Korg PX3B manual Rename, BYPASS·TUNE button Write

8) RENAME

Here you can specify a name for each program.

•+/– buttons: Select the character location (the selected character will blink)

•Value dial: Select the character

The following characters can be used: space, 0–9,A–Z, “, ‘, ✳, +, -, /

9) WRITE

Here you can write (store) an edited program or a program that you created.

Use the Value dial to select the writing destination (User programs only). When you do so, the name of the program that currently occupies the writing destination will be displayed briefly.

If you decide not to write, press the EDIT √ button to select a different screen.

When you press the BYPASS·TUNE button, the edited program will be written into memory.

When the program has been written, the LCD will indicate “COMPL” for approximately one second.

•BYPASS·TUNE button: Write

•Value dial: Select a user program number as

the writing destination

Before writing an edited program into a differ- ent program number, be sure that you do not mind overwriting the data that is currently in that program number. The program data that is over- written will be lost.

It is not possible to write to a preset program.

33