PERATING INSTRUCTIONS Cont.
MIDI SETTING AND RUNNING
MIDI SETTING
Touch and hold (FIG.1.) CHASE 9, CHASE 10, CHASE 11,CHASE 12, while power is being turned on.
CHASE 1, CHASE 2, CHASE 3 LEDs blink rapidly and (FIG14.) LCD DIGITAL DISPLAY READS
AAAthis means console is in MIDI mode.
1.CHASE 1 MIDI SEND / CHASE 2 MIDI RECEIVE
Touch CHASE 1 or CHASE 2 the LEDs blinks and go out. MIDI channel is defined, as CHANNEL
2.CHASE 3 MIDI MEMORY DUMP.
Touch CHASE 3, LED lights, and other turn off. touch once more to transmit memory information, when the LED blinks, transmission is done. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE the LEDs of CHASE 1, CHASE 2, CHASE 3 light. Touch (FIG 7.) AUDIO PERCENT TRAITS CHASE once more to exit from MIDI and to return to MANUAL mode.
MIDI RUNNING
1.NOTE ON / NOTE OFF
To receive note on / note off information touch (FIG 2.) CHANNEL
tion is sent with maximum speed. |
|
NOTE NUMBER | CHANNEL |
Touch KEY to send PROGRAM CHANGE infor mation or to receive PROGRAM CHANGE informa- tion and to run.
NOTE CHNG NUMBER | CHANNEL |
PROGRAM CHNG NUMBER | FUNCTION |
0 - 23 | TURN ON CHASE |
24 - 47 | TURN OFF CHASE |
96 | SINGLE CHASE |
97 | MIX CHANNEL |