Sagem 929, 926, 920, 922 Setting the alarm, Rng & Beep/Alarm, To use your phone for wake-up calls

8.3 Selecting the volume and the type of ringing tone

You can command your phone to ring when receiving calls and/or short messages.

RNG & BEEP/HANDSET/ OUT.CALLS

Select melody for calls to handset.

A wide variety of melodies are available (including a “silent ring”) as well as a number of settings, including a crescendo.

31

8.4 Setting the alarm

RNG & BEEP/ALARM

To use your phone for wake-up calls:

With the scrolling arrows, set the waking time (hours), validate by pressing Ok then set the minutes and validate.

The alarm function is represented on the screen by the symbol .

Permanent flashing of this symbol indicates that an alarm time has been

RNG & BEEP/HANDSET/MESSAGES Select melody for messages to handset.

RNG & BEEP/FREE HAND/OUT.CALLS Select melody for calls in hands-free mode.

RNG & BEEP/FREE HAND/MESSAGES Select melody for messages in hands-free mode.

For each of the above selections, the middle option - AUDIBLE or MUTE - allows you to listen to or bypass the tone test during the setting phase.

Select the desired tone by pressing the scrolling arrows, then validate.

Display ACTIVE by pressing the scrolling arrows.

Validate.

Ringing stops by pressing any key; the wake-up time remains programmed.

The wake-up function remains active even with the phone OFF. Neither is it affected by the SILENT ringing mode.

programmed but the date and time clock has not been initialised.

Select the desired volume by pressing the scrolling arrows, then validate (from 1 to 4 and + for crescendo setting).

8. Ringing tones and vibrator