Front Panel Facilities MULTI-JOG | Pioneer VSX-D3S guide

FRONT PANEL FACILITIES

9MULTI-JOG

Use during tuner operation to select frequencies and station numbers. During GUI operation, use to move the on-screen cursor.

Auto stereo mode

Normally, leave in this mode for reception. When a stereo FM broadcast is received, it will be automatically reproduced in stereo.

Monaural mode

0GUI ENTER button (GUI operation)

Press to execute an operation selected with the MULTI-JOG.

-INPUT ATT button

Press on, and audio input sensitivity is attenuated (–10 dB) to prevent clipping due to excessively high input levels. Switch this on if the overload indicator in the display section lights during playback. When you switch it on, the ATT indicator lights.

NOTE:

Operates only when a DSP mode other than AC-3 is on.

=GUI MODE button

Switches GUI MODE on and off.

~MASTER VOLUME control

Use it to simultaneously adjust the sound volume from the front, center, and rear speakers.

When receiving distant stations or stations with weak broadcast signals, the input signal may be weak, thus resulting in increased noise during FM stereo broadcasts. In this event, setting the receiver to the monaural mode will reduce the noise. In this case, however, FM stereo broadcasts will be reproduced in monaural sound.

NOTE:

This button has no effect on reception of AM broadcasts.

MEMORY button:

Press this button to switch to the frequency preset mode.

SELECT button:

Press this button to switch to the station mode. Then you can turn the multi-jog to select a station.

&DSP OFF button**

Switches DSP (( DSP MODE, * DOLBY PRO-LOGIC, 8 AC-3) off.

DOLBY PRO-LOGIC button**

!SLEEP button/indicator

Activates the SLEEP timer. The length changes in the following manner each time the button is pressed:

3 90

3 60

3 30

0 (off) 2

Unit: minutes

@PHONES jack

Connect the plug on your headphones to this jack. Set SPEAKERS A and B switches to off if you want to cut the sound from the speakers and listen to it only through the headphones.

Switches DOLBY PRO-LOGIC SURROUND on and off.

(DSP MODE button**

Each time you press it, the mode and the display indications change as follows:

3 JAZZ	3 DANCE	3 HALL
off 2	THEATER 2	SIMULATED	2
		SURROUND

)SUPER BASS button**

Press this button when you want to boost the bass.

#VIDEO INPUT jacks

VIDEO components such as a VCR or TV camera, etc. can be connected.

_BASS control

Use to adjust the low-frequency level. Turn clockwise to boost bass, and counterclockwise to attenuate bass.

$DIRECT button**/indicator

Press this to listen to source sound without passing the audio signal through sound quality and balance adjusting circuitry. DSP, super bass, INPUT ATT, rear and center speakers are automatically switched off.

%Display section

See page 15.

^TUNING MODE buttons

FM/AM button:

Use this to switch between FM and AM frequency band reception.

MPX MODE button:

Use to select the auto stereo mode or monaural mode when listening to FM broadcasts. The monaural mode has been selected when the MONO indicator in the display section is lit.

+TREBLE control

Use to adjust the high-frequency level. Turn clockwise to boost treble, and counterclockwise to attenuate treble.

¡SUPER BASS control

Use to adjust the bass boost level when the SUPER BASS button is set to on.

**Setting is memorized separately for each input selector button.

Manufactured under license from Dolby Laboratories Licensing Corporation. Additionally licensed under Canadian patent number 1,037,877. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

Fabriqué sous licence de Dolby Laboratories Licensing Corporation et sous le brevet suivant: Canada 1,037,877. DOLBY, AC-3, PRO LOGIC et le symbole double-D, sont des marques de Dolby Laboratories Licensing Corporation.