Korg ES-1 manual Connector section, Power switch

Page 12

2. Front and rear panel

Connector section

1

2

3

4

5

6 7

8

9

10

1.Power switch

This switch turns the power on/off. Each time you press it, the power will alternate between on or off.

2.DC 9V

Connect the included AC adapter here.

3.Adapter cable holder

Hook the adapter cable around this so that it will not be disconnected accidentally.

4.SmartMediaTM slot

A SmartMediaTM card can be inserted into this slot. Use this when you wish to save or load ES-1data.

5.MIDI connectors

IN MIDI data is received at this connector to control the ES-1from an external MIDI device or to receive a data dump.

OUT MIDI data is transmitted from this connector to control an external MIDI de vice or to transmit a data dump.

THRU MIDI data received at the MIDI IN connector is re-transmitted without change from this connector. This is used to "daisy-chain" multiple MIDI devices.

6.MIC/LINE (gain select switch)

This switches the input gain of the audio input. When a mic is connected, set this to the MIC position. Otherwise, set this to the LINE position.

7.LEVEL (input level)

This adjusts the input level of the audio input.

8.ST./MONO (audio in jack)

This jack is used for the audio in part. The sound that is input here will be used as the sound of the Audio In part select key. If the input source is stereo, use a stereo phone jack to make connections.

9.L/MONO, R (line output) jacks

Connect your audio cables from these jacks to your mixer or powered monitor system (powered speakers) etc. If you wish to make monaural connections, connect the L/ MONO jack.

10. (headphone jack)

A set of stereo headphones fitted with a stereo 1/4” jack plug can be connected here.

12

Image 12

Contents Page FCC Regulation Warning for U.S.A CE mark for European Harmonized StandardsContents Pattern mode Directly sampling the sound of the ES-1 ResamplingSong mode Global modeAppendices Main features IntroductionData you create on the ES-1 Adapter cable holder Power switch AC Local Voltage Make connections and playExample connections Preparing to playConnector section Front and rear panelCommon section Effect section Part Edit sectionFront and rear panel Part Select section Sequence Control sectionStep Key section Select keyConnector section Power switchConceptual diagram of the ES-1 What is a Song?Basic operation Quick Start Listening to a SongWhat is a Pattern? What is a Sample?Listening to a Pattern Listening to a SampleUsing the dial to change the tempo Using the Tap Tempo key to change the tempoTrying out the functions Changing the tempo of a song or patternEditing the effect and delay settings What is the Part Edit section?Modifying editing the sound Striking the part keys along with a song or patternBasic operation Quick Start Using the step keys to edit the rhythm Step Recording What is a Rhythm Pattern?What is Length? Modifying editing a rhythm patternUsing the part keys to edit the rhythm Realtime Recording EraseSaving a pattern you create Write Using a Motion Sequence What is a Motion Sequence?Connecting various sources to the audio inputs Input from CD or MD, etc Peak LEDSound input from Audio Sound heard from Audio In line outputLet’s record a sample Input from CD or MD, etcAssigning a sample sound to a sample part About the Slice functionAbout the Resample function Sample soundUsing the ES-1 as a tone generator module What is Pattern Set?Playing with Pattern Set Midi keyboard etcSynchronizing with an EA-1 or ER-1 Sample mode Selecting a samplePlaying a sample Recording a sampleSpecifying the start location Specifying the end locationSpecifying the fade-out Length Directly sampling the sound ES-1 ResamplingResampling from the middle of a Pattern or song Resampling just one note of a partSlice Creating a slice sample Time SliceScale/Beat End Start Before Truncate After Truncate Sample mode Other functions for editing SampleTips for achieving good results With Time Slice NormalizeOnce a sample has been deleted, it cannot be recovered Deleting a sample Delete SampleSaving a sample Write Checking the remaining Amount of sampling area MemoryPattern mode Setting the playback tempoPlaying a pattern Pattern PlayDisplay when no parts are soloed Solo one part Selecting partsPart Mute function Part Solo functionCreating a pattern Assigning a sampleEditing effect and delay Ring Mod. ring modulation Pitch ShifterCompressor DecimatorLength, Scale/Beat settings Time delay time Msec .. sec For BPM Sync 1/4...8Motion Seq motion sequence BPM SyncSwing settings Setting the LengthSetting the Scale/Beat 16, 32, tri, tr2 Pattern modeSetting the Roll Type Using the step keys Step RecordingUsing the part keys Realtime Recording Creating a Rhythm PatternMotion sequence Playing a motion sequenceRecording a motion sequence Playing an effect motion sequencePlaying a delay motion sequence Recording a delay motion SequenceThere will be no effect if the delay Motion Seq is off dark Checking motion dataConvenient functions for Editing patterns Erasing rhythm pattern data from Copying a part Copy PartPart Erasing data during playback or recording EraseData Copy within a pattern Copy Pattern dataEditing motion sequence Data Selecting a motion sequenceEditing the parameter values of a Motion sequence Using Pattern Set to perform Pattern Set Play Pattern SetRegistering a pattern for Pattern Set Pattern setSaving a pattern Write Song mode Selecting a songPlaying a song Song Play Song mode Creating a songCreating a song from scratch Erasing song data Clear SongEditing a song Inserting a pattern at a specified posi Tion Insert PatternDeleting a pattern from a specified Position Delete Pattern Changing the pattern for a specific positionDeleting event data from a song Checking for song event dataSaving a song Write Global mode Metronome settingsGlobal mode Metronome OFF, r-0, r-1, r-2, onSetting the Midi note num Ber for each part Note No Audio In Mode Monaural, St. stereoMidi ch Using SmartMediaTM Formatting Smart Media FormatLoading all data from SmartMedia To the ES-1 All Load Saving data to SmartMedia SaveSaving your changes Global mode Write With the factory settings, this is turned onMemory Protect Protect Loading only a single sample From SmartMedia Sample LoadAppendices About MidiTroubleshooting Transmitting sound settings Other data Data DumpEditing sounds etc Error messages SpecificationsIndex Troubleshooting PatternPlay Rhythm Set 11, 25 Write Pattern Set PlayPattern Name List Sample Name ListSong Name List BankMidi Implementation Chart Sampler2000.5.15 Transmitted Recognized Remarks FunctionKorg INC