2) AMP (amplifier)
This produces sounds that models a bass amp. For SLD and TUBE types, the value dial adjusts the mix balance between the line (direct) sound and the modeling sound. For the
•BYPASS / TUNE button: Turn the effect on/off
•+/– buttons: Select the amp type
•Value dial: Set the mix balance or boost setting
3)EQ (equalizer)
This is a
•BYPASS / TUNE button: Turn the effect on/off
•+/– buttons: Select bands or trim values
•Value dial: Set the gain or trim values
Depending on the EQ settings, the output may be distorted (clipped), or conversely reduced in volume, so adjust the Trim to produce an ap- propriate output level.
4) MOD (modulation)
This provides
•BYPASS·TUNE button: Turn the effect on/off
•+/– buttons: Select the effect type
•Value dial: Specify the parameter value.
31