Mackie CR1604 - VLZ owner manual Mults and Ys

MULTS AND “Y”s

A mult or “Y” connector allows you to route one output to two or more inputs by simply providing parallel wiring connections. You can make “Y”s and mults for the outputs of both unbalanced and balanced circuits.

Remember: Only mult

or “Y” an output into sev-

eral inputs. If you need

to combine several out- puts into one input, you

must use a mixer, not a mult or a “Y.”

	RING (IN)
RING (RETURN)	RING	TIP
	(RETURN)	(SEND)
	TIP (OUT)

FROM

TO MIXER CHANNEL INSERT

PROCESSOR

OUTPUT

TO

PROCESSOR

INPUT

TIP (SEND)

Y-cord insert cable

Y-cord splitter cable

45