5) D/R (delay/reverb)
This provides spatial effects such as reverb and delay.
•BYPASS·TUNE button: Turn the effect on/off
•+/– buttons: Select the effect type
•Value dial: Specify the effect level
It is not possible to turn noise reduction off.
If this value is raised excessively, the sound may be cut off prematurely, depending on the de- vice that is connected. If this occurs, reduce the value.
7) LEVEL
Adjust the level for each program using the Value dial. Depending on the effect settings, the output may be distorted (clipped), so you should adjust this so that distortion does not occur.
6) NR (noise reduction)
Adjust the depth of noise reduction. Raising this val- ue will produce more noise reduction. Normally you will adjust this so that you do not hear obtrusive noise when the strings are lightly muted.
•Value dial: Adjust the depth of noise reduction
•Value dial: Select the level for each program
The volume of each program will change de- pending on the bass you use. Adjust the level appropriately for your bass.
32