5. Pattern mode
Pattern Set
Pattern Set is a function that lets you assign your favorite pat- terns to each of the sixteen step keys, and switch them at the touch of a key.
During playback, you can successively switch patterns to per- form a song.
By using the Select key in conjunction with this to switch pat- tern set groups, you can register and select 16 ⋅ 4 (total of 64) patterns.
Using Pattern Set to perform
(Pattern Set Play)
Press the Play/Pause key to begin playback.
Hold down the Pattern Set key and press a step key to switch to the pattern that was registered for that step key.
By holding down the Pattern Set key and pressing a Select key, you can switch to a different group of registered pattern sets. The pattern set group will be indicated by the lower line of the Select LEDs (red).
By holding down the Shift key and pressing the Pattern Set key, you can hold the Pattern Set function (the key will light).
To defeat the Hold condition, press the Pattern Set key once again (the key will go dark).
Example
Step key | 1 | 2 | 3 | 4 | 5 |
| 14 | 15 | 16 |
Select LED |
| ||||||||
|
|
|
|
|
|
|
|
| |
1 | A01 | A30 | B03 | B04 | A51 |
| A31 | B43 | B61 |
2 | B21 | B23 | B56 | B64 | B28 |
| B21 | A07 | A08 |
|
|
|
|
|
|
|
|
|
|
3 | B01 | B02 | B04 | B62 | A04 |
| A05 | A45 | A64 |
4 | A11 | A12 | A13 | A14 | A15 |
| A24 | A25 | A26 |
Pattern set 1 |
|
| Pattern set 3 |
| |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hold down the Shift key and press the Pattern Set key to hold the function
In Pattern Set Play, the timing at which patterns will change, tempo adjustment, and functions such as Reset & Play etc. are the same as for Pattern Play.
Pattern Set cannot be used during recording. When you enter recording (ready) mode, Pattern Set will be can-
celled.
Registering a pattern for
Pattern Set
1.With playback stopped, continue pressing the Pattern Set key (or Hold it) and press the step key for the location that you wish to register.
2.While continuing to press the Pattern Set key (or while Hold is still in effect), rotate the dial to select the pattern number that you wish to register. Release the Pattern Set key (or de- feat Hold) to complete the registration process.
3.To save the pattern set registrations, press the Stop/Cancel key to stop playback. Continue pressing the Pattern Set key, and press the Write key (the Write key will blink).
4.The display will blink "PSt." Press the Write key once again to save the data.
To cancel, press the Stop/Cancel key.
If the Global mode Memory Protect setting is on, it will not be possible to write the data. In this case, turn off the Global mode Memory Protect setting before you execute the Write operation.
Never turn the power off during the Write operation. This may damage the data.
2 |
3,4 |
1,2 1
46