Panasonic TQBJ0302 manual Projecting an image, Selecting the input signal, Positioning the image

Projecting an image Projecting an image

Confirm the connections of the peripheral devices (Æpage 17, 18) and power cord (Æpage 19). Switch on the power (Æpage 21) and the projector starts projecting. Select the input signal and adjust the image.

Selecting the input signal

1 ) Switch on the connected devices.

When playing a connected DVD player, if SIGNAL SEARCH in the DISPLAY OPTION menu is set to ON, the input signal is detected and projected automatically when the projector is switched on. (Æpage 37)

zzSet the INPUT GUIDE under the ON-SCREEN DISPLAY in the DISPLAY OPTION menu to DETAILED. If the projector cannot detect any input signal, the Computer connection guidance will display. (Æpage 36)

2 ) Select an input signal.

The image selected with the INPUT SELECT button is projected. (Æpage 24)

Note

zzChange the setting of the PICTURE menu according to the connected device and DVD, video tape, etc., to be played. (Æpage 31)

zzConfirm the aspect ratio of the screen and image. Select the optimum aspect ratio. (Æpage 33)

Positioning the image

When setting up the projector for the first time or setting up at a new place, you must perform the following operations.

1111Adjust the vertical angle of the projector.

zzPlace the projector at the right angle from the screen.

zzPress the adjuster buttons and adjust the vertical projection angle. Then, adjust the projected image to the center of the screen.

2222 Adjust the projection size and focus.

zzRemove the Zoom-Focus ring cover (Æpage 12) and turn the zoom and focus rings to adjust the projected image. After adjusting, be sure to install the Zoom-Focus ring cover to protect from dust.

Zoom ring

(ZOOM)

Focus ring (FOCUS)

Remarks

zzWhen you adjust the zoom after adjusting the focus, you may need to adjust the focus of the image again. zzIf keystone distortion occurs, see “KEYSTONE”. (Æpage 32)

Basic Operation

ENGLISH - 23