Read this first | Read this first |
When you start the projection for the first time or after the projector is initialised (Æpage 42), the LANGUAGE menu and the INITIAL SETTING menu will be displayed.
Set those menus according to the usage conditions and environment.
The setting can be changed by navigating through the ON SCREEN MENU.
JJLANGUAGE
Select the required language setting. (Æpage 35)
1111 Press ▲▼◄►buttons of the remote control or control panel on the projector to highlight the required language.
PLEASE SELECT LANGUAGE |
SELECT |
ENTER |
2222 Press the ENTER button to proceed to the next INITIAL SETTING menu.
JJINITIAL SETTING
Select the required setting of INSTALLATION and
HIGH ALTITUDE MODE.
1111 Press ▲▼buttons to select the required menu.
2222 Press ◄►buttons to change the settings of INSTALLATION or HIGH ALTITUDE MODE.
INITIAL SETTING |
|
INSTALLATION | FRONT/DESK |
HIGH ALTITUDE MODE | OFF |
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft). | |
| RETURN |
SELECT | ENTER |
| |
zzINSTALLATION (Æpage 16, 39) | |
| FRONT/ | Setting on a desk/floor and |
| DESK | projecting from front |
| FRONT/ | Mounting in the ceiling with a ceiling |
| mount bracket (sold separately) and | |
| CEILING | projecting from front |
| REAR/ | Setting on a desk/floor and |
| projecting from rear (Translucent | |
| DESK | |
| screen is required) | |
|
| |
| REAR/ | Mounting in the ceiling with a ceiling |
| mount bracket (sold separately) and | |
| CEILING | projecting from rear (Translucent |
|
| screen is required) |
zzHIGH ALTITUDE MODE (Æpage 8, 39) | ||
|
|
|
| OFF | For use in normal environment |
| ON | For use at high altitude (above |
| 1 400 m (4 593 ft)) | |
|
| |
Preparation
3333 Press the ENTER button to finish.
Remarks
zzTo return to the LANGUAGE menu, press the RETURN button in the INITIAL SETTING menu.
ENGLISH - 11
