Mackie PPM1012 owner manual Appendix C Technical Information, Specifications

Page 31

Appendix C: Technical Information

Specifications

Owner’s

Distortion (THD + N)

(1 kHz, 30 kHz bandwidth)

Mic mono:

<0.003%

 

<0.003%

Line mono:

<0.005%

Line stereo

<0.003% at main out

Main mix output noise

(1 kHz, 30 kHz bandwidth)

Main mix level down, all channel levels down: –95 dBu

Main mix level 0 dB, all channel levels down: –89 dBu

Main mix level 0 dB, all channel levels 0 dB: –84 dBu

Frequency Response

(+0 dB/–3 dB)

Mic mono input:

< 10

Hz–100 kHz

Line mono inputs:

< 10

Hz–32 kHz

Line stereo inputs:

< 10

Hz–80 kHz

Equivalent Input Noise (EIN)

Mic input (20 Hz – 20 kHz)

150 ohm termination:

–128 dBu

9-Band Graphic EQ

Main and Monitor 1:

±15 dB @

 

63, 125, 250, 500, 1k,

 

2k, 4k, 8k and 16 kHz

Connections

Mic input:

XLR balanced

Line mono input:

1/4" TRS balanced

Line stereo input:

1/4" TRS balanced

Main outputs:

1/4" TRS balanced

Monitor outputs:

1/4" TRS balanced

Inserts:

1/4" TRS unbalanced

Loudspeaker outputs:

1/4" TS and Neutrik

 

Speakon

Loudspeaker outputs

(Both channels loaded and driven at 1 kHz.)

Peak output power @ 4 ohms:

2 x 800 watts peak

Average output power @ 4 ohms:

2 x 400 Wrms, 1% THD

 

2 x 500 Wrms, 3% THD

Average output power @ 8 ohms:

2 x 250 Wrms, 1% THD

 

2 x 300 Wrms, 3% THD

Recommended load impedance:

4 – 8 ohms per side

Manual

Gain

Mic mono input:

0 dB to +50 dB

Line mono inputs:

–20 dB to +30 dB

Line stereo inputs:

–20 dB to +20 dB

Maximum Levels

Mic mono input:

+21 dBu minimum gain

Line mono inputs:

+21 dBu

Line stereo inputs:

+21 dBu

Preamp main and monitor outputs:

+21 dBu

Impedances

Mic mono input:

3.6 kilohms balanced

Line mono input:

20 kilohms balanced

Line mono input, Ch 7, 8 Hi-Z:

500 kilohms unbalanced

Line stereo inputs:

20 kilohms balanced

Main and monitor outputs:

240 ohms balanced

 

120 ohms unbalanced

Channel EQ

High Shelving (all channels)

±15 dB @ 12 kHz

Mid Mono Channels:

 

Mid Peaking, sweepable

±15 dB

Mid sweep range:

100 Hz to 8 kHz

Mid Stereo Channels:

 

Hi Mid Peaking:

±15 dB @ 2.5 kHz

Lo Mid Peaking:

±15 dB @ 400 kHz

Low Shelving (all channels)

±15 dB @ 80 Hz

Phantom Power

 

 

 

Running Man Effects

Type:

Two 32-bit internal

 

processors,

 

mono in, stereo out

Effects presets:

24 Mackie-designed

 

presets

Power Consumption

100–120 VAC, 50/60 Hz:

250 watts

220–240 VAC, 50/60 Hz:

250 watts

Dimensions (H x W x D)

19.2" x 17.4" x 5.2" (487 mm x 442 x 133)

Weight

29 lb (13.2 kg)

LOUD Technologies Inc. is always striving to improve our prod- ucts by incorporating new and improved materials, components, and manufacturing methods. Therefore, we reserve the right to change these specifications at any time without notice.

“Mackie,” and the “Running Man” are registered trademarks of LOUD Technologies Inc. All other brand names mentioned are trademarks or registered trademarks of their respective hold- ers, and are hereby acknowledged.

The technical writer responsible for this manual tends to fade in and out of various different realities, depending on how many cups of tea he has had. Please check our website for any updates to this manual: www.mackie.com.

©2008 LOUD Technologies Inc. All Rights Reserved.

+48 VDC, globally switchable to all Mic inputs

Owner’s Manual

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents PPM1012 PPM1012 Important Safety InstructionsPlay something into that input at real-world levels To try out your new powered mixer. PleaseDisengage the channels solo switch Read ThisIntroduction Headphones play main mix, or soloed channelsContents Microphones Portable Recorder Hookup DiagramsHouse of Worship DJ System Band System SPEAKER-LEVEL Outputs PPM1012 FeaturesPower Switch Rear PanelConnection Section Phantom PowerMIC Inputs MON Send 1 and MON Send Insert Ch toFX Send 1 and FX Send Main Outputs Tape InputsTape Outputs Main InsertsLUNCH-TIME Decoupler FX Footswitch ConnectorBNC Lamp Connection LevelLike Unity gain Signal FlowChannel Controls Stereo Channels 9/10 and 11/12LOW CUT Channels 1-8 only Gain ControlIng levels Dynamic range is the difference in level be Compressor Channels 1-6 onlyChannel Equalization EQ HI-Z Switch Ch and 8 onlyMON 2 AUX Send High EQ36. FX2 AUX Send Channel Fader Mute switch and LEDPAN 39. -20, 0, +10, OL Channel Meter LEDsIt is safe to do so Power LEDMaster Controls Affected by it anyway Never plug single-ended unbalancedMON 1 Equalizer Power AMP Limiter LEDsMain EQ Assign Tape Power AMP Mode SwitchMain MIX Meters Rude Solo LightMono OUT LPF Low-Pass-FilterMost active subwoofers have their own Monitor 1 Fader and Monitor 2 Fader FX 1 to MON 1 and FX 1 to MONFX RTN 1 Fader and FX RTN 2 Fader Main FaderThere are two identical Mackie Running-Man Stereo Effects Processors60. FX1 Send Master and FX2 Send Master SIG/OL LEDInternal FX Mute Preset DisplayRepair Appendix a Service InformationTroubleshooting Is phantom power required for your micro- phones?Appendix B Connections XLR ConnectorsRCA Plugs and Jacks Loudspeaker Cable SpeakonsInterrupting normal operation Specifications Appendix C Technical InformationPPM1012 FX2 Block DiagramTitle Description Example of its use Appendix D Table of Effects PresetsPPM1012 Limited Warranty
Top Page Image Contents