RECORDING WITH A CASSETTE DECK
RECORDING WITH TAPE 1
If the TAPE 2 MONITOR button is on, press to turn off.
1
TAPE 2 MONITOR
1.Select the source you want to record from with the input selector buttons.
When recording AM or FM broadcasts, select a preset station using the
2.Start recording on TAPE 1 cassette deck.
3.Play the desired program source (record, compact disc, etc.). The volume, balance and tone controls have no effect on the recording.
RECORDING WITH TAPE 2
1.Select the source you want to record from with the input selector buttons.
2.Start recording on the TAPE 2 cassette deck.
3.Play the desired program source (record, compact disc, etc.). The volume, balance and tone controls have no effect on the recording.
18
USING VCR 1, VCR 2 FOR AUDIO RECORDING
The audio signal output from the VCR 1 and VCR 2 AUDIO OUT jacks is the same as that output from the TAPE 1 REC jacks, so you can record using the same procedure as for recording with TAPE 1.
COPYING TAPES
1
The following operations concern TAPE 1 to TAPE 2 copying.
1.Press the TAPE 1 input selector button.
2.Load the TAPE 1 cassette deck with a tape to playback.
3.Load the TAPE 2 cassette deck with a tape to record to.
4.Start recording on the TAPE 2 cassette deck.
5.Start playback on the TAPE 1 cassette deck.
The following operations concern TAPE 2 to TAPE 1 copying.
1.Select a source other than TAPE 1 with the input selector buttons.
2.Press the TAPE 2 MONITOR button to turn it on.
3.Load the TAPE 2 cassette deck with a tape to playback.
4.Load the TAPE 1 cassette deck with a tape to record to.
5.Start recording on the TAPE 1 cassette deck.
6.Start playback on the TAPE 2 cassette deck.
Tape monitoring
When recording is performed on a cassette deck equipped with a monitoring function, the recorded sound can be monitored through the speaker system by pressing the TAPE 2 MONITOR button to ON.
<ARB7050>