu Manual Mcacc setupSelect ‘Fine Ch Level’ from the Manual Mcacc setup menu Fine Channel LevelSetting the Acoustic Calibration EQ automatically System Setup menuFine Speaker Distance Acoustic Calibration EQSetting the Acoustic Calibration EQ manually Copying your Acoustic Calibration EQ settingsChecking your Acoustic Calibration EQ settings Front AlignSpeaker Setting Manual speaker setupChannel Level Crossover NetworkTHX Audio Setting THX Speaker SetupSpeaker Distance Connecting your XM Radio receiver Using XM RadioOther connections Other connections ChapterUsing XM HD Surround Connecting using HdmiSaving channel presets Other connectionsAbout Hdmi Second Zone speaker B setupSelecting the multichannel analog inputs Use standard RCA/phono jack cables for the connections2nd Zone setting only.1 Switching the speaker systemBi-amping your front speakers Connect your speakers as shown belowUsing this receiver with a Pioneer plasma display Other connections Bi-wiring your speakersLarge DVD player Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayOther Settings Chapter Other SettingsInput Assign menu Assigning the digital inputsOther Setup menu Other SettingsDynamic Range Control Setup Assigning the Hdmi inputsLFE Attenuator Setup Dual Mono SetupSR+ Setup for Pioneer plasma displays Video Converter SetupUsing other functions Chapter Using other functionsReducing the level of an analog signal Making an audio or a video recordingResetting the system Using other functions Using the sleep timerSwitching the speaker impedance Display shows RESET?Selecting preset codes directly Setting the remote to control other componentsProgramming signals from other remote controls Controlling the rest of your systemResetting the remote control presets Erasing one of the remote control button settingsConfirming preset codes Controlling the rest of your systemDirect function Use to switch direct function on or OFF then press EnterMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing System off Using multi operationsControls for other components Controlling the rest of your system Controls for TVsDecide which component you want to use the remote sensor Operating other Pioneer components with this unit’s sensorPower TroubleshootingAdditional information Additional information ChapterAdditional information Other audio problemsVideo SettingsDisplay Remote controlXM radio messages HdmiDolby Additional information Surround sound formatsWindows Media Audio 9 Professional About THX Stereo 2 channel signal formats Listening modes with different input signal formatsTHX Games Mode THX MusicModeAuto Multichannel signal formatsCleaning the unit Additional information SpecificationsOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-1016TXV-K specifications

The Pioneer VSX-1016TXV-K is a versatile and powerful A/V receiver that brings a wealth of features and technologies to enhance your home entertainment experience. Built with the audiophile in mind, it combines high-performance sound quality with modern connectivity and smart functionality.

One of the main features of the VSX-1016TXV-K is its robust amplification system, which delivers an impressive 7.1-channel surround sound experience. With a total output of 110 watts per channel, this receiver is capable of driving a variety of speakers, ensuring that every audio detail is crisp and immersive. This makes it an ideal choice for both movie watchers and music enthusiasts.

The receiver supports numerous audio formats, including Dolby TrueHD and DTS-HD Master Audio, providing lossless audio quality for high-definition content. This commitment to audio excellence is complemented by its use of advanced technologies such as the Pioneer MCACC (Multi-Channel Acoustic Calibration System), which automatically adjusts the receiver's settings based on the acoustics of your room, ensuring optimal sound performance.

In terms of connectivity, the VSX-1016TXV-K is equipped with multiple HDMI inputs, which support 1080p video pass-through and are compatible with the latest HDMI standards. This makes it easy to connect various devices such as Blu-ray players, gaming consoles, and streaming devices, allowing seamless switching between sources. The unit also includes component and composite video inputs, as well as optical and coaxial digital audio inputs for greater flexibility.

Additionally, the receiver features an integrated AM/FM tuner, allowing listeners to enjoy their favorite radio stations. The user-friendly on-screen display and menu system enable easy navigation through different settings and offers access to a wide range of features, including preset equalizer settings and listening modes.

The VSX-1016TXV-K is designed with aesthetics in mind, featuring a sleek black finish that fits well in any home theater environment. Its robust build quality ensures durability while providing an attractive addition to your audio setup.

In conclusion, the Pioneer VSX-1016TXV-K A/V receiver stands out in the crowded market of home audio equipment with its exceptional sound performance, extensive connectivity options, and thoughtful user features. Whether you're hosting movie nights or enjoying your favorite music, this receiver delivers an impressive and engaging listening experience.
Top Page Image Contents