Pioneer VSX-1014TX manual Overhead view of speaker setup, Hints on speaker placement

Page 21

Connecting up

Note

•The speaker terminals also accept single banana plugs. (Refer to speaker manual for details.)

•If you are using a THX certified subwoofer use the THX INPUT jack on the subwoofer (if your subwoofer has one) or switch the filter position to THX on your subwoofer.

Hints on speaker placement

Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while others should be placed on stands to sound their best. Some should be placed near a wall; others should be placed away from walls. We have provided a few tips on getting the best sound from your speakers (following), but you should also follow the guidelines on placement that the speaker manufacturer provided with your particular speakers to get the most out of them.

• Place the front left and right speakers at equal

distances from the TV.

• When placing speakers near the TV, we recommend

using magnetically shielded speakers to prevent

possible interference, such as discoloration of the

picture when the TV is switched on. If you do not have

magnetically shielded speakers and notice

discoloration of the TV picture, move the speakers

farther away from the TV.

• If you're using a center speaker, place the front

speakers at a wider angle. If not, place them at a

narrower angle.

• Place the center speaker above or below the TV so

03

•To achieve the best possible surround sound, install your speakers as shown below. Be sure all speakers are installed securely to prevent accidents and improve sound quality.

Caution

• If you choose to install the center speaker on top of the TV, be sure to secure it with putty, or by other suitable means, to reduce the risk of damage or injury resulting from the speaker falling from the TV in the event of external shocks such as earthquakes.

Overhead view of speaker setup

You can also refer to the 3-D speaker setup illustration on page 10.

Front

Center

Front

Left

Right

 

Subwoofer

Surround

 

Surround

Left

 

Right

Listening Position

Surround Back Left

 

Surround Back Right

Single Surround Back Speaker

The diagrams below show suggested surround and surround back speaker orientation. The first diagram (fig. A) shows orientation with one surround back speaker (or none) connected. The second (fig. B) shows orientation with two surround back speakers connected.

that the sound of the center channel is localized at

the TV screen. Also, make sure the center speaker

does not cross the line formed by the leading edge of

the front left and right speakers.

• It is best to angle the speakers towards the listening

position. The angle depends on the size of the room.

Use less of an angle for bigger rooms.

• Surround and surround back speakers should be

positioned a foot-and-a-half to three feet (60 cm–90

cm) higher than your ears and titled slight downward.

Make sure the speakers don't face each other. For

90~120

LS

LS

SB

fig. A

RS

LS

RS

 

 

0~60

RS

 

 

 

SBL

SBL SBR SBR

fig. B

DVD-Audio, the speakers should be more directly

behind the listener than for home theater playback.

•If you have two surround back speakers THX recommends placing them together and the same distance from your listening position.

21

En

Page 20 Page 22
Image 21
Page 20 Page 22
Contents VSX-1014TX Information to User Wash hands after handlingImportant Safety Instructions Contents Controlling the rest of your system Other SettingsOther connections Additional informationBefore you start FeaturesBefore you start Chapter Checking what’s in the boxInstalling the receiver Before you start VentilationLoading the batteries 02 5 minute guide Chapter Minute guideIntroduction to home theater Listening to Surround SoundMinute guide Powered subwooferFront speakers Surround speakers02 5 minute guide Enter Make sure ‘Normal SB’ is selected then pressFollow the instructions on-screen Checking the settings on your DVD or other player Other problems when using the Auto Mcacc SetupPlaying a source Connecting up Connecting up ChapterAbout cable types About the video converter Connecting upSatellite tuner CD recorder DVD or LD player CD player Connecting up Connecting digital audio componentsConnecting up Connecting analog audio components Connecting multichannel analog componentsTip Connecting up Connecting video components Connecting to the front panel video terminalVideo Camera FM wire antenna Connecting up Connecting antennasUsing external antennas AM loop antennaFront speakers Connecting the speakersHints on speaker placement Overhead view of speaker setupPower cord caution Connecting upView of 7.1 channel speaker setup AC outletControls and displays Listening Mode SelectControls and displays Chapter Front panelControls and displays Controls and displays Display Mono StereoTuned SleepControls and displays Remote control DTV ON/OFF 6TUNE/ST +/- /ENTERDTV Info Tuner DisplayOperating range of remote control unit Listening to your system Chapter Listening to your systemListening in surround sound Auto playbackUsing the Advanced surround effects Using the Home THX modesListening to your system PRO LogicNeo6 Music settings Dolby Pro Logic IIx Music settingsUse the +/- buttons to adjust the setting Press EFFECT/CH SEL again to adjust other settingsListening to your system Listening with Acoustic Calibration Choosing the input signalType of source Extended Mode Standard / THX Type of source VirtualSB Mode Standard Press SHIFT+DIALOG E to switch dialog enhancement on or off Using the tone controlsPress Tone to select the frequency you want to adjust Enhancing dialogListening to your system Playing other sources Using the sleep timerSelecting the multichannel analog inputs 30 minSystem Setup menu Chapter System Setup menuMaking receiver settings from the System Setup menu Surround back speaker settingManual Mcacc speaker setup System Setup menuSelect the surround back speaker setting Select ‘MANUAL MCACC’ from the System Setup menuFine Channel Distance Fine Channel LevelSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsFront Align Manual speaker setup Select the setting you want to checkSelect ‘Manual SP Setup’ then press Enter Select ‘Speaker Setting’ from the Manual SP Setup menu Speaker SettingChannel Level Crossover NetworkSpeaker Distance Select ‘Speaker Distance’ from the Manual SP Setup menuUsing the tuner Chapter Using the tunerTuning directly to a station Listening to the radioNaming station presets Using the tuner Saving station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzMaking recordings Chapter Making recordingsMaking an audio or a video recording Prepare the recorderSelecting preset codes directly Setting the remote to control other componentsControlling the rest of your system Controlling the rest of your system ChapterPress the Receiver button to exit and store the operations Use cursor left/right to select Learn then press EnterErasing all of the remote control presets Confirming preset codesDirect function Input Controlling the rest of your system Controls for TVsSelect DiscSHIFT+ CD/MD/CD-R/DVD/LDEnter Guide Controlling the rest of your systemHDD Shift + DVDSwitching the speaker system Second Zone speaker B setupOther connections Other connections ChapterBi-wiring your speakers Other connections Bi-amping your front speakersFront left Speaker Using this receiver with a Pioneer plasma display Other connections Connecting additional amplifiersUsing the SR+ mode with a Pioneer plasma display Other connectionsDVD player Other Settings Chapter Other SettingsInput Assign menu Assigning the digital inputsOther Settings Other Setup menuAssigning the component video inputs Dual Mono Setup Dynamic Range Control SetupSelect ‘DRC Setup’ from the Other Setup menu Choose the setting that you wantSR+ Setup for Pioneer plasma displays LFE Attenuator SetupSelect ‘LFE ATT Setup’ from the Other Setup menu Select ‘SR+ Setup’ from the Other Setup menuPower TroubleshootingAdditional information Additional information ChapterNo sound Additional informationDigital inputs on Other audio problemsAudio components on VideoDisplay SettingsControl unit on Remote controlAdditional information Resetting the main unit Switching the speaker impedancePress System Setup to confirm Dolby Additional information Surround sound formatsAdditional information About THX Cleaning the unit Additional information SpecificationsTo establish a safe level Once you have established a comfortable sound levelDecibel Level Example Pioneer Corporation

VSX-1014TX specifications

The Pioneer VSX-1014TX is a feature-rich AV receiver that has made a mark in the home theater market, thanks to its impressive performance and versatility. Designed for movie enthusiasts and music lovers alike, this receiver packs a punch with a wide array of technologies and features that enhance the audio and visual experience.

One of the standout features of the VSX-1014TX is its powerful amplification. With 100 watts per channel across seven channels, it delivers a robust performance that is capable of driving demanding speakers to their full potential. This ensures that every sound detail is reproduced with clarity, whether it's a quiet dialogue or the explosive sound effects of an action-packed film.

Equipped with Dolby Digital EX and DTS-ES decoding, the VSX-1014TX provides an immersive surround sound experience. It supports multiple audio formats, allowing users to enjoy high-quality audio from DVDs, Blu-rays, and streaming services. The receiver also features DTS Neo:6 and Pro Logic IIx, which can up-mix stereo content to impressive surround sound, giving new life to older music and movies.

Another significant feature is the inclusion of Pioneer's Multi-Channel Acoustic Calibration System (MCACC). This technology automatically analyzes the acoustics of the room and adjusts the receiver's settings accordingly. This means that whether you have a dedicated home theater or a simple living room setup, the VSX-1014TX ensures optimal sound quality tailored to your specific environment.

The connectivity options on the VSX-1014TX are extensive. It includes multiple HDMI inputs, component video inputs, and digital audio inputs, providing flexibility for various devices. The receiver is also compatible with high-definition audio formats, ensuring that users can enjoy the latest advancements in sound technology.

For added convenience, the VSX-1014TX features an intuitive on-screen display, making navigation through its settings straightforward. This, coupled with its customizable remote control, allows users to easily manage their home theater setup.

In summary, the Pioneer VSX-1014TX is an exceptional AV receiver that blends powerful performance with cutting-edge technology. Its robust amplification, immersive surround sound capabilities, intelligent calibration system, and extensive connectivity make it an ideal choice for anyone looking to elevate their audio-visual experience at home. Whether you're watching a movie or enjoying your favorite music, the VSX-1014TX is designed to deliver an engaging and high-quality experience.
Top Page Image Contents