Pioneer VSX-516-S/-K Digital, Dts, Analog, Vir.Sb, Direct, Auto Surr, Att, Sleep, Stereo

Page 22

05Controls and displays

1 SIGNAL SELECT indicators

Lights to indicate the type of input signal assigned for the current component:

AUTO

Lights when AUTO signal select is on.

SB (VSX-516 model only)

Depending on the source, this lights when a signal with surround back channel encoding is detected.

DIGITAL

Lights when a digital audio signal is detected.

DTS

Lights when a source with DTS encoded audio signals is detected.

2DIGITAL

Lights when a Dolby Digital encoded signal is detected.

ANALOG

Lights when an analog signal is detected.

2

Lights to indicate decoding of a DTS multichannel signal.

3 2 DIGITAL

Lights to indicate decoding of a Dolby Digital multichannel signal.

42 PRO LOGIC IIx (VSX-516 model) / 2 PRO LOGIC II (VSX-416 model)

2PRO LOGIC II lights to indicate Pro Logic II decoding. 2 PRO LOGIC IIx lights to indicate Pro Logic IIx decoding (see Listening in surround sound on page 28 for more on this).

5 VIR.SB

Lights during Virtual surround back processing (page 32).

6 DIRECT

Lights when source direct playback is in use. Direct playback bypasses the tone controls for the most accurate reproduction of a source.

7 AUTO SURR.

Lights when the Auto Surround feature is switched on (see Auto playback on page 28).

22

8 ATT

Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.

9 SLEEP

Lights when the receiver is in sleep mode.

10Tuner indicators

/ MONO

Lights when the mono mode is set using the MPX button.

/ STEREO

Lights when a stereo FM broadcast is being received in auto stereo mode.

/ TUNED

Lights when a broadcast is being received.

11Speaker indicator

Shows if the speaker system is on or not. SP A means the speakers are switched on. SP means the headphones are connected.

12Sound Retriever indicators (VSX-516 model only)

Light when the Sound Retriever is switched on (page 33).

13Character display

14Neo:6 (VSX-516 model only)

Lights to indicate Neo:6 processing.

15ADV.SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected.

16WMA9 Pro

Lights to indicate decoding of a WMA9 Pro signal.

17 MIDNIGHT

Lights during Midnight listening (page 33).

18 D.E.

Lights when Dialog Enhancement (DIALOG E) is switched on (page 33).

19 LOUDNESS

Lights during Loudness listening (page 33).

20EX (VSX-516 model only)

Lights when a Dolby Digital Surround EX encoded signal is detected.

En

Image 22
Contents VSX-416-S/-KVSX-516-S/-K Important the Moulded Plug Risk of Electric Shock Do not OpenVentilation Caution Voltage selectorOperating Environment Contents Before you start Chapter Operating range of remote control unitBefore you start Checking what’s in the boxBefore you start Installing the receiver Introduction to home theater Minute guideMinute guide Chapter Listening to Surround Sound02 5 minute guide Using the Quick Setup Setup MIC jack on the front panel Quick surround sound setupQuick surround sound setup Chapter Connect the microphone to the McaccOther problems during Auto Mcacc Quick surround sound setupEnter Connecting up Chapter Connecting upMaking cable connections Connect the analog audio outputs from Connecting up Connecting a TV and DVD playerThis receiver to a video input on your TV Connecting up Connecting the multichannel analog outputsAbout the WMA9 Pro decoder Connecting up Connecting other audio componentsCD-R, MD, DAT, Tape recorder, etc Connecting other video components DVR, VCR, LD player, etcShaped Connecting up Connecting antennasUsing external antennas PlugConnecting up Connecting the speakers English Deutsch Français ItalianoSpeaker terminals Hints on speaker placementTwist exposed wire strands together Release the tabsSpeaker placement diagrams Following illustrations show a 6.1 channel speaker setup.1Input select buttons Controls and displaysControls and displays Chapter Character display See Display onControls and displays DisplayDTS AutoDigital AnalogInput Select Receiver Remote control VSX-516Input Select ADV.SURRMute Master Volume +Retriever Dialog EREC Stop AccessHDD/DVD Tuner DispVolume + Controls and displays Remote control VSX-416EFFECT/CH SEL 10 /ENTER DVD/DVRDisplay Auto playback Listening to your systemListening to your system Chapter Listening in surround soundPress ‘ADV.SURR’ repeatedly to select a listening mode Using the Advanced surround effectsSetting the effect options Listening to your systemListening in stereo Press EFFECT/CH SEL again to adjust other settingsFor stereo playback Using surround back channel processing Choosing the input signalWhile listening to a source, press Listening to your system Using Virtual Surround Back VSB VSB OFF Virtual Surround Back mode is switched offUsing the Sound Retriever Listening to your system Using Midnight and LoudnessUsing the tone controls Enhancing dialogUsing the System Setup menu System Setup menuSystem Setup menu Chapter Manual Mcacc speaker setupFine Channel Level System Setup menuFine Speaker Distance Select ‘EQ COPY’ from the Manual Mcacc setup menu Select ‘EQ A. SET’ from the Manual Mcacc setup menuWait for the EQ Auto Setup to finish Acoustic Calibration EQUse Adjust to your likingTo copy ConfirmUsing To check the settings Manual speaker setupSpeaker setting Select SP SET from the SP Setup menuChannel level Input Assign menuCrossover network Speaker DistanceDual Mono Setup Other setup menuDynamic Range Control Setup LFE Attenuator SetupSaving station presets Using the tunerUsing the tuner Chapter Listening to the radioChanging the frequency step Using the tunerListening to station presets Press AM or FM to select the tunerMaking recordings Chapter Making recordingsMaking an audio or a video recording Use the number buttons to enter the preset code Setting the remote to control other componentsSelecting preset codes directly Controlling the rest of your systemClearing all the remote control settings Controlling the rest of your system Direct functionInput Controlling the rest of your system Controls for TVsSelect Disc Controlling the rest of your systemControls for other components SHIFT+SHIFT+ Audio SHIFT+Enter Guide SHIFT+ HDDDVD Recorder Controlling the rest of your system Preset Code ListOn digital STB Manufacturer CodeAdditional information TroubleshootingAdditional information Chapter Are set for surround back sound Speaker settingsAdditional information Or PlusPress Setup to confirm Additional information Resetting the main unitPower cord caution OK? shows in the displayAdditional information Specifications Cleaning the unit Furnished PartsPioneer Corporation