Panasonic TQBJ0302 manual Remotecontrolcontrolope ationoperation, Capturing an image

Remotecontrolcontrolope ationoperation

Basic Operation

Capturing an image

You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the connected device.

Press button.

Press the FREEZE button again to escape.

Stopping the projection temporarily

You can stop the projection and audio sound through the projector temporarily.

Press button.

Press the AV MUTE button again to escape.

Switching the input signal

JJNETWORK (PT-LB90NTU only)

Press button.

Signal transmitted by “Wireless NETWORK Manager” from computer through

network (Æpage 45)

JJVIDEO

Press button.

Press the VIDEO button to cycle through the options.

S-VIDEO	Signal input to S-VIDEO IN
	terminal
VIDEO	Signal input to VIDEO IN terminal

If INPUT GUIDE under the ON-SCREEN DISPLAY in the DISPLAY OPTION menu is set to DETAILED (Æpage 36), you can confirm the selected input terminal in the graphical input terminal guide at the upper right of the screen. (Highlighted in yellow is the selected terminal.)

You can change the input with ▲▼◄► buttons.

It may take some time to change the image after the input signal is switched.

Note

zzInput a compatible signal shown in the “List of compatible signals”. (Æpage 52)

Remarks

zzFor the input terminals, see “Connections”. (Æpage 17)

zzIf no operation is performed, the input guide disappears automatically.

zzIf the INPUT SELECT button on the control panel is pressed, the input is switched in the following order. (Æpage 12)

COMPUTER1 COMPUTER2 S-VIDEO

You can switch the input signal corresponding to the computer to be projected.

JJCOMPUTER

Press button.

NETWORK *1

**** PT-LB90NTU only

VIDEO

Press the COMPUTER button to cycle through the options.

COMPUTER1	Signal input to COMPUTER1 IN
	terminal
COMPUTER2	Signal input to COMPUTER2 IN
	terminal

24 - ENGLISH