Service Info, Troubleshooting, Repair | Mackie CR1604

SERVICE INFO

Details concerning Warranty Service are spelled out on the Warranty Card included with your mixer (if it’s missing, let us know and we’ll rush one to you).

If you think your CR1604-VLZ has a problem, please do everything you can to confirm it before calling for service. Doing so might save you from being deprived of your mixer.

Of all Mackie products returned for service (which is hardly any at all), roughly 50% are coded “CND” — Could Not Duplicate, which usually means the problem lies somewhere other than the mixer. These may sound obvious to you, but here’s some things you can check:

TROUBLESHOOTING

Bad Channel

•Are the channels assigned to the correct mix (1-2, 3-4, L-R)?

•Is the fader up?

•Try unplugging any insert devices from the

INSERT jacks.

•Try the same source signal in another channel, set up exactly like the suspect channel.

Bad Output

•Is the associated level control (if any) turned up?

•If you’re listening to the C-R OUTS or PHONES outputs, has a SOURCE selection been made?

•If it’s one of the MAIN OUTS, try unplugging its companion. For example, if it’s the 1/4" LEFT MAIN OUT, unplug the RCA output. If the problem goes away, it’s not the mixer.

•If it’s a stereo pair, try switching them around. For example, if a left output is presumed dead, switch the left and right cords, at the mixer end. If the problem stays on the left, it’s not the mixer.

•Unplug everthing from the MAIN INSERTS.

Noise

•Turn the channel faders and AUX RETURN knobs down, one by one. If the sound disap- pears, it’s either that channel or whatever is plugged into it, so unplug whatever that is. If the noise disappears, it’s from your whatever.

Power

Our favorite question: Is the POWER switch on? Check the fuse .

REPAIR

Service for the U.S. version of the CR1604-VLZ is only available from Mackie Designs, located in sunny Woodinville, Washington. (Service for mixers living outside the United States can be obtained through local dealers or distributors.) If your mixer needs service, follow these instructions:

1.Review the preceding troubleshooting suggestions. Please.

2.Call Tech Support at 1-800-258-6883, 8am to 5pm PST, to explain the problem and request an R.A. number. Have your mixer’s serial number ready. You must have a

Return Authorization number, or we may refuse the delivery.

3.Set aside the power cord, owner’s manual, or anything else that you’ll ever want to see again. We are responsible for the return of the mixer only.

4.Pack the mixer in its original package, including endcaps and box. This is VERY IMPORTANT. If you don’t have a box, please let Tech Support know that you need a new one when you call for the R.A. number.

5.Include a legible note stating your name, shipping address (no P.O. boxes), daytime phone number, R.A. number and a detailed description of the problem, including how we can duplicate it.

6.Write the R.A. number in BIG PRINT on top of the box.

7.Ship the mixer to us. We recommend United Parcel Service (UPS). We suggest insurance for all forms of cartage. Ship to this address:

Mackie Designs Inc.

SERVICE DEPARTMENT 16220 Wood-Red Rd. NE Woodinville, WA 98072

8.We’ll try to fix the mixer within three business days. We send everything back prepaid using UPS BLUE (Second Day Air). If you rush your mixer to us by Air Shipment, we’ll treat it in kind by letting it jump to the head of the line, and we’ll also ship it back to you UPS RED (Next Day Air). This paragraph does not necessarily apply to non-warranty service.