Connecting up | 04 |
Microsoft, Windows Media®, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
Connecting other video components
This receiver has audio/video inputs and outputs suitable for connecting analog or digital video recorders, including VCRs, DVD- recorders and HDD recorders.
1Connect a set of audio/video outputs on the recorder to the DVR/VCR AUDIO and VIDEO inputs on this receiver.
Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.
2Connect a set of audio/video inputs on the recorder to the DVR/VCR AUDIO and VIDEO outputs on this receiver.
Use a stereo RCA phono cable for the audio connection and a standard RCA video cable for the video connection.
3If your video component has a digital audio output, connect it to a digital input on this receiver.
The example shows a recorder connected to the DIGITAL COAX 2 (DVR/VCR) input.1
This receiver
|
|
|
|
| FM UNBAL | AM |
|
|
|
|
|
| 75Ω | LOOP ANTENNA |
|
|
| IN |
|
|
|
|
|
|
| IN |
| DVR/ |
|
|
|
| OPT |
|
| VCR |
|
|
|
| 1 |
|
|
|
|
|
|
| (CD) | OUT |
|
| IN |
|
|
| ASSIGNABLE |
|
| TV/ |
|
| |
| DIGITAL IN |
|
|
| OUT |
| |
|
| IN |
| SAT |
|
| |
|
|
|
| IN |
|
| |
|
|
|
|
|
|
| |
|
|
|
| DVD |
| MONITOR |
|
| ASSIGNABLE | IN |
| /LD |
| OUT |
|
|
| FRONT |
|
|
| ||
| DIGITALIN |
|
|
| D V D |
|
|
| COAX |
|
| PLAY | 5.1CH | SUB |
|
| 2 |
|
|
| INPUT |
| |
|
|
|
| IN | WOOFER |
| |
| (DVR/VCR) |
|
|
|
| ||
| IN |
|
| PREOUT |
| ||
| COAX |
|
| /TAPE |
|
|
|
|
|
| /MD |
|
|
| |
| 1 |
|
|
|
|
| |
|
|
|
|
|
|
| |
| (DVD/LD) | OUT |
| REC |
|
|
|
|
| R | AUDIO | L |
|
|
|
3 | 2 |
|
|
| 1 |
| |
OPTICAL | COAXIAL |
| R IN | L |
| R OUT L |
|
|
|
| REC |
|
| PLAY |
|
DIGITAL OUT |
| AUDIO IN |
| VIDEO IN | AUDIO OUT | VIDEO OUT | |
DVR, VCR, LD player, etc.
English Deutsch Français Italiano Nederlands Español
Note
1If your video component doesn’t have a digital audio output, omit this step. If it only has an optical digital output, you can con- nect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver which input you connected the component to (see The Input Assign menu on page 39).
15
En