Pioneer VSX-1014TX manual Other connections Chapter, Second Zone speaker B setup

Page 56

10Other connections

Chapter 10:

Other connections

Caution

•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in components should be the last connection you make with your system.

•Be careful not to allow any contact between speaker wires from different terminals.

•You can use speakers with a nominal impedance between 6–16Ω(please see Switching the speaker impedance on page 70 if you plan to use speakers with an impedance of less than 8Ω).

Second Zone speaker B setup

After selecting Second Zone in Surround back speaker setting on page 38, you can use the speakers connected to the (surround back) B speaker terminals on the rear panel to listen to stereo playback in another room. See Switching the speaker system below for the listening options with this setup.

1Connect a pair of speakers to the surround back speaker terminals on the rear panel.

Connect them the same way you connected your speakers in Connecting the speakers on page 20. Make sure to review Hints on speaker placement on page 21 when placing the speakers in another room.

2Select ‘Second Zone’ from the ‘Surr Back System’ menu.

See Surround back speaker setting on page 38 to do this.

56

Switching the speaker system

If you selected Second Zone in Surround back speaker setting on page 38, three speaker system settings are possible using the SPEAKERS button. If you selected Normal (SB) or Front Bi-Amp, the button will simply switch your main speaker system on or off. The options below are for the Second Zone setting only.

•Use the SPEAKERS button on the front panel to select a speaker system setting.

As mentioned above, if you have selected Normal (SB), the button will simply switch your main speaker system

(A) on or off.

TUNER

TUNING/

 

 

MIDNIGHT/

ACOUSTIC

DIALOG

MULTI CH

SIGNAL

EXTENDED

SPEAKERS

EDIT

STATION

BAND

MPX

LOUDNESS

TONE

EQ

ENHANCEMENT

IN

SELECT

MODE

TUNER

MULTI

 

 

 

MULTI

 

 

 

 

 

 

 

CONTROL

JOG

 

 

 

JOG

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO2 INPUT

 

 

 

SYSTEM

RETURN

INPUT

FL

 

MCACC

 

 

 

 

 

 

 

SETUP

ATT

DIMMER

 

SETUP MIC

 

 

 

 

 

 

 

MULTI JOG

 

 

 

 

 

 

 

 

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL IN

S-VIDEO

VIDEO

L

AUDIO

R

Press repeatedly to choose a speaker system option:

• SP A – Sound is output from speaker system A and the same signal is output from the pre-out terminals.

• SP B – Sound is output from the two speakers connected to speaker system B. Multichannel sources will not be heard. The same signal is output from the surround back channel pre-out terminals.

• SP AB – Sound is output from speaker system A (up to 5 channels, depending on the source), the two speakers in speaker system B, and the subwoofer. The sound from speaker system B will be the same as the sound from speaker system A (multichannel sources will be downmixed to 2 channels).

•SP (off) – No sound is output from the speakers. The same sound is output from the pre-out terminals (including from your subwoofer, if connected) as when selecting speaker system A (above).

Note

•The subwoofer output depends on the settings you made in Manual speaker setup on page 43. However,

if SP B is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).

•Depending on the settings in Surround back speaker setting on page 38 output from the surround back pre-out terminals may change.

•All speaker systems (except Second Zone connections) are switched off when headphones are connected.

En

Page 55 Page 57
Image 56
Page 55 Page 57
Contents VSX-1014TX Wash hands after handling Information to UserImportant Safety Instructions Contents Other Settings Controlling the rest of your systemOther connections Additional informationFeatures Before you startBefore you start Chapter Checking what’s in the boxLoading the batteries Installing the receiverBefore you start Ventilation Minute guide 02 5 minute guide ChapterIntroduction to home theater Listening to Surround SoundPowered subwoofer Minute guideFront speakers Surround speakers02 5 minute guide Make sure ‘Normal SB’ is selected then press EnterFollow the instructions on-screen Playing a source Checking the settings on your DVD or other playerOther problems when using the Auto Mcacc Setup About cable types Connecting upConnecting up Chapter Connecting up About the video converterConnecting up Connecting digital audio components Satellite tuner CD recorder DVD or LD player CD playerTip Connecting up Connecting analog audio componentsConnecting multichannel analog components Video Camera Connecting up Connecting video componentsConnecting to the front panel video terminal Connecting up Connecting antennas FM wire antennaUsing external antennas AM loop antennaConnecting the speakers Front speakersOverhead view of speaker setup Hints on speaker placementConnecting up Power cord cautionView of 7.1 channel speaker setup AC outletListening Mode Select Controls and displaysControls and displays Chapter Front panelControls and displays Controls and displays Display Stereo MonoTuned SleepControls and displays Remote control 6TUNE/ST +/- /ENTER DTV ON/OFFDTV Info Tuner DisplayOperating range of remote control unit Listening to your system Listening to your system ChapterListening in surround sound Auto playbackUsing the Home THX modes Using the Advanced surround effectsListening to your system PRO LogicDolby Pro Logic IIx Music settings Neo6 Music settingsUse the +/- buttons to adjust the setting Press EFFECT/CH SEL again to adjust other settingsChoosing the input signal Listening to your system Listening with Acoustic CalibrationType of source Extended Mode Standard / THX Type of source VirtualSB Mode Standard Using the tone controls Press SHIFT+DIALOG E to switch dialog enhancement on or offPress Tone to select the frequency you want to adjust Enhancing dialogUsing the sleep timer Listening to your system Playing other sourcesSelecting the multichannel analog inputs 30 minSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Surround back speaker settingSystem Setup menu Manual Mcacc speaker setupSelect the surround back speaker setting Select ‘MANUAL MCACC’ from the System Setup menuFine Channel Level Fine Channel DistanceAcoustic Calibration EQ Setting the Acoustic Calibration EQ automaticallyCopying your Acoustic Calibration EQ settings Front Align Setting the Acoustic Calibration EQ manuallyChecking your Acoustic Calibration EQ settings Select ‘Manual SP Setup’ then press Enter Manual speaker setupSelect the setting you want to check Speaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuCrossover Network Channel LevelSelect ‘Speaker Distance’ from the Manual SP Setup menu Speaker DistanceUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzMaking recordings Making recordings ChapterMaking an audio or a video recording Prepare the recorderSetting the remote to control other components Selecting preset codes directlyControlling the rest of your system Controlling the rest of your system ChapterUse cursor left/right to select Learn then press Enter Press the Receiver button to exit and store the operationsDirect function Erasing all of the remote control presetsConfirming preset codes Controlling the rest of your system Controls for TVs InputSelect DiscCD/MD/CD-R/DVD/LD SHIFT+Controlling the rest of your system Enter GuideHDD Shift + DVDSecond Zone speaker B setup Switching the speaker systemOther connections Other connections ChapterFront left Speaker Bi-wiring your speakersOther connections Bi-amping your front speakers Other connections Connecting additional amplifiers Using this receiver with a Pioneer plasma displayDVD player Using the SR+ mode with a Pioneer plasma displayOther connections Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsAssigning the component video inputs Other SettingsOther Setup menu Dynamic Range Control Setup Dual Mono SetupSelect ‘DRC Setup’ from the Other Setup menu Choose the setting that you wantLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysSelect ‘LFE ATT Setup’ from the Other Setup menu Select ‘SR+ Setup’ from the Other Setup menuTroubleshooting PowerAdditional information Additional information ChapterAdditional information No soundOther audio problems Digital inputs onVideo Audio components onSettings DisplayRemote control Control unit onPress System Setup to confirm Additional information Resetting the main unitSwitching the speaker impedance Additional information Surround sound formats DolbyAdditional information About THX Additional information Specifications Cleaning the unitDecibel Level Example To establish a safe levelOnce you have established a comfortable sound level Pioneer Corporation

VSX-1014TX specifications

The Pioneer VSX-1014TX is a feature-rich AV receiver that has made a mark in the home theater market, thanks to its impressive performance and versatility. Designed for movie enthusiasts and music lovers alike, this receiver packs a punch with a wide array of technologies and features that enhance the audio and visual experience.

One of the standout features of the VSX-1014TX is its powerful amplification. With 100 watts per channel across seven channels, it delivers a robust performance that is capable of driving demanding speakers to their full potential. This ensures that every sound detail is reproduced with clarity, whether it's a quiet dialogue or the explosive sound effects of an action-packed film.

Equipped with Dolby Digital EX and DTS-ES decoding, the VSX-1014TX provides an immersive surround sound experience. It supports multiple audio formats, allowing users to enjoy high-quality audio from DVDs, Blu-rays, and streaming services. The receiver also features DTS Neo:6 and Pro Logic IIx, which can up-mix stereo content to impressive surround sound, giving new life to older music and movies.

Another significant feature is the inclusion of Pioneer's Multi-Channel Acoustic Calibration System (MCACC). This technology automatically analyzes the acoustics of the room and adjusts the receiver's settings accordingly. This means that whether you have a dedicated home theater or a simple living room setup, the VSX-1014TX ensures optimal sound quality tailored to your specific environment.

The connectivity options on the VSX-1014TX are extensive. It includes multiple HDMI inputs, component video inputs, and digital audio inputs, providing flexibility for various devices. The receiver is also compatible with high-definition audio formats, ensuring that users can enjoy the latest advancements in sound technology.

For added convenience, the VSX-1014TX features an intuitive on-screen display, making navigation through its settings straightforward. This, coupled with its customizable remote control, allows users to easily manage their home theater setup.

In summary, the Pioneer VSX-1014TX is an exceptional AV receiver that blends powerful performance with cutting-edge technology. Its robust amplification, immersive surround sound capabilities, intelligent calibration system, and extensive connectivity make it an ideal choice for anyone looking to elevate their audio-visual experience at home. Whether you're watching a movie or enjoying your favorite music, the VSX-1014TX is designed to deliver an engaging and high-quality experience.
Top Page Image Contents